Optimalisation of Flying Shears Control Structure Using AI Methods
References
- Bi, J., Fan, W., Huang, H. and Liu, B. (2020). Reliability Design of an Electronic cam Curve for Flying Shear Machine in Short Materials Cutting. Journal of Shanghai Jiaotong University (Science), 25, pp. 246–252. doi: 10.1007/s12204-019-2106-2
- Bose, B. K. (2007). Neural Network Applications in Power Electronics and Motor Drives—an Introduction and Perspective. IEEE Transactions on Industrial Electronics, 54(1), pp. 14–33. doi: 10.1109/TIE.2006.888683
- Cinquemani, S. and Giberti, H. (2015). An innovative tool for simulation and control of a flying-cutting machine. In: M. Mains, ed., Topics in Modal Analysis, Volume 10. Conference Proceedings of the Society for Experimental Mechanics Series. pp. 227–235. Cham: Springer, doi.org/10.1007/978-3319-15251-6_21.
- Ďurovský, F., Šlapák, V., Smoleň, P., Kyslan, K. and Spišák, E. (2023). Rotary shears control in material processing lines. In: Proceedings of the 2023 International Conference on Electrical Drives and Power Electronics (EDPE), High Tatras, Slovakia, pp. 1–9. doi:10.1109/EDPE58625.2023.10274059.
- Lee, C. C. (1990a). Fuzzy Logic in Control Systems: Fuzzy Logic Controller – Part I. IEEE Transactions on Systems, 20(2), pp. 404–418. doi: 10.1109/21.52551
- Lee, C. C. (1990b). Fuzzy Logic in Control Systems: Fuzzy Logic Controller – Part II. IEEE Transactions on Systems, Man, and Cybernetics, 20(2), pp. 419–435. doi: 10.1109/21.52552
- Magura, D., Fedák, V. and Kyslan, K. (2014). Modeling and Analysis of Multi-Motor Drive Properties in a Web Processing Continuous Line. Procedia Engineering, 96, pp. 281–288. doi: 10.1016/j.proeng.2014.12.155
- Ng, G., Deleanu, S., Prévost, J.-P. and Carpenter, D. (2017). Improving the operation of a flying dividing shear by using Direct Torque Control. In: 2017 International Conference on Modern Power Systems (MPS), Cluj-Napoca, Romania, pp. 1–8. doi: 10.1109/MPS.2017.7974419.
- Siemens AG (2025). SIMATIC Rotary Knife: Standard Application Manual. Version 1.5.0, Entry ID: 109757260. Siemens Industry Online Support, Siemens AG.
- Šlapák, V., Ďurovský, F., Kyslan, K. and Smoleň, P. (2024). Shearing Work Analysis and Control Design of Rotary Shears in Material Processing Lines. Power Electronics and Drives, 9(44), pp. 482–501. doi: 10.2478/pead-2024-0030
- Solomon, M. G. and Gaiceanu, M. (2021). The optimization of the dynamic regime of the asynchronous vectorial AC motor in flying shear. In: 7th International Symposium on Electrical and Electronics Engineering (ISEEE), Galati, Romania, 1–6. doi: 10.1109/ISEEE53383.2021.9628488.
- Spišák, E., Slota, J., Majerníková, J. and Dulebová, Ľ. (2019). Production Technologies – Forming, Cutting, Injection Molding, 1st ed. Košice: Technical University of Košice, ISBN: 978-8-0553-3383-3380.
- Zhao, S., Blaabjerg, F. and Wang, H. (2021). An Overview of Artificial Intelligence Applications for Power Electronics. IEEE Transactions on Power Electronics, 36(4), pp. 4633–4659. doi: 10.1109/TPEL.2020.3024914
Language: English
Page range: 111 - 127
Submitted on: Dec 30, 2025
Accepted on: Feb 23, 2026
Published on: Feb 21, 2026
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2026 Tadeáš Kmecik, Matej Hric, Peter Girovský, František Ďurovský, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution 4.0 License.