Hybrid Flatness-Based Control of Dual Star Induction Machine Drive System for More Electrical Aircraft

Mokhtar Nesri; Kamal Nounou; Guedida Sifelislam; Mohamed Fouad Benkhoris; Houari Azeddine

doi:10.2478/pead-2024-0004

Abstract

This paper develops a precise method control system for tracking control of a power drive system based on a multi-phase machine under motor parameter and load torque variations. By adding a simple feedforward term based on the flatness theory, a conventional flux oriented control (FOC) can be enforced to have a perfect tracking performance under model parameter and load torque variations. Hence, a hybrid flatness-based control (HFBC) technique is applied to the control of a dual star induction machine (DSIM) and compared to a classical vector control strategy regarding tracking behaviour, robustness, and perturbations rejection. Finally, the simulation and experimental results are provided to verify the effectiveness of the proposed HFBC under uncertainties such as motor parameter and load torque variations. Furthermore, an enhancement of the drive system’s control performances is demonstrated by the improvement of the technique of separation of the objectives of tracking and disturbance rejection. The simulation and experimental results are presented, demonstrating the superiority of the HFBC.

References

Baneira, F., Doval-Gandoy, J., Yepes, A. G., Ĺopez, Ó. and Pérez-Estévez, D. (2017). Control Strategy for Multiphase Drives with Minimum Losses in the Full Torque Operation Range under Single Open-Phase Fault. EEE Transactions on Power Electronics, 32(8), pp. 6275–6285. doi: 10.1109/TPEL.2016.2620426.
Search in Google Scholar Back to article
Barrero, F. and Duran, M. J. (2016). Recent Advances in the Design, Modeling, and Control of Multiphase Machines – Part I. IEEE Transactions on Industrial Electronics, 63(1), pp. 449–458. doi: 10.1109/TIE.2015.2447733.
Search in Google Scholar Back to article
Chiasson, J. (1996). Nonlinear Controllers for an Induction Motor. Control Engineering Practice, 4(7), pp. 977–990. doi: 10.1016/0967-0661(96)00097-4.
Search in Google Scholar Back to article
Chitra, V. and Prabhakar, R. (2006). Induction motor speed control using fuzzy logic controller. World Acad. Sci. Eng. Technol. 2006, 23, 17–22.
Search in Google Scholar Back to article
Dannehl, J. and Fuchs, F.W. (2006). Flatness-based control of an induction machine fed via voltage source inverter-concept, control design and performance analysis. In Proceedings of the IECON 2006-32nd Annual Conference on IEEE Industrial Electronics, Paris, France, 6–10 November 2006; pp. 5125–5130.
Search in Google Scholar Back to article
Fan, L. and Zhang, L. (2011). An Improved Vector Control of an Induction Motor Based on Flatness. Procedia Engineering, 15, pp. 624–628. doi: 10.1016/j.proeng.2011.08.116.
Search in Google Scholar Back to article
Fliess, M., Levine, J., Martin, P. and Rouchon, P. (1995). Flatness and Defect of Non-Linear Sys-tems: Introductory Theory and Examples. International Journal of Control, 61(6), pp. 1327–1361. doi: 10.1080/00207179508921959.
Search in Google Scholar Back to article
Fliess, M., Lévine, J., Martin, P. and Rouchon, P. (1999). A Lie-Bäcklund Approach to Equivalence and Flatness of Nonlinear Systems. IEEE Transactions on Automatic Control, 44(5), pp. 922–937. doi: 10.1109/9.763209.
Search in Google Scholar Back to article
Ishihara, S., Tahara, K. and Hironaka, K. (2020). Feedforward Control Design for Shaking Table by Data Driven Control Considering Control Input Limitation. IFAC-PapersOnLine, 53(2), pp. 9011–9016. doi: 10.1016/j.ifacol.2020.12.2019.
Search in Google Scholar Back to article
Jin, H. Y. and Zhao, X. M. (2019). Extended Kalman Filter-Based Disturbance Feed-Forward Compensation Considering Varying Mass in High-Speed Permanent Magnet Linear Synchronous Motor. Electrical Engineering, 101(2), pp. 537–544. doi: 10.1007/s00202-019-00802-z.
Search in Google Scholar Back to article
Levi, E. (2008). Multiphase Electric Machines for Variable-Speed Applications. IEEE Transactions on Industrial Electronics, vol. 55, no. 5, pp. 1893–1909, May 2008.
Search in Google Scholar Back to article
Levi, E., Bodo, N., Dordevic, O., Jones, M. (2013). Recent advances in power electronic converter control for multiphase drive systems. In Proceedings of the 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), Paris, France, 11–12 March 2013; pp. 158–167.
Search in Google Scholar Back to article
Li, S., Fang, Z., Fukui, Y., Futatsukawa, K., Mizobata, S., Qiu, F., Sato, Y. and Shinozaki, S. (2018). Adaptive feedforward control design Based on Simulink for J-Parc Linac LLRF system. In: 9th International Particle Accelerator Conference, Vancouver, BC, Canada, pp. 2187–2189.
Search in Google Scholar Back to article
Li, T., Xia, Y. and Ma, D. (2015). Flatness-Based Target Tracking for a Quadrotor Unmanned Aer-ial Vehicle. IFAC-PapersOnLine, 48(28), pp. 874–879. doi: 10.1016/j.ifacol.2015.12.240.
Search in Google Scholar Back to article
Liu, Z., Li, Y. and Zheng, Z. (2018). A Review of Drive Techniques for Multiphase Machines. CES Transactions on Electrical Machines and Systems, 2(2), pp. 243–251. doi: 10.30941/cestems.2018.00030.
Search in Google Scholar Back to article
Marino, R., Peresada, S. and Valigi, P. (1993). Adaptive Input-Output Linearizing Control of In-duction Motors. IEEE Transactions Automatic Control, 38(2), pp. 208–221. doi: 10.1109/9.250510.
Search in Google Scholar Back to article
Martin, P., Rouchon, P. and Murray, R. M. (2006). Flat systems, equivalence and trajectory generation. 3rd cycle. Castro Urdiales (Espagne), France. 2006, pp. 81. cel-00392180
Search in Google Scholar Back to article
Martin, P. and Rouchon, P. (1996a). Flatness and Sampling Control of Induction Motors. IFAC Proceedings Volumes, 29(1), pp. 2786–2791. doi: 10.1016/s1474-6670(17)58098-2.
Search in Google Scholar Back to article
Martin, P. and Rouchon, P. (1996b). Two Remarks on Induction Motors. In: CESA’96 IMACS Multiconference. 1996. p. 76-9.
Search in Google Scholar Back to article
Nesri, M., Nounou, K., Marouani, K., Houari, A. and Benkhoris, M. F. (2020). Efficiency Im-provement of a Vector-Controlled Dual Star Induction Machine Drive System. Electrical Engineer-ing, 102(2), pp. 939–952. doi: 10.1007/s00202-020-00924-9.
Search in Google Scholar Back to article
Nounou, K., Benbouzid, M., Marouani, K., Charpentier, J. F. and Kheloui, A. (2018). Performance Comparison of Open-Circuit Fault-Tolerant Control Strategies for Multiphase Permanent Magnet Machines for Naval Applications. Electrical Engineering, 100(3), pp. 1827–1836. doi: 10.1007/s00202-017-0661-9.
Search in Google Scholar Back to article
Ortega, R., Louis, J. and Delaleau, E. (2001). Modeling and Control of Induction Motors. International Journal of Applied Mathematics and Computer Science, 11(1), pp. 105–129. doi: NODOI.
Search in Google Scholar Back to article
Petersen, I. R. and Tempo, R. (2014). Robust Control of Uncertain Systems: Classical Results and Recent Developments. Automatica, 50(5), pp. 1315–1335. doi: 10.1016/j.automatica.2014.02.042.
Search in Google Scholar Back to article
Salem, A. and Narimani, M. (2019). A Review on Multiphase Drives for Automotive Traction Applications. IEEE Trans. Transp. Electrif, 5(4), pp. 1329–1348. doi: 10.1109/TTE.2019.2956355.
Search in Google Scholar Back to article
Singh, K. V., Bansal, H. O. and Singh, D. (2020). Feed-Forward Modeling and Real-Time Implementation of an Intelligent Fuzzy Logic-Based Energy Management Strategy in a Series–Parallel Hybrid Electric Vehicle to Improve Fuel Economy. Electrical Engineering, 102(2), pp. 967–987. doi: 10.1007/s00202-019-00914-6.
Search in Google Scholar Back to article
Wang, K., Zhu, Z. Q., Ren, Y. and Ombach, G. (2015). Torque Improvement of Dual Three-Phase Permanent-Magnet Machine with Third-Harmonic Current Injection. IEEE Transactions on Indus-trial Electronics, 62(11), pp. 6833–6844. doi: 10.1109/TIE.2015.2442519.
Search in Google Scholar Back to article
Wang, X., Wang, Z., Xu, Z., Cheng, M., Wang, W. and Hu, Y. (2019). Comprehensive Diagnosis and Tolerance Strategies for Electrical Faults and Sensor Faults in Dual Three-Phase PMSM Drives. IEEE Transactions on Power Electronics, 34(7), pp. 6669–6684. doi: 10.1109/TPEL.2018.2876400.
Search in Google Scholar Back to article
Xu, Y., Li, F., Jin, Z. and Huang, C. (2015). Flatness-Based Adaptive Control (FBAC) for STATCOM. Electric Power Systems Research, 122, pp. 76–85. doi: 10.1016/j.epsr.2014.12.023.
Search in Google Scholar Back to article

Hybrid Flatness-Based Control of Dual Star Induction Machine Drive System for More Electrical Aircraft

Abstract

Paradigm

My account