References
- Blaabjerg, F., Kazmierkowski, M. P., Zelecehowski, M., Swierczynski, D. and Kolomyjski, W. (2005). Design and comparison direct torque control techniques for induction motors. In: 2005 European Conference on Power Electronics and Applications, pp. 9 pp.-P.9. doi: 10.1109/EPE.2005.21951510.1109/EPE.2005.219515
- Buja, G. S. and Kazmierkowski, M. P. (2004). Direct Torque Control of PWM Inverter-Fed AC Motors - A Survey. IEEE Transactions on Industrial Electronics, 51(4), pp. 744–757. doi: 10.1109/TIE.2004.83171710.1109/TIE.2004.831717
- Foo, G. H. B. and Zhang, X. (2016). Robust Constant Switching Frequency-Based Field-Weakening Algorithm for Direct Torque Controlled Reluctance Synchronous Motors. IEEE Transactions on Industrial Informatics, 12(4), pp. 1462–1473. doi: 10.1109/TII.2016.258564610.1109/TII.2016.2585646
- Grabowski, P. Z., Kazmierkowski, M. P., Bose, B. K. and Blaabjerg, F. (2000). A Simple Direct-Torque Neuro-Fuzzy Control of PWM-Inverter-Fed Induction Motor Drive. IEEE Transactions on Industrial Electronics, 47(4), pp. 863–870. doi: 10.1109/41.85796610.1109/41.857966
- Klimkowski, K. (2016). An Artificial Neural Networks Approach to Stator Current Sensor Faults Detection for DTC-SVM Structure. Power Electronics and Drives, 36(1), pp. 127–138. doi: 10.5277/PED16010910.5277/PED160109
- Malinowski, M., Jasinski, M. and Kazmierkowski, M. P. (2004). Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM). IEEE Transactions on Industrial Electronics, 51(2), pp. 447–454. doi: 10.1109/TIE.2004.82527810.1109/TIE.2004.825278
- Malinowski, M., Kazmierkowski, M. P. and Trzynadlowski, A. M. (2003). A Comparative Study of Control Techniques for PWM Rectifiers in AC Adjustable Speed Drives. IEEE Transactions on Power Electronics, 18(6), pp. 1390–1396. doi: 10.1109/TPEL.2003.81887110.1109/TPEL.2003.818871
- Orłowska-Kowalska, T. and Dybkowski, M. (2016). Industrial Drive Systems. Current State and Development Trends. Power Electronics and Drives, 36(1), pp. 5–25. doi: 10.5277/PED16010110.5277/PED160101
- Pinto, J. O., Bose, B. K., Da Silva, L. B. and Kazmierkowski, M. P. (2000). A Neural-Network-Based Space-Vector PWM Controller for Voltage-Fed Inverter Induction Motor Drive. IEEE Transactions on Industry Applications, 36(6), pp. 1628–1636. doi: 10.1109/28.88721510.1109/28.887215
- Stubenrauch, F., Wittmann, J., Kiermayer, A., Seliger, N., Hagl, R., Schmitt-Landsiedel, D. and Kennel, R. (2017). FPGA-based high dynamic servo drive control with a 200 kHz Gallium Nitride inverter. In: 2017 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe), Warsaw, pp. P.1–P.10. doi: 10.23919/EPE17ECCEEurope.2017.8098997
- Swierczynski, D. and Kazmierkowski, M. P. (2002). Direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM)-simulation and experimental results. In: IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02, pp. 751–755. doi: 10.1109/IECON.2002.1187601
- Swierczynski, D., Kazmierkowski, M. P. and Blaabjerg, F. (2002). DSP based direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM). In: Proceedings of the 2002 IEEE International Symposium on Industrial Electronics, pp. 723–727. doi:10.1109/ISIE.2002.102582110.1109/ISIE.2002.1025821
- Vajsz, T. and Számel, L., (2018). Overload-Capability Analysis of PMSM Servo- and Robot-Drives Using DTC-SVM Methods: Part 1. In: 2018 IEEE 18th International Power Electronics and Motion Control Conference (PEMC), Budapest, pp. 730–736. doi: 10.1109/EPEPEMC.2018.852192910.1109/EPEPEMC.2018.8521929
- Vajsz, T., Számel, L. and Handler, Á. (2019). An Investigation of Direct Torque Control and Hysteresis Current Vector Control for Motion Control Synchronous Reluctance Motor Applications. Power Electronics and Drives, 39(1), pp. 1–12.
- Vajsz, T., Számel, L. and Rácz, G. (2017). A Novel Modified DTC-SVM Method with Better Overload-capability for Permanent Magnet Synchronous Motor Servo Drives. Periodica Polytechnica Electrical Engineering and Computer Science, 61(3), pp. 253–263. doi: 10.3311/PPee.1042810.3311/PPee.10428
- Zelechowski, M., Kazmierkowski, M. P. and Blaabjerg, F. (2005). Controller design for direct torque controlled space vector modulated (DTC-SVM) induction motor drives. In: Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE 2005), pp. 951–956. doi: 10.1109/ISIE.2005.152905210.1109/ISIE.2005.1529052
- Tarczewski, T., Skiwski, M., Grzesiak, L. M. and Zielinski, M. (2018). PMSM Servo-Drive Fed by SiC MOSFETs Based VSI. Power Electronics and Drives, 38(1), pp. 35–45. doi: 10.2478/pead-2018-000110.2478/pead-2018-0001
- Zhang, X. and Foo, G. H. B. (2019). Overmodulation of Constant-Switching-Frequency-Based DTC for Reluctance Synchronous Motors Incorporating Field-Weakening Operation. IEEE Transactions on Industrial Electronics, 66(1), pp. 37–47. doi: 10.1109/TIE.2018.282647810.1109/TIE.2018.2826478