Analysis of Direct Torque Control with pace Vector Modulation for Synchronous Reluctance Motor Motion Control Applications and a Comparison with Other Torque-Control Algorithms

Vajsz, Tibor; Számel, László; Handler, Árpád

doi:10.2478/pead-2019-0010

Abstract

Motion control is facing an increasing popularity in the present research activities. Owing to the expected wide spreading of motion control applications, it can be predicted that the advancements in the field of electric motor drives will have a high level of influence on the new results in the field of motion control. The synchronous reluctance motor drives mean an excellent and yet cost-effective solution for actuators in motion control applications. In this article, the direct torque control with space vector modulation is analysed as a possible candidate for synchronous reluctance motor motion control applications. Its torque-control performance is investigated as a function of torque-control sample time, and a comparison of the torque ripples is made with other torque-control algorithms by an FFT analysis.

References

Blaabjerg, F., Kazmierkowski, M. P., Zelecehowski, M., Swierczynski, D. and Kolomyjski, W. (2005). Design and comparison direct torque control techniques for induction motors. In: 2005 European Conference on Power Electronics and Applications, pp. 9 pp.-P.9. doi: 10.1109/EPE.2005.21951510.1109/EPE.2005.219515
Open DOI Search in Google Scholar Back to article
Buja, G. S. and Kazmierkowski, M. P. (2004). Direct Torque Control of PWM Inverter-Fed AC Motors - A Survey. IEEE Transactions on Industrial Electronics, 51(4), pp. 744–757. doi: 10.1109/TIE.2004.83171710.1109/TIE.2004.831717
Open DOI Search in Google Scholar Back to article
Foo, G. H. B. and Zhang, X. (2016). Robust Constant Switching Frequency-Based Field-Weakening Algorithm for Direct Torque Controlled Reluctance Synchronous Motors. IEEE Transactions on Industrial Informatics, 12(4), pp. 1462–1473. doi: 10.1109/TII.2016.258564610.1109/TII.2016.2585646
Open DOI Search in Google Scholar Back to article
Grabowski, P. Z., Kazmierkowski, M. P., Bose, B. K. and Blaabjerg, F. (2000). A Simple Direct-Torque Neuro-Fuzzy Control of PWM-Inverter-Fed Induction Motor Drive. IEEE Transactions on Industrial Electronics, 47(4), pp. 863–870. doi: 10.1109/41.85796610.1109/41.857966
Open DOI Search in Google Scholar Back to article
Klimkowski, K. (2016). An Artificial Neural Networks Approach to Stator Current Sensor Faults Detection for DTC-SVM Structure. Power Electronics and Drives, 36(1), pp. 127–138. doi: 10.5277/PED16010910.5277/PED160109
Open DOI Search in Google Scholar Back to article
Malinowski, M., Jasinski, M. and Kazmierkowski, M. P. (2004). Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM). IEEE Transactions on Industrial Electronics, 51(2), pp. 447–454. doi: 10.1109/TIE.2004.82527810.1109/TIE.2004.825278
Open DOI Search in Google Scholar Back to article
Malinowski, M., Kazmierkowski, M. P. and Trzynadlowski, A. M. (2003). A Comparative Study of Control Techniques for PWM Rectifiers in AC Adjustable Speed Drives. IEEE Transactions on Power Electronics, 18(6), pp. 1390–1396. doi: 10.1109/TPEL.2003.81887110.1109/TPEL.2003.818871
Open DOI Search in Google Scholar Back to article
Orłowska-Kowalska, T. and Dybkowski, M. (2016). Industrial Drive Systems. Current State and Development Trends. Power Electronics and Drives, 36(1), pp. 5–25. doi: 10.5277/PED16010110.5277/PED160101
Open DOI Search in Google Scholar Back to article
Pinto, J. O., Bose, B. K., Da Silva, L. B. and Kazmierkowski, M. P. (2000). A Neural-Network-Based Space-Vector PWM Controller for Voltage-Fed Inverter Induction Motor Drive. IEEE Transactions on Industry Applications, 36(6), pp. 1628–1636. doi: 10.1109/28.88721510.1109/28.887215
Open DOI Search in Google Scholar Back to article
Stubenrauch, F., Wittmann, J., Kiermayer, A., Seliger, N., Hagl, R., Schmitt-Landsiedel, D. and Kennel, R. (2017). FPGA-based high dynamic servo drive control with a 200 kHz Gallium Nitride inverter. In: 2017 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe), Warsaw, pp. P.1–P.10. doi: 10.23919/EPE17ECCEEurope.2017.809899710.23919/EPE17ECCEEurope.2017.8098997
Search in Google Scholar Back to article
Swierczynski, D. and Kazmierkowski, M. P. (2002). Direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM)-simulation and experimental results. In: IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02, pp. 751–755. doi: 10.1109/IECON.2002.118760110.1109/IECON.2002.1187601
Search in Google Scholar Back to article
Swierczynski, D., Kazmierkowski, M. P. and Blaabjerg, F. (2002). DSP based direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM). In: Proceedings of the 2002 IEEE International Symposium on Industrial Electronics, pp. 723–727. doi:10.1109/ISIE.2002.102582110.1109/ISIE.2002.1025821
Open DOI Search in Google Scholar Back to article
Vajsz, T. and Számel, L., (2018). Overload-Capability Analysis of PMSM Servo- and Robot-Drives Using DTC-SVM Methods: Part 1. In: 2018 IEEE 18th International Power Electronics and Motion Control Conference (PEMC), Budapest, pp. 730–736. doi: 10.1109/EPEPEMC.2018.852192910.1109/EPEPEMC.2018.8521929
Open DOI Search in Google Scholar Back to article
Vajsz, T., Számel, L. and Handler, Á. (2019). An Investigation of Direct Torque Control and Hysteresis Current Vector Control for Motion Control Synchronous Reluctance Motor Applications. Power Electronics and Drives, 39(1), pp. 1–12.10.2478/pead-2019-0009
Search in Google Scholar Back to article
Vajsz, T., Számel, L. and Rácz, G. (2017). A Novel Modified DTC-SVM Method with Better Overload-capability for Permanent Magnet Synchronous Motor Servo Drives. Periodica Polytechnica Electrical Engineering and Computer Science, 61(3), pp. 253–263. doi: 10.3311/PPee.1042810.3311/PPee.10428
Open DOI Search in Google Scholar Back to article
Zelechowski, M., Kazmierkowski, M. P. and Blaabjerg, F. (2005). Controller design for direct torque controlled space vector modulated (DTC-SVM) induction motor drives. In: Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE 2005), pp. 951–956. doi: 10.1109/ISIE.2005.152905210.1109/ISIE.2005.1529052
Open DOI Search in Google Scholar Back to article
Tarczewski, T., Skiwski, M., Grzesiak, L. M. and Zielinski, M. (2018). PMSM Servo-Drive Fed by SiC MOSFETs Based VSI. Power Electronics and Drives, 38(1), pp. 35–45. doi: 10.2478/pead-2018-000110.2478/pead-2018-0001
Open DOI Search in Google Scholar Back to article
Zhang, X. and Foo, G. H. B. (2019). Overmodulation of Constant-Switching-Frequency-Based DTC for Reluctance Synchronous Motors Incorporating Field-Weakening Operation. IEEE Transactions on Industrial Electronics, 66(1), pp. 37–47. doi: 10.1109/TIE.2018.282647810.1109/TIE.2018.2826478
Open DOI Search in Google Scholar Back to article

Analysis of Direct Torque Control with pace Vector Modulation for Synchronous Reluctance Motor Motion Control Applications and a Comparison with Other Torque-Control Algorithms

Abstract

Paradigm

My account