Sufficient Sampling to Determine the Cover Depth of Reinforcement and Carbonation Depth for In-use and Reclaimed Concrete Elements

Räsänen, Aapo; Lahdensivu, Jukka

doi:10.2478/ncr-2025-0025

Abstract

This study addresses how many samples are sufficient to reliably estimate the cover depth of reinforcement and the carbonation depth of indoor load-bearing concrete elements. A Monte Carlo simulation with 10,000 iterations for extreme values of real cases was used to evaluate the standard error of the mean for different numbers of samples. To evaluate the cover depth of reinforcement, the simulation results suggest that 150 measurements are statistically sufficient for a certain reinforcement type and for each element type. However, hollow-core slabs can be treated as a distinct population due to their consistently low variability in cover depth. Reliable preliminary estimate can be obtained with only 10 measurements, while 30 measurements are sufficient to achieve high statistical reliability. To estimate the carbonation depth, 12-14 samples are recommended. The carbonation depth varies between elements and among samples, so the utmost care should be taken when determining sampling spot and the value for an individual sample.

References

Kim Y., Hanif A., Usman M., Munir M.J., Kazmi S.M.S. & Kim S.: “Slag waste incorporation in high early strength concrete as cement replacement: Environmental impact and influence on hydration & durability attributes”. Journal of Cleaner Production, Vol. 172, 2018, 10 pp. https://doi.org/10.1016/j.jclepro.2017.11.105.
Search in Google Scholar Back to article
Wang B., Yan L., Fu Q. & Kasal B.: “A Comprehensive Review on Recycled Aggregate and Recycled Aggregate Concrete”. Resources, Conservation & Recycling, Vol.171, 2021, 29 pp. https://doi.org/10.1016/j.resconrec.2021.105565.
Search in Google Scholar Back to article
Kisku N., Joshi H., Ansari M., Panda S.K., Nayak S. & Dutta S.C.: “A critical review and assessment for usage of recycled aggregate as sustainable construction material”. Construction and Building Materials, Vol. 131, 2017, 20 pp. http://dx.doi.org/10.1016/j.conbuildmat.2016.11.029.
Search in Google Scholar Back to article
Mettke A. “Material- und Produktrecycling – am Beispiel von Plattenbauten” (Material and product recycling – using the example of prefabricated buildings). Brandenburg University of Technology Cottbus – Senftenberg, 2010, 363 pp. (In German).
Search in Google Scholar Back to article
Küpfer C., Bastien-Masse M. & Fivet C.: “Reuse of concrete components in new construction projects: Critical review of 77 circular precedents”. Journal of Cleaner Production, Vol. 383, No. 135235, 2023, 26 pp. https://doi.org/10.1016/j.jclepro.2022.135235.
Search in Google Scholar Back to article
Rakhshan K., Morel J-C., Alaka H. & Charef R.: “Components reuse in the building sector – A systematic review”. Waste Management & Research, Vol. 38, No. 4, 2020, 24 pp. https://doi.org/10.1177/0734242X20910463.
Search in Google Scholar Back to article
Devènes J., Bastien-Masse M. & Fivet C.: “Reusability assessment of reinforced concrete components prior to deconstruction from obsolete buildings”. Journal of Building Engineering, Vol 84, No. 108584, 2024, 19 pp. https://doi.org/10.1016/j.jobe.2024.108584.
Search in Google Scholar Back to article
Neville A.: “Properties of Concrete”. Harlow: Pearson Education Limited, Edinburgh, Scotland, 2011, 5^th Ed., 846 pp.
Search in Google Scholar Back to article
Bungey J., Millard S. & Grantham M.: “Testing of Concrete in Structures”. Taylor & Francis Group, London, UK, 2018, 4^th Ed., 352 pp.
Search in Google Scholar Back to article
Chang C-F. & Chen J-W.: “The experimental investigation of concrete carbonation depth”. Cement and Concrete Research, Vol. 36, 2006, 8 pp. https://doi.org/10.1016/j.cemconres.2004.07.025.
Search in Google Scholar Back to article
Broomfield J.: “Corrosion of steel in concrete”. Taylor & Francis, London, UK, 2007, 2^nd Ed., 296 pp.
Search in Google Scholar Back to article
Tuutti K.: “Corrosion of steel in concrete”. Swedish Cement and Concrete Research Institute, Stockholm, Sweden, 1982, 468 pp.
Search in Google Scholar Back to article
Hunkeler, F.: “Grundlagen der Korrosion und der Potentialmessung bei Stahlbetonbauwerken“. (Basics of corrosion and potential measurement in reinforced concrete structures). FA 86/90, Bericht VSS No. 510, Eidgenössisches Verkehrs- und Energiewirtschaftsdepartement, Bundesamt für Strassenbau, Schweizerische Gesellschaft für Korrosionsschutz, Zürich, Switzerland, 1994, 166 pp. (In German).
Search in Google Scholar Back to article
Hunkeler, F.: “Anforderungen an den Karbonatisierungswiderstanden von Betonen“. (Requirements for the carbonation resistance of concrete). FA 012, Bericht VSS No. 649, TFB AG – Technik und Forschung im Betonbau, Wildegg, Switzerland, 2008, 191 pp. (In German).
Search in Google Scholar Back to article
Merah A., Korichi Y. & Khenfer M.M.: “Effect of cement types on carbonation depth of concrete”. Journal of Building Materials and Structures, Vol. 7, 2020, 8 pp. https://doi.org/10.34118/jbms.v7i1.706.
Search in Google Scholar Back to article
Bier T.A.: “Influence of type of cement and curing on carbonation progress and pore structure of hydrated cement paste”. Materials Research Society Symposium, Vol. 85, No. 123, 1987. https://doi.org/10.1557/PROC-85-123.
Search in Google Scholar Back to article
Paul S.C., Panda B., Huang Y., Garg A. & Peng X.: “An empirical model design for evaluation and estimation of carbonation depth in concrete”. Measurement, Vol. 124, 2018, 6 pp. https://doi.org/10.1016/j.measurement.2018.04.033.
Search in Google Scholar Back to article
Ben Bassat M., Nixon P.J. & Hardcastle J.: “The effect of differences in the composition Portland cement on the properties of hardened concrete”. Magazine of concrete research, Vol. 42, No. 151, 1990, pp. 59-66. https://doi.org/10.1680/macr.1990.42.151.59.
Search in Google Scholar Back to article
Lahdensivu J.: “Durability Properties and Actual Deterioration of Finnish Concrete Facades and Balconies”. No. 1028 (PhD Thesis), Tampere University of Technology, Dept. of Civil Engineering, Tampere, Finland, 2012, 156 pp. https://urn.fi/URN:ISBN:978-952-15-2823-1.
Search in Google Scholar Back to article
Liu P., Yu Z. & Chen Y.: “Carbonation depth model and carbonated acceleration rate of concrete under different environment”. Cement and Concrete Composites, Vol. 114, 2020, 16 pp. https://doi.org/10.1016/j.cemconcomp.2020.103736.
Search in Google Scholar Back to article
Liu M., Ju X., Wu L., Guo Q., Wang H. & Zhang W.: “Carbonation depth model for loaded reinforced concrete (RC) beams under time-dependent relative humidity conditions”. Journal of Building Engineering, Vol. 65, 2023, 16 pp. https://doi.org/10.1016/j.jobe.2022.105618.
Search in Google Scholar Back to article
Peng J., Tang H., Zhang J. & Cai S.C.S.: “Numerical Simulation on Carbonation Depth of Concrete Structures considering Time- and Temperature-Dependent Carbonation Process”. Advances in Materials Science and Engineering, 2018, 16 pp. https://doi.org/10.1155/2018/2326017.
Search in Google Scholar Back to article
Chen Y., Liu P. & Yu Z.: “Effects of Environmental Factors on Concrete Carbonation Depth and Compressive Strength”. Materials, Vol. 11, No. 2167, 2018, 12 pp. https://doi.org/10.3390/ma11112167.
Search in Google Scholar Back to article
Wang J., Su H. & Du J.: “Influence of coupled effects between flexural tensile stress and carbonation time on the carbonation depth of concrete”. Construction and Building Materials, Vol. 190, 2018, 13 pp. https://doi.org/10.1016/j.conbuildmat.2018.09.117.
Search in Google Scholar Back to article
Wang W., Lu C., Li Y., Yuan G. & Li Q.: “Effects of stress and high temperature on the carbonation resistance of fly ash concrete”. Construction and Building Materials, Vol. 138, 2017, 10 pp. http://dx.doi.org/10.1016/j.conbuildmat.2017.02.039.
Search in Google Scholar Back to article
Huo Z., Wang L. & Huang Y.: “Predicting carbonation depth of concrete using a hybrid ensemble model”. Journal of Building Engineering, Vol. 76, No. 107320, 2023, 27 pp. https://doi.org/10.1016/j.jobe.2023.107320.
Search in Google Scholar Back to article
RILEM TC: “CPC 18 Measurement of hardened concrete carbonation depth”. RILEM Recommendations for the Testing and Use of Construction Materials, E & FN SPON, 1994, pp. 56-58. DOI: 10.1617/2351580117.026.
Search in Google Scholar Back to article
EN 12390-10:2019: “Testing hardened concrete. Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide”. European Committee of Standardization, 2019, 24 pp.
Search in Google Scholar Back to article
Mi R. & Pan G.: “Inhomogeneities of carbonation depth distributions in recycled aggregate concretes: A visualization and quantification study”. Construction and Building Materials, Vol. 330, No. 127300, 2022, 11 pp. https://doi.org/10.1016/j.conbuildmat.2022.127300.
Search in Google Scholar Back to article
Kwon S-H., Lee J-S. Kwon S-J. & Kim H-K: “On determination of characteristic in-situ carbonation depth from existing concrete structures”. Construction and Building Materials, Vol. 442, No. 137522, 2024, 11 pp. https://doi.org/10.1016/j.conbuildmat.2024.137522.
Search in Google Scholar Back to article
Devore, J.L.: “Probability and Statistics for Engineering and the Sciences”. Cengage Learning, US, 2015, 9^th Ed., 768 pp.
Search in Google Scholar Back to article
Fisher R.A.: “Statistical methods for research workers”. Oliver & Boyd, Edinburgh, Scotland, 1970, 14^th Ed., 378 pp.
Search in Google Scholar Back to article
EN 206:2014 + A2:2021: “Concrete. Specification, performance, production and conformity”. European Committee of Standardization, 2014, 93 pp.
Search in Google Scholar Back to article
Fédération internationale du béton (fib): “fib MC(2020) complementary guidance on concrete durability”. fib Bulletin No. 112, technical report, 2024, 87 pp. https://doi.org/10.35789/fib.BULL.0112.Ch04.
Search in Google Scholar Back to article
Köliö A.: “Propagation of Carbonation Induced Reinforcement Corrosion in Existing Concrete Facades Exposed to the Finnish Climate”. No. 1399 (PhD Thesis), Tampere University of Technology, Dept. of Civil Engineering, Tampere, Finland, 2016, 146 pp. https://urn.fi/URN:ISBN:978-952-15-3800-1.
Search in Google Scholar Back to article

Sufficient Sampling to Determine the Cover Depth of Reinforcement and Carbonation Depth for In-use and Reclaimed Concrete Elements

Abstract

Paradigm

My account