Off-Line, On-Line and Route-Based Diagnostics for Maintenance Support: A Case Study of an Industrial Electric Drive
By: Alena Hajkova and Milos Hammer
References
- Jardine, A.K.S., Lin, D. and Banjevic, D. (2006) ‘A review on machinery diagnostics and prognostics implementing condition-based maintenance,’ Mechanical Systems and Signal Processing, 20(7), pp. 1483-1510. https://doi.org/10.1016/j.ymssp.2005.09.012.
- Zonta, T. et al. (2020) ‘Predictive maintenance in the Industry 4.0: A systematic literature review,’ Computers & Industrial Engineering, 150, p. 106889. https://doi.org/10.1016/j.cie.2020.106889.
- Tidriri, K. et al. (2016) ‘Bridging data-driven and model-based approaches for process fault diagnosis nd health monitoring: A review of researches and future challenges,’ Annual Reviews in Control, 42, pp. 63-81. https://doi.org/10.1016/j.arcontrol.2016.09.008.
- Hammer, M. and Nahodil, P. (2020) ‘Electrodiagnostics as a part of multiparametric diagnostics in industrial practice’, DIAGNOSTIKA 11, pp. 11-15.
- Hajkova, A. and Hammer, M. (2024) ‘Application of Modern Approaches to Solving Diagnostic Tasks in Industry,’ 21st International Conference on Mechatronics – Mechatronika (ME), pp. 1-7. https://doi.org/10.1109/me61309.2024.10789654.
- ČSN ISO 13372 (2012) Condition monitoring and diagnostics of machines – Vocabulary. Prague: Czech Office for Standards, Metrology and Testing.
- Lee, J., Bagheri, B. and Kao, H.-A. (2014) ‘A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems, Manufacturing Letters, 3, pp. 18-23. https://doi.org/10.1016/j.mfglet.2014.12.001.
- Lei, Y. et al. (2020) ‘Applications of machine learning to machine fault diagnosis: A review and roadmap,’ Mechanical Systems and Signal Processing, 138, p. 106587. https://doi.org/10.1016/j.ymssp.2019.106587.
- Hoffmann, M.A. and Lasch, R. (2025) ‘Unlocking the Potential of Predictive Maintenance for Intelligent Manufacturing: a Case Study On Potentials, Barriers, and Critical Success Factors,’ Schmalenbach Journal of Business Research, 77(1), pp. 27-55. https://doi.org/10.1007/s41471-024-00204-3.
- Benhanifia, A. et al. (2025) ‘Systematic review of predictive maintenance practices in the manufacturing sector,’ Intelligent Systems With Applications, 26, p. 200501. https://doi.org/10.1016/j.iswa.2025.200501.
- Bousdekis, A. et al. (2015) ‘Review, analysis and synthesis of prognostic-based decision support methods for condition based maintenance,’ Journal of Intelligent Manufacturing, 29(6), pp. 1303-1316. https://doi.org/10.1007/s10845-015-1179-5.
- Vogl, G.W., Weiss, B.A. and Helu, M. (2016) ‘A review of diagnostic and prognostic capabilities and best practices for manufacturing,’ Journal of Intelligent Manufacturing, 30(1), pp. 79-95. https://doi.org/10.1007/s10845-016-1228-8.
- Tomeh, E. (2015) Technical diagnostics: vibration diagnostics of machinery and equipment. Liberec: Technical University of Liberec.
- Randall, R.B. and Antoni, J. (2010) ‘Rolling element bearing diagnostics – A tutorial,’ Mechanical Systems and Signal Processing, 25(2), pp. 485-520. https://doi.org/10.1016/j.ymssp.2010.07.017.
- ISO 13373-1 (2002) Condition monitoring and diagnostics of machines – Vibration condition monitoring – Part 1: General procedures. Geneva: International Organization for Standardization.
- ISO 20816-1 (2016) Mechanical vibration – Measurement and evaluation of machine vibration – Part 1: General guidelines. Geneva: International Organization for Standardization.
- Hashemian, H.M. (2010) ‘Wireless sensors for predictive maintenance of rotating equipment in research reactors,’ Annals of Nuclear Energy, 38(2-3), pp. 665-680. https://doi.org/10.1016/j.anucene.2010.09.012.
- Cachada, A. et al. (2018) ‘Maintenance 4.0: Intelligent and Predictive Maintenance System Architecture,’ 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), pp. 139-146. https://doi.org/10.1109/etfa.2018.8502489.
- Augustyn, D. and Fidali, M. (2023) ‘Identification and evaluation of the characteristics of a selected commercial MEMS based vibration sensor for the machine condition monitoring,’ Diagnostyka, 24(4), pp. 1-8. https://doi.org/10.29354/diag/172581.
Language: English
Page range: 594 - 605
Submitted on: May 1, 2026
Accepted on: Oct 1, 2026
Published online: Nov 17, 2026
Published in print: Dec 1, 2026
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Alena Hajkova, Milos Hammer, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 License.