Off-Line, On-Line and Route-Based Diagnostics for Maintenance Support: A Case Study of an Industrial Electric Drive
Abstract
Technical diagnostics is a key tool for condition-based maintenance of industrial equipment. However, different diagnostic approaches provide different types of information, and their outputs cannot always be directly compared. This article presents a pilot case study comparing off-line, on-line, and hybrid route-based diagnostics applied to an industrial electric drive. The comparison was performed using the VA5 Pro vibration analyzer, the Siemens Simotics Connect 400 monitoring module, and the SKF QuickCollect wireless sensor. The evaluation focuses on the nature of diagnostic outputs, diagnostic depth, data continuity, the ability to track trends, and usability for maintenance support. The results show that the VA5 Pro is suitable for detailed expert analysis of the vibration signal, the Siemens Simotics Connect 400 for long-term trend monitoring, and the SKF QuickCollect for walk-by inspections and repeated condition verification at selected measurement points. The outputs of these systems must be interpreted with regard to sensor location, mounting method, operating condition, and internal signal processing. The study’s contribution lies in defining the complementary roles of the three diagnostic layers within a multi-level strategy for supporting maintenance decision-making.
© 2026 Alena Hajkova, Milos Hammer, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 License.