References
- Zheng, Y., Liu, J. & Huang, Q., 2015. Modeling and control of a 3-link robotic manipulator using PID and sliding mode control. IEEE Transactions on Industrial Electronics, 62(9), pp. 5618-5627.
- Wang, L. & Li, X., 2018. Adaptive and intelligent control for robotic manipulators with unknown dynamics. Journal of Intelligent & Robotic Systems, 91(3-4), pp. 423-436.
- Popescu, D., Ionescu, C. & Georgescu, M., 2018. Dynamic modeling and control of a 3-DOF robotic manipulator. Acta Technica Napocensis, 61(2), pp. 175-182.
- Kumar, A. & Singh, P., 2020. Design, simulation, and control of a 3-DOF planar robotic manipulator using Matlab-Simulink. International Journal of Advanced Robotic Systems, 17(2), pp. 1-12.
- Johnson, M., Smith, R. & Brown, T., 2019. Development of a multi-purpose 3-DOF manipulator system for UAV applications. Journal of Robotics and Automation, 35(4), pp. 245-258.
- Lee, S., Park, J. & Kim, H., 2020. Implementation of a 3-DOF planar robotic arm for precise manipulation tasks. Robotics and Autonomous Systems, 128, 103523.
- Dogan, I. (2023) PID-based Practical Digital Control with Raspberry Pi and Arduino Uno. Limbricht: Elektor International Media.
- Landau, D.I., Lozano, R., Saad, M. and Karimi, A. (2011) Adaptive Control: Algorithms, Analysis and Applications. London: Springer.
- Kumar, A., Kasera, S. and Prasad, L.B. (2019) ‘PD/PID-Fuzzy logic controller based tracking control of 2-link robot manipulator’, i-Manager’s Journal on Instrumentation and Control Engineering, 7(2), pp. 18-25.
- Xiao, B., Yin, S., Kaynak, O. (2016) ‘Tracking control of robotic manipulators with uncertain kinematics and dynamics’, IEEE Transactions on Industrial Electronics, 63(10), pp. 6439-6449. doi: 10.1109/TIE.2016.2569068.
- Tijani, I.B., Akmeliawati, R., Muthalif, A.G.A. and Legowo, A. (2011) ‘Optimization of PID controller for flexible link system using a Pareto-based multi-objective differential (PMODE) evolution’, in Proceedings of the 4th International Conference on Mechatronics (ICOM), Kuala Lumpur, Malaysia, 17-19 May 2011. Piscataway, NJ: IEEE, pp. 1-6. doi: 10.1109/ICOM.2011.5937190.
- Baek, J., & Kwon, W. (2020). Practical Adaptive Sliding-Mode Control Approach for Precise Tracking of Robot Manipulators. Applied Sciences, 10(8), 2909.
- Reyes-Uquillas, D., & Hsiao, T. (2021). Safe and intuitive manual guidance of a robot manipulator using adaptive admittance control towards robot agility. Robotics and Computer-Integrated Manufacturing, 70, 102127.
- Prakash, R., Behera, L., Mohan, S., and Jagannathan, S. “Dual-Loop Optimal Control of a Robot Manipulator and Its Application in Warehouse Automation,” in IEEE Transactions on Automation Science and Engineering, vol. 19, no. 1, pp. 262-279, Jan. 2022, doi: 10.1109/TASE.2020.3027394.
- Azeez, M.I., Abdelhaleem, A.M.M., Elnaggar, S., Moustafa, K.A., & Atia, K.R. (2023). Optimization of PID trajectory tracking controller for a 3-DOF robotic manipulator using enhanced Artificial Bee Colony algorithm. Scientific reports, 13(1), 11164.
- Sagova, Z., et al. (2022). ‘Study of anisotropic friction in gears of mechatronic systems‘, Applied Sciences, 2022, Vol. 12 (21), 11021. EISSN 2076-3417.
- Denavit, J., Hartenberg, R.S. (1955) ‘A kinematic notation for lowerpair mechanisms based on matrices‘, J. Appl. Mech., vol. 22, no. 2, pp. 215-221, Jun. 1955.
- Uicker, J.J., Denavit, J., Hartenberg, R.S. (1964) ‘An iterative method for the displacement analysis of spatial mechanisms‘, J. Appl. Mech., vol. 31, no. 2, pp. 309-314, Jun. 1964.
- Huczala, D., Kot, T., Pfurner, M., Krys, V., Bobovský, Z. (2022) ‘Multirepresentations and multiconstraints approach to the numerical synthesis of serial kinematic structures of manipulators‘, IEEE Access. 2022, vol. 10, pp. 68937-68951.
- Grepl, R. (2007) ‘Kinematika a dynamika mechatronických systémů‘, Vysoké učení technické v Brně, 2007.
- Song, H., Rong, X., Li, Y., (2017). A co-simulation approach based on ADAMS-SIMULINK for development of manipulator position controller. ResearchGate.
- Zajačko, I., Gál, T., Ságová, Y., Mateichyk, V., Wiecek, D. (2018) ‘Application of artificial intelligence principles in mechanical engineering‘, MATEC Web of Conferences 2018.
- Kuether, R.J., Brake, M.R.W., Lamb, D.R. (2020) ‘Integrating control systems with multibody dynamics using ADAMS and MATLAB/Simulink’, Mechanism and Machine Theory, 144, 103121.
- Li, Y., Wang, Y. (2022) ‘Co-simulation of PID control for robotic arm using ADAMS and Simulink’, International Journal of Advanced Robotic Systems, 19(3), pp. 1-12.
- Åström, K.J. and Hägglund, T. (2006) Advanced PID Control. Research Triangle Park: ISA.
- Zhang, B., Li, Y., Chen, H. (2021) ‘Real-time co-simulation platform for vehicle dynamics and control using ADAMS and Simulink’, Simulation Modelling Practice and Theory, 108, 102258.