References
- Zhang, Y., Qi, X., Zhang, L. et al. “Structural characteristics and low-temperature oxidation thermodynamic properties of coal and gangue in the same coal seam.” J Therm Anal Calorim, vol. 149, pp. 7717-7734, 2024.
- Han, Z., Liu, Y., Wang, C. et al. “Experimental study on heat transfer efficiency of pyrotechnics enhanced by gas generator.” J Therm Anal Calorim, vol. 149, pp. 12111-12126, 2024.
- Panda, A., Dyadyura, K., Kokhan, O. “Increase of technological indicators used in the energy industry.” MM Science Journal, pp. 7724-7730, 2024.
- Panda, A., Dyadyura, K., Mokiy, A. “Nonlinear dynamics methods applications to product lifecycle management.” MM Science Journal, pp. 7325-7331, 2024.
- Gaesenngwe, G., Danha, G., Mamvura, T.A., et al. “Coal structure evaluation and morphological properties that affect the coal usage in industries.” Discov Geosci. vol. 2, 85, 2024.
- Wang, J., Liu, X. “Study on heat transfer law of moving temperature variable gas in thermoacoustic plate stack.” Sci Rep, vol. 14, 9486, 2024.
- Dyadyura, K., Oborskyi, G., Prokopovych, I., Khamitov, V., Holubiev, M. “Optimal Management in the Operation of Complex Technical Systems.” Journal of Engineering Sciences, vol. 11, no. 1, B1-B9, 2024.
- Krenický, T., Dyadyura, K., Dmitrishin, D., Grybniak, S., Prokopovich, I. “Application of methods of decentralised systems in management in lean manufacturing.” Management Systems in Production Engineering, vol. 31, no. 4, pp. 427-433, 2023.
- Zhang, X., Shao, Q., Liu, J., et al. “Recent Development of Heat Transfer and Fluid Flow of Supercritical CO2 in Tubes: Mechanisms and Applications.” J Therm Sci, vol. 33, pp. 2274-2298, 2024.
- Golik, V.I., Klyuev, R.V., Martyushev, N.V. et al. “Mechanical Activation of Coal Mining and Enrichment Tailings.” Coke Chem, vol. 67, pp. 407–412, 2024.
- Zi, J., Long, W., Liu, Y., et al. “Numerical simulation of heat transfer performance and convective vortex evolution in a phase change thermal storage device with dispersed heat sources.” Heat Mass Transfer, vol. 60, pp. 1613-1627, 2024.
- Akulich, P.V., Slizhuk, D.S. and Akulich, A.V. “Heat and Mass Transfer in a Vibrofluidized Bed of Vegetable Materials with Radiative-Convective Power Input.” J Eng Phys Thermophy, vol. 97, pp. 1808-1813, 2024.
- Kumar, N., Karmakar, S., Kumar, D. et al “Energy Conversion through Hybrid Renewable Energy System (HRES) from Solid Waste and Its Economic Assessment.” Waste Biomass Valor, vol. 15, pp. 6977-6995, 2024.
- Kim, H.K., Kim, T.Y., Kim, Y.H. et al. “Thermophotovoltaic performance of a porous medium combustor with external heat recovery and multiple injectors.” J Mech Sci Technol, vol. 36, pp. 4315-4325, 2022.
- Brich, M.A., Gorbachev, N.M., Koznacheev, I.A. et al. “Assessment of the Possibility of Microwave Biomass Torre-faction Using the Heat of an Exothermic Decomposition Reaction.” J Eng Phys Thermophy, vol. 97, pp. 1770-1778, 2024.
- Korzyuk, V.I., Rudko, Y.V. “Development of Fushchich’s Mathematical Model of Heat Transfer.” Eng Phys Thermophy, vol. 97, pp. 451-462, 2024.
- Strizhenov, E.M., Chugaev, S.S., Shelyakin, I.D. et al. “Numerical modeling of heat and mass transfer in an adsorbed natural gas storage tank with monolithic active carbon during charging and discharging processes.” Heat Mass Transfer, vol. 60, pp. 1931-1944, 2024.
- Askarova, A.S., Messerle, V.E., Bolegenova, S.A. et al. “Influence of the method of air-fuel mixture supply on the main characteristics of heat and mass transfer processes.” Thermophys. Aeromech, vol. 29, pp. 107-124, 2022.
- Salikhov, V.A., Fedoseev, S.V. “Comprehensive Use of Coal and Coal Waste: Theoretical Aspects.” Coke Chem, vol. 66, pp. 247-252, 2023.
- Dyadyura, K., Prokopovich, I., Khamitov, V., Sikach, T., Vershkov, O. “Application of the Dynamic Programming Method in Process Measurement Problems When Assessing Interoperability.” Lecture Notes in Mechanical Engineering, pp. 699-711, 2025.
- I. Pandová, M. Rimár, A. Panda, et al. “A study of using natural sorbent to reduce iron cations from aqueous solutions.” Int J Environ Res and Pub Health, vol. 17, 2020. https://doi.org/10.3390/ijerph17103686.
- M. Harničárová, J. Valíček, M. Kušnerová, et al. “Study of the influence of the structural grain size on the mechanical properties of technical materials.” Materialwissenschaft und Werkstofftechnik, vol. 5, 2019. https://doi.org/10.1002/mawe.201800177.
- L. Sukhodub, A. Panda, L. Sukhodub, et al. “Hydroxyapatite and zinc oxide based two-layer coating, deposited on Ti6Al4V substrate.” MM Science Journal, pp. 3494-3499, 2019. DOI: 10.17973/MMSJ.2019_12_2019030.
- A. Panda, M. Prislupčák and I. Pandová. “Progressive technology diagnostics and factors affecting machinability.” Applied Mechanics and Materials, vol. 616, pp. 183-190, 2014. DOI: 10.4028/www.scientific.net/AMM.616.183.
- V. Nahornyi, A. Panda, J. Valíček, et al. “Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process.” Materials, vol. 15, 823, 2022. https://doi.org/10.3390/ma15030823.
- A. Panda, V. Nahornyi, J. Valíček, et al. “A novel method for online monitoring of surface quality and predicting tool wear conditions in machining of materials.” Int J Adv Manuf Technol, vol. 123, pp. 3599-3612. https://doi.org/10.1007/s00170-022-10391-0.