References
- A. Malik, F. Nazeer, and Y. Wang, “A prospective way to achieve ballistic impact resistance of lightweight magnesium alloys,” Metals (Basel), vol. 12, no. 2, pp. 1-3, 2022, doi: 10.3390/met12020241.
- E.Ch. Tsirogiannis, E. Daskalakis, M.H. Hassan, A.M. Omar, and P. Bartolo, “Ballistic design and testing of a composite armour reinforced by CNTs suitable for armoured vehicles,” Defence Technology, vol. 32, pp. 173-195, 2024, doi: 10.1016/j.dt.2023.04.013.
- Y. Wang et al., “Ballistic performance of functionally graded B4C/Al composites without abrupt interfaces: Experiments and simulations,” Journal of Materials Research and Technology, vol. 25, pp. 1011-1029, 2023, doi: 10.1016/j.jmrt.2023.06.021.
- I. Shatskyi, M. Makoviichuk, L. Ropyak, and A. Velychkovych, “Analytical model of deformation of a functionally graded ceramic coating under local load,” Ceramics, vol. 6, no. 3, pp. 1879-1893, 2023, doi: 10.3390/ceramics6030115.
- L. Ropyak, T. Shihab, A. Velychkovych, O. Dubei, T. Tutko, and V. Bilinskyi, “Design of a two-layer Al–Al2O3 coating with an oxide layer formed by the plasma electrolytic oxidation of Al for the corrosion and wear protections of steel,” Progress in Physics of Metals, vol. 24, no. 2, pp. 319-365, 2023.
- L. Ropyak, T. Shihab, A. Velychkovych, O. Dubei, T. Tutko, and V. Bilinskyi, “Design of a two-layer Al–Al2O3 coating with an oxide layer formed by the plasma electrolytic oxidation of Al for the corrosion and wear protections of steel,” Progress in Physics of Metals, vol. 24, no. 2, pp. 319-365, 2023.
- V. Lozynskyi et al., “Prediction of phase composition and mechanical properties Fe–Cr–C–B–Ti–Cu hardfacing alloys: Modeling and experimental validations,” Heliyon, vol. 10, no. 3, p. e25199, 2024, doi: 10.1016/j.heliyon.2024.e25199.
- P. Prysyazhnyuk, M. Molenda, T. Romanyshyn, L. Ropyak, L. Romanyshyn, and V. Vytvytskyi, “Development of a hardbanding material for drill pipes based on high-manganese steel reinforced with complex carbides,” Acta Montanistica Slovaca, vol. 27, no. 3, pp. 1-10, 2022.
- P. Prysyazhnyuk, O. Ivanov, O. Matvienkiv, S. Marynenko, O. Korol, and I. Koval, “Impact and abrasion wear resistance of the hardfacings based on high-manganese steel reinforced with multicomponent carbides of Ti–Nb–Mo–VC system,” Procedia Structural Integrity, vol. 36, pp. 130-136, 2022, doi: 10.1016/j.prostr.2022.01.014.
- V. Kulyk et al., “The effect of sintering temperature on the phase composition, microstructure, and mechanical properties of yttria-stabilized zirconia,” Materials (Basel), vol. 15, no. 8, p. 2707, 2022, doi: 10.3390/ma15082707.
- I. Solodkyi et al., “Hierarchical composites of B4C–TiB2 eutectic particles reinforced with Ti,” Ceramics International, vol. 46, no. 18, pp. 28132-28144, 2020, doi: 10.1016/j.ceramint.2020.07.312.
- M. Ayvaz and H. Cetinel, “Ballistic performance of powder metal Al5Cu–B4C composite as monolithic and laminated armor,” Materials Testing, vol. 63, no. 6, pp. 512-518, 2021, doi: 10.1515/mt-2020-0084.
- M. Sözeri, U. Özdemir, T. Fındık, and H. Karakoç, “Comparative study of hardfacing applications on structural steel surfaces to improve ballistic properties,” Materials Today Communications, vol. 38, p. 107733, 2024, doi: 10.1016/j.mtcomm.2023.107733.
- P. Kopas, M. Blatnicky, M. Sága and M.Vasko, “Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy”. Metalurgija, Vol. 56, Issue 1-2, pp. 99-102. Published 2017.
- E. Altuncu and M. Tarım, “Laser cladding of martensitic stainless steels on armor steels,” Emerging Materials Research, vol. 9, no. 1, pp. 1-4, 2020, doi: 10.1680/jemmr.18.00120.
- I. Garašić, M. Jurica, A. Barišić, and D. Iljkić, “Determination of ballistic properties on ARMOX 500T steel welded joint,” Engineering Review, vol. 39, no. 2, pp. 186-196, 2019, doi: 10.30765/er.39.2.8.
- I.P. Shats’kyi, “Closure of a longitudinal crack in a shallow cylindrical shell in bending,” Materials Science, vol. 41, no. 2, pp. 186-191, 2005, doi: 10.1007/s11003-005-0149-z.
- I.P. Shats’kyi and M.V. Makoviichuk, “Contact interaction of crack lips in shallow shells in bending with tension,” Materials Science, vol. 41, no. 4, pp. 486-494, 2005, doi: 10.1007/s11003-006-0006-8.
- K.M. Dovbnya and N.A. Shevtsova, “Studies on the stress state of an orthotropic shell of arbitrary curvature with the through crack under bending loading,” Strength of Materials, vol. 46, no. 3, pp. 345-349, 2014, doi: 10.1007/s11223-014-9556-4.
- I.P. Shats’kyi and M.V. Makoviichuk, “Analysis of the limiting state of cylindrical shells with cracks with regard for the contact of crack lips,” Strength of Materials, vol. 41, no. 5, pp. 560-564, 2009, doi: 10.1007/s11223-009-9166-8.
- I.P. Shatskii and N.V. Makoviichuk, “Effect of closure of collinear cracks on the stress–strain state and the limiting equilibrium of bent shallow shells,” Journal of Applied Mechanics and Technical Physics, vol. 52, no. 3, pp. 464-470, 2011, doi: 10.1134/s0021894411030175.
- M.V. Makovijchuk, T.M. Daliak, and I.P. Shatskij, “Interaction of contact crack with collinear slit under shallow spherical shell bending,” International Applied Mechanics, vol. 60, no. 2, pp. 171-178, 2024, doi: 10.1007/s10778-024-01271-z.
- I.A. Shah et al., “Finite element analysis of the ballistic impact on auxetic sandwich composite human body armor,” Materials (Basel), vol. 15, no. 6, p. 2064, 2022, doi: 10.3390/ma15062064.
- I. Shatskyi and A. Velychkovych, “Analytical model of structural damping in friction module of shell shock absorber connected to spring,” Shock and Vibration, pp. 1-17, 2023, doi: 10.1155/2023/4140583.
- A. Velychkovych, V. Mykhailiuk, and A. Andrusyak, “Numerical model for studying the properties of a new friction damper developed based on the shell with a helical cut,” Applied Mechanics, vol. 6, no. 1, p. 1, 2025, doi: 10.3390/applmech6010001.
- M. Handrik, P. Kopas, V. Baniari, M. Vasko and M. Saga, “Analysis of stress and strain of fatigue specimens localised in the cross-sectional area of the gauge section testing on bi-axial fatigue machine loaded in the high-cycle fatigue region,“ XXI Polish-Slovak scientific conference machine modeling and simulations MMS 2016, Vol. 177, pp. 516-519, DOI10.1016/j.proeng.2017.02.254
- E.R.S. Souza, R.P. Weber, S.N. Monteiro, and S. de S. Oliveira, “Microstructure effect of heat input on ballistic performance of welded high strength armor steel,” Materials (Basel), vol. 14, no. 19, p. 5789, 2021, doi: 10.3390/ma14195789.
- T. Özdemir, “Mechanical & microstructural analysis of armor steel welded joints,” Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, pp. 166-175, 2020, doi: 10.29137/umagd.488104.
- S.N. Kumar, V. Balasubramanian, S. Malarvizhi, A.H. Rahman, and V. Balaguru, “Effect of welding consumables on shielded metal arc welded ultra high hard armour steel joints,” Journal of the Mechanical Behavior of Materials, vol. 31, no. 1, pp. 8-21, 2022, doi: 10.1515/jmbm-2022-0002.
- O. Ivanov, P. Prysyazhnyuk, D. Lutsak, O. Matviienkiv, and V. Aulin, “Improvement of abrasion resistance of production equipment wear parts by hardfacing with flux-cored wires containing boron carbide/metal powder reaction mixtures,” Management Systems in Production Engineering, vol. 28, no. 3, pp. 178-183, 2020, doi: 10.2478/mspe-2020-0026.
- M. Bembenek, P. Prysyazhnyuk, T. Shihab, R. Machnik, O. Ivanov, and L. Ropyak, “Microstructure and wear characterization of the Fe-Mo-B-C-based hardfacing alloys deposited by flux-cored arc welding,” Materials (Basel), vol. 15, no. 14, 2022, doi: 10.3390/ma15145074.
- M. Student, A. Vojtovych, H. Pokhmurska, O. Maruschak, O. Student, and P. Maruschak, “Mechanical characteristics and wear resistance of the cladding layers obtained by melting of cored wires with simultaneous vibration of substrate,” Strojnícky časopis – Journal of Mechanical Engineering, vol. 69, no. 1, pp. 109-122, 2019, doi: 10.2478/scjme-2019-0009.
- S.T.A. Shihab, P. Prysyazhnyuk, R. Andrusyshyn, L. Lutsak, O. Ivanov, and I. Tsap, “Forming the structure and the properties of electric arc coatings based on high manganese steel alloyed with titanium and niobium carbides,” Eastern-European Journal of Enterprise Technologies, vol. 1, no. 12 (103), pp. 38-44, 2020, doi: 10.15587/1729-4061.2020.194164.
- D. Li et al., “Ballistic analysis of high-performance armor steel by numerical simulation,” Scientific Reports, vol. 14, no. 1, 2024, doi: 10.1038/s41598-024-62482-5.
- D. Ma, R. Scazzosi, and A. Manes, “Modeling approaches for ballistic simulations of composite materials: Analytical model vs. finite element method,” Composites Science and Technology, vol. 248, p. 110461, 2024, doi: 10.1016/j.compscitech.2024.110461.
- Y. Striletskyi, L. Ropyak, and A. Bandura, “Method of oscillation excitation for investigation of inconsistency of coating deposition on long parts,” Vibroengineering Procedia, vol. 57, pp. 25-31, 2024, doi: 10.21595/vp.2024.24567.
- A. Bandura and O. Skaskiv, “Functions analytic in a unit ball of bounded L-index in joint variables,” Journal of Mathematical Sciences, vol. 227, no. 1, pp. 1-12, 2017, doi: 10.1007/s10958-017-3570-6.
- A. Bandura and O. Skaskiv, “Entire functions of bounded L-index: Its zeros and behavior of partial logarithmic derivatives,” Journal of Complex Analysis, pp. 1-10, 2017, doi: 10.1155/2017/3253095.
- P. Prysyazhnyuk and D. Di Tommaso, “The thermodynamic and mechanical properties of Earth-abundant metal ternary boride Mo2(Fe,Mn)B2 solid solutions for impact- and wear-resistant alloys,” Materials Advances, vol. 4, no. 17, pp. 3822-3838, 2023, doi: 10.1039/d3ma00313b.
- B. Hallstedt, A.V. Khvan, B.B. Lindahl, M. Selleby, and S. Liu, “PrecHiMn-4–a thermodynamic database for high-Mn steels,” Calphad, vol. 56, pp. 49–57, 2017, doi: 10.1016/j.calphad.2016.11.006.
- V.A. Tatarenko and T.M. Radchenko, “The application of radiation diffuse scattering to the calculation of phase diagrams of F.C.C. substitutional alloys,” Intermetallics, vol. 11, no. 11-12, pp. 1319-1326, 2003, doi: 10.1016/s0966-9795(03)00174-2.
- S.M. Bokoch and V.A. Tatarenko, “A semi-empirical parameterization of interatomic interactions based on the statistical-thermodynamic analysis of the data on radiation diffraction and phase equilibria in F.C.C.–Ni–Fe alloys,” Solid State Phenomena, vol. 138, pp. 303-318, 2008, doi: 10.4028/www.scientific.net/ssp.138.303.