References
- [1] S. Bozkurt, D. Gligor and N. Gligor. “Investigating the impact of psychological customer engagement on customer engagement behaviors: the moderating role of customer commitment.” J Market Anal, 2021.
- [2] M. Ceskovic, et al. “Reasonable Alternative System for Searching UAVs in the Local Area.” Sensors, vol. 22, 3122, 2022.
- [3] J. Macala, I. Pandova and A. Panda. “Clinoptilolite as a mineral usable for cleaning of exhaust gases.” Mineral Resources Management, vol. 25, No. 4, pp. 23-32, 2009.
- [4] A. Panda and V. Nahornyi. Forecasting Catastrophic Events in Technology, Nature and Medicine. Springer Nature Switzerland AG, Cham, 2021, 110 p.
- [5] A. Nekrasov, et al. “Towards the Sea Ice and Wind Measurement by a C-Band Scatterometer at Dual VV/HH Polarization: A Prospective Appraisal.” Remote Sens., vol. 12, 3382, 2020.
- [6] P. Chaithanapat and S. Rakthin. “Customer knowledge management in SMEs: Review and research agenda.” Knowledge and Process Management, vol. 28, pp. 71-89, 2021.
- [7] P. Kurdel, F. Adamcik and J. Labun. “Adequacy of Estimation Model of Asymptotic Learning Operator - Pilot Function.” Nase More, vol. 62, pp. 224-227, 2015.
- [8] J. Valicek, et al. “A new approach for the determination of technological parameters for hydroabrasive cutting of materials.” Materialwissenschaft und Werkstofftechnik, vol. 47, no. 5-6, pp. 462-471, 2016.
- [9] P. Kurdel, F. Adamcik and J. Labun. “Evalution operator pilot skill in learning process”, in: Proc. SGEM, Albena, Bulgaria, 18-24 June 2015, pp. 125-130, 2015.
- [10] A. Garrido-Moreno, N. Lockett and V. Garcia-Morales. “Paving the way for CRM success: The mediating role of knowledge management and organizational commitment.” Information & Management, vol. 51, pp. 1031-1042, 2014.
- [11] J. Labun, et al. “Simple High-Precision 2-Port Vector Analyzer.” IEEE Access, vol. 8, pp. 196609-196617, 2020.
- [12] J. Macala, I. Pandova and A. Panda. “Zeolite as a prospective material for the purification of automobile exhaust gases”. Mineral Resources Management, vol. 33, no. 1, pp. 125-137, 2017.
- [13] A.-M. Aho and L. Uden. “Customer knowledge in value creation for software engineering process”, in: 7th Int. Conf. on Knowledge Management in Organizations: Service and Cloud Computing, 11-13 July 2012, Salamanca, Spain, pp. 141-152, 2013.
- [14] J. Valicek, et al. “Identification of Upper and Lower Level Yield strength in Materials.” Materials, vol. 10, no. 9, 982, 2017.
- [15] A. Attafar, M. Sadidi, H. Attafar, H. and A. Shahin. “The Role of Customer Knowledge Management (CKM) in Improving Organization-Customer Relationship.” Middle-East Journal of Scientific Research, vol. 13, pp. 829-835, 2013.
- [16] I. Pandova, et al. “Use of Sorption of Copper Cations by Clinoptilolite for Wastewater Treatment.” Int J of Envir Research & Public Health, vol. 15, no. 7, pp. 1364-1376, 2018.
- [17] M.M. Migdadi. “Knowledge management, customer relationship management and innovation capabilities.” J of Business & Industrial Marketing, vol. 36, no. 1, pp. 111-124, 2020.
- [18] J. Labun, et al. “Specific Resonant Properties of Non-Symmetrical Microwave Antennas.” Sensors, vol. 21, 939, 2021.
- [19] A. Panda and J. Duplak. “Comparison of Theory and Practice in Analytical Expression of Cutting Tools Durability for Potential Use at Manufacturing of Bearings.” Applied Mechanics and Materials, vol. 616, pp. 300-307, 2014.
- [20] P. Kurdel, M. Ceskovic, N. Gecejova, F. Adamcik and M. Gamcova. “Local Control of Unmanned Air Vehicles in the Mountain Area.” Drones, vol. 6, No. 54, 2022.
- [21] V. Zaloga, K. Dyadyura, I. Rybalka, I. Pandova and T. Zaborowski. “Enhancing efficiency by implementation of integrated management system in order to align organisational culture and daily practice”. Management Systems in Production Engineering, vol. 28, no. 4, pp. 304-311, 2020.
- [22] A. Panda, J. Duplak, J. Jurko and I. Pandova. “Roller Bearings and Analytical Expression of Selected Cutting Tools Durability in Machining Process of Steel 80MoCrV4016.” Applied Mechanics and Materials, vol. 415, pp. 610-613, 2013.
- [23] J. Saoud, et al. “Explicit versus tacit knowledge in duquenne-guigues basis of implications: Preliminary results,” in: Workshop RealDataFCA@ICFCA, 2021. hal-03274757.
- [24] A. Panda, et al. “Development of the method for predicting the resource of mechanical systems.” Int J of Advanced Manuf Technology, vol. 105, no. 1-4, pp. 1563-1571, 2019.
- [25] M. Balara, D. Duplakova and D. Matiskova. “Application of a signal averaging device in robotics.” Measurement, vol. 115, No. 2, pp. 125-132, 2018.
- [26] D. Duplakova, et al. “Determination of optimal production process using scheduling and simulation software.” Int J of Simulation Modelling, vol. 17, no. 4, p. 447, 2018.
- [27] P. Flegner, J. Kacur, M. Durdan and M. Laciak. “Processing a measured vibroacoustic signal for rock type recognition in rotary drilling technology.” Measurement, Journal of the International Measurement Confederation, vol. 134, pp. 451-467, 2019.
- [28] P. Flegner, J. Kacur, M. Durdan and M. Laciak. “Statistical Process Control Charts Applied to Rock Disintegration Quality Improvement.” Applied sciences, vol. 10, no. 23, pp. 1-26, 2020.
- [29] K. Monkova, P. Monka and D. Jakubeczyova. “The research of the high speed steels produced by powder and casting metallurgy from the view of tool cutting life.” Applied Mechanics and Materials, vol. 302, pp. 269-274, 2013.
- [30] Z. Murcinkova, P. Baron, L. Tino, M. Pollak and J. Murcinko. “Research and analysis of stress distribution in multilayers of coated tools.” Int J of Materials Research, vol. 108, no. 6, pp. 495-506, 2017.
- [31] P. Baron, J. Dobransky, M. Kocisko, M. Pollak and T. Cmorej. “The parameter correlation of acoustic emission and high-frequency vibrations in the assessment process of the operating state of the technical system.” Acta Mechanica et Automatica, vol. 10, no. 2, pp. 112-116, 2016.
- [32] I. Mrkvica, M. Janos and P. Sysel. “Cutting efficiency by drilling with tools from different materials.” Advanced Materials Research, vols. 538-541, pp. 1327-1331, 2012.
- [33] T. Zaborowski. Ekowytwarzanie. Gorzow, 2007, 100 p.
- [34] A.S. Chaus, et al. “Complex fine-scale diffusion coating formed at low temperature on high-speed steel substrate.” Applied Surface Science, vol. 437, pp. 257-270, 2018.
- [35] A. Vagaska and M. Gombar. “Mathematical Optimization and Application of Nonlinear Programming.” Studies in Fuzziness and Soft Computing, vol. 404, pp. 461-486, 2021.
- [36] A. Vagaska and M. Gombar. “Comparison of usage of different neural structures to predict AAO layer thickness.” Technical Gazette, vol. 24, no. 2, pp. 333-339. 2021.
- [37] L. Straka and S. Hasova. “Optimization of material removal rate and tool wear rate of Cu electrode in die-sinking EDM of tool steel.” Int J of Advanced Manufacturing Technology, vol. 97, no. 5-8, pp. 2647-2654, 2018.
- [38] L. Straka and S. Hasova. “Prediction of the heat-affected zone of tool steel EN X37CrMoV5-1 after die-sinking electrical discharge machining.” Journal of engineering manufacture, vol. 232, no. 8, pp. 1395-1406, 2018.
- [39] V. Modrak, Z. Soltysova and D. Onofrejova. “Complexity Assessment of Assembly Supply Chains from the Sustainability Viewpoint.” Sustainability, vol. 11, no. 24, pp. 1-15, 2019.
- [40] P. Michalik, et al. “Monitoring surface roughness of thin-walled components from steel C45 machining down and up milling.” Measurement, vol. 58, pp. 416-428, 2014.
- [41] S. Olejarova, J. Dobransky, J. Svetlik and M. Pituk. “Measurements and evaluation of measurements of vibrations in steel milling process.” Measurement: Journal of the International Measurement Confederation, vol. 106, pp. 18-25, 2017.
- [42] M. Rimar, P. Smeringai, M. Fedak and S. Kuna. “Technical and software equipment for the real time positioning control system in mechatronic systems with pneumatic artificial muscles.” Key Engineering Materials, vol. 669, pp. 361-369, 2016.
- [43] T.P. Hovorun, O.V. Pylypenko, M.V. Hovorun and K.O. Dyadyura. “Methods of obtaining and properties of wear-resistant coatings Ti and N and Ti, Al and N.” Journal of Nano- and Electronic Physics, vol. 9, no. 2, 02026, 2017.
- [44] E.C.L. Muniz, G.A. Dandolini, A.A. Biz and A.C. Ribeiro. “Customer knowledge management and smart tourism destinations: a framework for the smart management of the tourist experience–SMARTUR.” Journal of Knowledge Management, 2020.
- [45] A. Panda, S. Olejarova, J. Valicek and M. Harnicarova. “Monitoring of the condition of turning machine bearing housing through vibrations.” Int J of Advanced Manufacturing Technology, vol. 97, no. 1-4, pp. 401-411, 2018.
- [46] I. Benzarti, et al. “Domain engineering for customer experience management.” Innovations Syst Softw Eng, 2022.
- [47] K. Dyadyura, et al. “Influence of roughness of the substrate on the structure and mechanical properties of TiAlN nano-coating condensed by DCMS,” in: Proc of the 2017 IEEE 7th Int Conf on Nanomaterials: Applications and Properties, NAP 2017.
- [48] A. Panda, J. Dobransky, M. Jancik, I. Pandova and M. Kacalova. “Advantages and effectiveness of the powder metallurgy in manufacturing technologies.” Metalurgija, vol. 4, no. 57, pp. 353-356, 2018.
- [49] V. Zaloga, K. Dyadyura, I. Rybalka and I. Pandova. “Implementation of Integrated Management System in Order to Enhance Equipment Efficiency.” Management Systems in Production Engineering, vol. 4, no. 27, pp. 221-226, 2019.
- [50] S.A. Haider and U.N. Kayani. “The impact of customer knowledge management capability on project performance-mediating role of strategic agility.” J of Knowledge Management, 2020.
- [51] A. Panda, J. Jurko and I. Pandova. Monitoring and Evaluation of Production Processes. An Analysis of the Automotive Industry. Springer Int Publ, Switzerland, 2016, 117 p.
- [52] S. Korhonen-Sande and J.B. Sande. “Improving customer knowledge transfer in industrial firms: how does previous work experience influence the effect of reward systems?” Journal of Business & Industrial Marketing, vol. 31, pp. 232-246, 2016.
- [53] A. Khosravi. “Customer knowledge management enhancement in enterprise software development firms: Experts Perspective on a Theoretical Framework.” Journal of Soft Computing and Decision Support Systems, vol. 7, pp. 6-12, 2020.
- [54] A. Garrido-Moreno, N. Lockett and V. Garcia-Morales. “Paving the way for CRM success: The mediating role of knowledge management and organizational commitment.” Information & Management, 2014.
- [55] A. Khosravi and A.R.C. Hussin. “Customer knowledge management antecedent factors: A systematic literature review.” Knowledge & Process Manag, vol. 25, pp. 12-30, 2018.
- [56] A.D. Pogrebjak, et al. “Research of the relief and element composition of the surface coatings based on hydroxyapatite implants from titanium alloys,” in: Proc of 6th Int Conf Nanomaterials: Applications and Properties, NAP 2016, 7757290, 2016.
- [57] L.F. Sukhodub and K. Dyadyura. “Design and fabrication of polymer-ceramic nanocomposites materials for bone tissue engineering.” J of Nano- and Electronic Physics, vol. 10, no. 6, 06003, 2018.
- [58] K.O. Dyadyura and F. Sukhodub. “Magnesium-based matrix composites reinforced with nanoparticles for biomedical applications,” in: Proc of 2017 IEEE 7th Int Conf on Nanomaterials: Applications and Properties, NAP 2017, 04NB14, 2017.
- [59] M. Nilashi, et al. “MCPCM: a DEMATEL-ANP-based multi-criteria decision-making approach to evaluate the critical success factors in construction projects,” Arabian Journal for Science and Engineering, vol. 40, pp. 343-361, 2015.
- [60] R. Trishch, O. Maletska, O. Cherniak, J. Semionova and V. Jancis. “Analysis of the requirements of international and national standards for measure-ment methods and metro-logical equipment.” Innovative Technologies and Scientific Solutions for Industries, vol. 1, no. 11, pp. 156-162, 2020.
- [61] O. Cherniak, R. Trishch, N. Kim and S. Ratajczak. “Quantitative assessment of working conditions in the workplace.” Engineering Management in Production and Services, vol. 2, no. 12, pp. 99-106, 2020.
- [62] C. Lorenzo-Romero, E. Constantinides and L.A. Brünink. “Co-creation: Customer Integration in Social Media Based Product and Service Development.” Procedia - Social and Behavioral Sciences, vol. 148, pp. 383-396, 2014.
- [63] F. Khodakarami and Y.E. Chan. “Exploring the role of customer relationship management (CRM) systems in customer knowledge creation.” Information & Management, vol. 51, pp. 27-42, 2014.
- [64] A. Skotis, I. Katsanakis, A. Macris and M. Sfakianakis. “Creating Knowledge within a C-Business Context: A Customer Knowledge Management View,” in: Collaborative, Trusted and Privacy-Aware e/m-Services. Springer, pp. 264-277, 2013.
- [65] M.A. Mardis, et al. “Assessing alignment between information technology educational opportunities, professional requirements, and industry demands.” Educ Inf Technol, vol. 23, pp. 1547-1584, 2018.
- [66] R. Baidya, et al. “Strategic maintenance technique selection using combined quality function deployment, the analytic hierarchy process and the benefit of doubt approach.” Int J Adv Manuf Technol, vol. 94, pp. 31-44, 2018.
- [67] S. Kim, M. Bowen and X. Wen. “The ultimate co-creation: leveraging customer input in business model innovation.” AMS Rev, vol. 9, pp. 339-356, 2019.
- [68] F. Cheng, et al. “Customer satisfaction-oriented product configuration approach based on online product reviews.” Multimed Tools Appl, 2021.
- [69] S. Vaezitehrani. “Customer Knowledge Management in Global Software Projects.” M.Sc. Thesis, Northhumbria University, Gothenburg, Sweden, 2013.
- [70] A.N. Talet. “KM Process and CRM to manage Customer Knowledge Relationship Management.” International Proceedings of Economics Development & Research, vol. 29, pp. 60-67, 2012.
- [71] A. Khosravi, A.R.C. Hussin and B. Minaei-Bidgoli. “Toward a Customer Knowledge Management Model for Enhancing Enterprise Software Quality.” Advanced Science Letters, vol. 23, pp. 9035-9038, 2017.
- [72] M. Alamgir and M. Quaddus. “Customer Relationship Management Success Model: A Conceptual Framework,” in: Proc 26th Australian and New Zealand Academy of Management Conference (ANZAM), Dec 5-7, 2012, pp. 1-39, 2012.
- [73] Y. Harb and E. Abu-Shanab. “A descriptive framework for the field of knowledge management.” Knowl Inf Syst, vol. 62, pp. 4481-4508, 2020.
- [74] J. Labun, P. Kurdel, M. Ceskovic, A. Nekrasov, M. Gamcova and N. Gecejova. Airport Spatial Usability in Measuring the Spherical Antenna Properties on Small Aircraft.” Sensors, vol. 21, 7920, 2021.