Analytical and finite element analysis of stress concentration factors for polyvinylchloride reinforced with different types of short fibers
References
- Ngo, T.-D., Introduction to composite materials, In Ngo, T.-D. ed. Composite and nanocomposite materials - From knowledge to industrial applications, Intechopen, Canada; 2020. pp. 1–27
- Cyriac, A.J., Metal matrix composites: history, status, factors and future. Faculty of the Graduate College of the Oklahoma State University, USA; 2011
- Mahdi, E., Dean, A., The effect of filler content on the tensile behavior of polypropylene/Cotton Fiber and poly (vinyl chloride)/cotton fiber composites, Materials, 2020, 13: 753. 10.3390/ma13030753
- Kim, S.J., Moon, J.B., Kim, G.H., Ha, C.S., Mechanical properties of polypropylene/natural fiber composites: Comparison of wood fiber and cotton fiber, Polym. Test., 2008, 27: 801–806. 10.1016/j.polymertesting.2008.06.002
- Zhang, X., Li, K.Z., Li, H.J., Fu, Y.W., Fei, J., Tribological and mechanical properties of glass fiber reinforced paper-based composite friction material, Tribol. Int., 2014, 69: 156–167. 10.1016/j.triboint.2013.08.003
- Detomi, A.C., dos Santos, R.M., Ribeiro Filho, S.L., Martuscelli, C.C., Panzera, T.H., Scarpa, F., Statistical effects of using ceramic particles in glass fibre reinforced composites, Mater. Des., 2014, 55: 463–470. 10.1016/j.matdes.2013.09.026
- Park, S.B., Lee, J.S., Kim, J.W., Effects of short glass fibers on the mechanical properties of glass fiber fabric/PVC composites, Mater. Res. Express, 2017, 4: 035301. 10.1088/2053-1591/aa6142
- Peterson, R.E., Pilkey, W.D., Peterson’s stress concentration factors. 2nd edn. John Wiley & Sons, INC. A Wiley-lnterscience Publication, New York, USA; 1997
- Tan, S.C., Finite-width correction factors for anisotropic plate containing a central opening, J. Compos. Mater., 1988, 22: 1080–1097
- Jones, R.M., Mechanics of composite materials. 2nd edn. Taylor & Francis, Inc., USA; 1999
- Wu, H.C., Mu, B., On stress concentrations for isotropic/orthotropic plates and cylinders with a circular hole, Compos., Part B, 2003, 34(2): 127–134
- Jain, N.K., Mittal, N.D., Finite element analysis for stress concentration and deflection in isotropic, orthotropic and laminated composite plates with central circular hole under transverse static loading, Mater. Sci. Eng., 2008, 498: 115–124. 10.1016/j.msea.2008.04.078
- Darwish, F., Tashtoush, G., Gharaibeh, M., Stress concentration analysis for countersunk rivet holes in orthotropic plates. Eur. J. Mech., 2013, 37: 69–78. 10.1016/j.euromechsol.2012.04.006
- Pavan Kishore, M.L., Chandrashekhar, A., Avinash, M., Das, R., Stress analysis of rectangular and square plates with various cutout, Vibroeng Proc., 2019 March, 22: 165–169. 10.21595/vp.2018.20311
- Ankur, J., Stress concentration factor converts into stress intensity factor using ANSYS, IJSER, 2016, 7: 1662–1667
- Pawar, P., Ballav, R.A., Kumar, A., Finite element method analysis of rectangular Plate with circular hole using ansys, Int. J. Chem. Sci., 2016, 14; 2787–2798. ISSN 0972-768X
- Kadam, M., Kulkarni, V., Effect of Geometry of Opening on the Stress Concentration Factor for a Plate, Design, Manufacturing and Mechatronics, January 2014, ICDMM2014
- Toubal, L., Karama, M., Lorrain, B., Stress concentration in a circular hole in composite plate, Compos. Struct. 2004, 68: 31–36. 10.1016/j.compstruct.2004.02.01
- Shaik, A.S., Mirzana, I.M., Stress concentration of rectangular plate with a hole made with composite material using finite element analysis, IOSR-JMCE, 2016, 13(4): 1–5. 10.9790/1684-13040740105
- Mohamed Makki, M., Chokri, B., Experimental, analytical, and finite element study of stress concentration factors for composite materials, J. Compos. Mater., 2016, 13: 1–12. 10.1177/0021998316659915
- Zitoune, R., Crouzeix, L., Collombet, F., Tamine, T., Grunevald, Y.H., Behaviour of composite plates with drilled and moulded hole under tensile load, Compos. Struct., 2011, 93: 2384–2391. 10.1016/j.compstruct.2011.03.027
- Mekalke, G.C., Kavade, M.V., Deshpande, S.S., Analysis of a plate with a circular hole by FEM, IOSR-JMCE, 2013 Jan: 25–30
- Parle, D., Patil, A., Ambulgekar, A., Evaluation of stress concentration factor using ANSYS. Infosys Technologies Ltd., Pune, India; 2011 Oct
- Suppliers data sheet websites (https://www.izocam.com.tr/en/products)
- ASTM D 638, Standard test method for “Tensile properties of polymer matrix composite materials”, American society for Testing and Materials (ASTM) International, West Conshohocken, PA; 2000, www.astm.org
- Mohamed, Y.S., Wan, B., Chang, L., Abdelbary, A., Experimental and numerical study of the effects of fiber orientation on stress concentration of CFRE, J. Reinf. Plast. Compos., 2024, 44: 1205–1215. 10.1177/07316844241238834
- Kumar, S.A., Rajesh, R., Pugazhendhi, S., A review of stress concentration studies on fibre composite panels with holes/cutouts, IJMSA, 2020, 234(11): 1461–1472. 10.1177/1464420720944571
- Misbah, M.N., Ariesta, R.C., Yulianto, T., Setyawan, D., Putra, W.H.A., Study numerical and experimental of stress concentration factor on isotropic plate with hole, Mater. Phys. Mech., 2022, 48: 397–406. 10.18149/MPM.4832022_10
Language: English
Page range: 30 - 49
Submitted on: Dec 11, 2024
Accepted on: Jan 15, 2026
Published on: Mar 17, 2026
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Yasser S. Mohamed, Hesham A. Ghonem, Wael A. Crosby, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.