References
- Gądek, T., Majewski, M., Research on the effect of temperature increase during flow forming without cooling on 6060 aluminum alloy, Mater. Sci. Pol., 2023, 41: 74–84. 10.2478/msp-2023-0033
- De Cooman, B.C., Estrin, Y., Kim, S.K., Twinning-induced plasticity (TWIP) steels, Acta Mater., 2018, 142: 283–362. 10.1016/j.actamat.2017.06.046
- Lisiecka-Graca, P., Lisiecki, Ł., Zyguła, K., Wojtaszek, M., Evaluation of cracking risk of 80MnSi8-6 nanobainitic steel during hot forging in the range of lower temperature limits, Mater. Sci. Pol., 2024, 42: 171–185. 10.2478/msp-2024-0011
- Kannan, P.R., Thanigaivelan, R., Thiraviam, R., Pradeep Kumar, K., Performance studies on hybrid nano-metal matrix composites for wear and surface quality, Mater. Sci. Pol., 2023, 41: 288–300. 10.2478/msp-2023-0020
- Dai, Y., Yan, L., Hao, J., Review on micro-alloying and preparation method of 7xxx series aluminum alloys: Progresses and prospects, Mater., 2022, 15(3): 1216. 10.3390/ma15031216
- Lachowicz, M.M., Metallurgical aspects of the corrosion resistance of 7000 series aluminum alloys – a review, Mater. Sci. Pol., 2023, 41: 159–180. 10.2478/msp-2023-0041
- Chang, L., Yuan, S., Huang, X., Cai, Z., Determination of Johnson-Cook damage model for 7xxx laminated aluminum alloy and simulation application, Mater. Today Commun., 2023, 34: 105224. 10.1016/j.mtcomm.2022.105224
- Zwolak, M., Sliwa, R., Analysis of the influence of dies geometry on the process extrusion force and properties of the extrudate obtained in the process of cold extrusion of 7075 aluminum alloy by the KOBO method, Mater. Sci. Pol., 2024, 42: 92–106. 10.2478/msp-2024-0008
- Zhou, B., Liu, B., Zhang, S., The advancement of 7xxx series aluminum alloys for aircraft structures: A review, Metals (Basel), 2021, 11: 718. 10.3390/met11050718
- Omer, K., Abolhasani, A., Kim, S., Nikdejad, T., Butcher, C., Wells, M., et al., Process parameters for hot stamping of AA7075 and D-7xxx to achieve high performance aged products, J. Mater. Process. Technol., 2018, 257: 170–179. 10.1016/j.jmatprotec.2018.02.039
- Krajewski, P., Stamping of age-hardenable aluminum alloy sheets, United States Pat. US 2012/0186706 A1, Vol. 002, 2012, p. 354. 10.1037/t24245-000
- Gronostajski, Z., Jaśkiewicz, K., Kaczyński, P., Skwarski, M., Polak, S., Krawczyk, J., et al., W-Temper forming of B-pillar from 7075 aluminum alloy, CIRP Ann., 2022, 71: 221–224. 10.1016/j.cirp.2022.03.019
- Kaczyński, P., Skwarski, M., Jaśkiewicz, K., Development of the technology for press-forming of energy-absorbing elements made of 7075 aluminum alloy, J. Manuf. Process., 2020, 50: 676–683. 10.1016/j.jmapro.2020.01.023
- Liu, Q., Chen, S., Gu, R., Wang, W., Wei, X., Effect of heat treatment conditions on mechanical properties and precipitates in sheet metal hot stamping of 7075 aluminum alloy, J. Mater. Eng. Perform., 2018, 27: 4423–4436. 10.1007/s11665-018-3588-z
- Chen, J., Zhen, L., Yang, S., Shao, W., Dai, S., Investigation of precipitation behavior and related hardening in AA 7055 aluminum alloy, Mater. Sci. Eng. A., 2009, 500: 34–42. 10.1016/j.msea.2008.09.065
- Zhen, L., Chen, J., Yang, S., Shao, W., Dai, S., Development of microstructures and texture during cold rolling in AA 7055 aluminum alloy, Mater. Sci. Eng. A., 2009, 504: 55–63. 10.1016/j.msea.2008.10.055
- Argandoña, E.S., Galdos, L., Ortubay, R., Mendiguren, J., Agirretxe, X., Room temperature forming of AA7075 aluminum alloys: W-temper process, Key Eng. Mater., 2015, 651–653: 199–204. 10.4028/www.scientific.net/KEM.651-653.199
- Sajadifar, S.V., Suckow, T., Chandra, C.K., Heider, B., Heidarzadeh, A., Zavašnik, J., et al., Assessment of the impact of process parameters on the final material properties in forming of EN AW 7075 employing a simulated forming process, J. Manuf. Process., 2023, 86: 336–353. 10.1016/j.jmapro.2022.12.056
- Schuster, P.A., Österreicher, J.A., Kirov, G., Sommitsch, C., Kessler, O., Mukeli, E., Characterisation and comparison of process Chains for producing automotive structural parts from 7xxx Aluminium Sheets, Metals (Basel), 2019, 9: 1–15. 10.3390/met9030305
- Choi, Y., Lee, J., Panicker, S.S., Jin, H.K., Panda, S.K., Lee, M.G., Mechanical properties, springback, and formability of W-temper and peak aged 7075 aluminum alloy sheets: Experiments and modeling, Int. J. Mech. Sci., 2020, 170: 69–84. 10.1016/j.ijmecsci.2019.105344
- Chen, J.Z., Zhen, L., Fan, L.W., Yang, S.J., Dai, S.L., Shao, W.Z., Portevin-Le Chatelier effect in Al-Zn-Mg-Cu-Zr aluminum alloy, Trans. Nonferrous Met. Soc. China (Engl. Ed.), 2009, 19: 1071–1075. 10.1016/S1003-6326(08)60408-2
- Lee, J., Bong, H.J., Kim, D., Lee, Y.S., Choi, Y., Lee, M.G., Application of combined W-temper and cold forming technology to high-strength aluminum alloy automotive parts, JOM, 2019, 71: 4393–4404. 10.1007/s11837-019-03779-z
- Hua, L., Liu, S., Wei, P., Hu, Z., Ye, X., Deformation behavior, paint-bake response and microstructure evolution of pre-hardened 7075 aluminum alloy, Mater. Sci. Eng. A., 2025, 945: 148967. 10.1016/j.msea.2025.148967
- Mackenzie, J., Nwekirk, S., Quench factor analysis for heat treatment optimization of 7XXX aluminum alloys, Proceedings of the 8th Semin, IFHTSE, Dubrovnik, Croat, 2001, p. 119
- Min, J., Xie, F., Liu, Y., Hou, Z., Lu, J., Lin, J., Experimental study on cold forming process of 7075 aluminum alloy in W temper, CIRP J. Manuf. Sci. Technol., 2022, 37: 11–18. 10.1016/j.cirpj.2022.01.001
- Nasim, W., Kulkarni, S.S., Soulami, A., Efe, M., Rohatgi, A., Room temperature stamping of high-strength aluminum for lightweight structural automotive components, J. Mater. Eng. Perform., 2024, 33: 11876–11887. 10.1007/s11665-023-08810-8
- Choi, Y., Ha, J., Lee, M.G., Korkolis, Y.P., Effect of plastic anisotropy and Portevin-Le Chatelier bands on hole-expansion in AA7075 sheets in -T6 and -W tempers, J. Mater. Process. Technol., 2021, 296: 117211. 10.1016/j.jmatprotec.2021.117211
- Anbalagan, K., Duraisamy, V., Loganathan, R.V., Sam, P.P., Influence of cerium oxide nanoparticles on the tribological behavior of AA8090 aluminum alloy composites for aero, military, and marine industrial applications, Mater. Sci., 2024, 42: 101–112. 10.2478/msp-2024-0048