References
- WorldAutoSteel, Life Cycle Assessment Case Study SuperLIGHT-Car (SLC), (2011) 4. http://www.worldautosteel.org/download_files/CaseStudies/2LCACaseStudy_SuperLightCar_20110323.pdf
- Gądek, T., Majewski, M., Research on the effect of temperature increase during flow forming without cooling on 6060 aluminum alloy, Mater. Sci. Pol., 2023, 41: 74–84. 10.2478/msp-2023-0033
- Lachowicz, M.M., Metallurgical aspects of the corrosion resistance of 7000 series aluminum alloys – a review, Mater. Sci. Pol., 2023, 41: 159–180. 10.2478/msp-2023-0041
- Zwolak, M., Sliwa, R., Analysis of the influence of dies geometry on the process extrusion force and properties of the extrudate obtained in the process of cold extrusion of 7075 aluminum alloy by the KOBO method, Mater. Sci. Pol., 2024, 42: 92–106. 10.2478/msp-2024-0008
- Zhou, B., Liu, B., Zhang, S., The advancement of 7xxx series aluminum alloys for aircraft structures: A review, Metals (Basel), 2021, 11: 13–20. 10.3390/met11050718
- Hirsch, J., Aluminium in innovative light-weight car design, Mater. Trans., 2011, 52: 818–824. 10.2320/matertrans.L-MZ201132
- Anbalagan, K., Duraisamy, V., Loganathan, R.V., Sam, P.P., Influence of cerium oxide nanoparticles on the tribological behavior of AA8090 aluminum alloy composites for aero, military, and marine industrial applications, Mater. Sci. Pol., 2024, 42: 101–112. 10.2478/msp-2024-0048
- Scharifi, E., Yardley, V.A., Weidig, U., Szegda, D., Lin, J., Steinhoff, K., Hot sheet metal forming strategies for high-strength aluminum alloys: a review – fundamentals and applications, Adv. Eng. Mater., 2023, 25: 8–10. 10.1002/adem.202300141
- Noder, J., George, R., Butcher, C., Worswick, M.J., Friction characterization and application to warm forming of a high strength 7000-series aluminum sheet, J. Mater. Process. Technol., 2021, 293: 117066. 10.1016/j.jmatprotec.2021.117066
- Kumar, M., Sotirov, N., Chimani, C.M., Investigations on warm forming of AW-7020-T6 alloy sheet, J. Mater. Process. Technol., 2014, 214: 1769–1776. 10.1016/j.jmatprotec.2014.03.024
- Wang, H., Luo, Y.B., Friedman, P., Chen, M.H., Gao, L., Warm forming behavior of high strength aluminum alloy AA7075, Trans. Nonferrous Met. Soc. China (Engl. Ed.), 2012, 22: 1–7. 10.1016/S1003-6326(11)61131-X
- Lee, M.Y., Sohn, S.M., Kang, C.Y., Suh, D.W., Lee, S., Effects of pre-treatment conditions on warm hydroformability of 7075 aluminum tubes, J. Mater. Process. Technol., 2004, 155: 1337–1343. 10.1016/j.jmatprotec.2004.04.200
- Huo, W., Hou, L., Zhang, Y., Zhang, J., Warm formability and post-forming microstructure/property of high-strength AA 7075-T6 Al alloy, Mater. Sci. Eng. A., 2016, 675: 44–54. 10.1016/j.msea.2016.08.054
- Polak, S., Kaczyński, P., Gronostajski, Z., Jaskiewicz, K., Krawczyk, J., Skwarski, M., et al., Warm forming of 7075 aluminum alloys, Procedia Eng., 2017, 207: 2399–2404. 10.1016/j.proeng.2017.10.1015
- Zhang, W.P., Li, H.H., Hu, Z.L., Hua, L., Investigation on the deformation behavior and post-formed microstructure/properties of AA7075-T6 alloy under pre-hardened hot forming process, Mater. Sci. Eng. A., 2020, 792: 139749. 10.1016/j.msea.2020.139749
- Behrens, B.A., Nürnberger, F., Bonk, C., Hübner, S., Behrens, S., Vogt, H., Influences on the formability and mechanical properties of 7000-aluminum alloys in hot and warm forming, J. Phys. Conf. Ser., 2017, 896: 5–8. 10.1088/1742-6596/896/1/012004
- Jaśkiewicz, K., Skwarski, M., Kaczyński, P., Gronostajski, Z., Polak, S., Trzpis, P., Warm sheet metal forming of energy-absorbing elements made 7075 aluminum alloy in the hardened state T6, Int. J. Adv. Manuf. Technol., 2022, 119: 3157–3179. 10.1007/s00170-021-08549-3
- Gronostajski, Z., Polak, S., Jaśkiewicz, K., Kaczyńskia, P., Skwarski, M., Krawczyk, J., et al., Properties of B-pillar made of aluminium 7075 in warm forming process, Procedia Manuf., 2019, 27: 98–103. 10.1016/j.promfg.2018.12.050
- Sun, L., Zhang, Z., Song, Z., Ren, M., Jia, H., Feasibility study on contact heating warm forming of 7075 ‑ T6 aluminum alloy, Arch. Civ. Mech. Eng., 2023, 23: 1–8. 10.1007/s43452-023-00749-w
- Ma, H., Sun, L., Zhang, Z., Jia, H., Ren, M., Study on process parameters optimization of 7075-T6 aluminum alloy under contact heating, Arch. Civ. Mech. Eng., 2024, 24: 1–10. 10.1007/s43452-024-00913-w
- Deng, L., Wang, X., Jin, J., Xia, L., Springback and hardness of aluminum alloy sheet part manufactured by warm forming process using non-isothermal dies, Procedia Eng., 2017, 207: 2388–2393. 10.1016/j.proeng.2017.10.1013
- Wang, N., Ilinich, A., Chen, M., Luckey, G., D’Amours, G., A comparison study on forming limit prediction methods for hot stamping of 7075 aluminum sheet, Int. J. Mech. Sci., 2019, 151: 444–460. 10.1016/j.ijmecsci.2018.12.002
DOI: https://doi.org/10.2478/msp-2025-0031 | Journal eISSN: 2083-134X (formerly 2083-124X) | Journal ISSN: 2083-1331
Language: English
Page range: 64 - 84
Submitted on: Sep 4, 2025
Accepted on: Sep 4, 2025
Published on: Sep 20, 2025
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2025 Mateusz Skwarski, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.