References
- Schur, E.A., Fedin, V.M., Zhigalkin, I.G., Bortz, A.I., A new method of heat treatment of rails using double-sided cooling, Materials of the Jubilee Railway Commission of OJSC Kuznetsk Metallurgical Plant, Russia, 2002, pp. 149–155, ISBN 5-84-41-0054-9
-
[2]
Żak, S., Ropka, T., Comparison of the quality of rail steel from the 19th century converter processes and the modern oxygen-converter process. Mater. Sci. Poland, 2024, 42(3): 39–55. 10.2478/msp-2024-0033
Żak S. Ropka T. Comparison of the quality of rail steel from the 19th century converter processes and the modern oxygen-converter process Mater. Sci. Poland 2024 42 3 39 55 10.2478/msp-2024-0033
- Pointner, P., Rail material changes in high-performance transport, DVM-Tag, 2003
- EN 13674-1:2011 + A1:2017, Railway - Track - Rail, Part 1: Vignole railway rails of mass 46 kg/m and above, CEN-CENELEC Management Centre, Brussels, 2017
- Guericke, W., Heller, W., Kasprowicz, J., Weiße, M., Verbesserte bruchsicherheit von schienen durch optimiertes rollenrichten. ETR Eisenbahntech Rundsch, 2001, 50(9): 541–551, ISBN 0013-2845
-
[6]
Żak, S., Woźniak, D., Controlling the state of residual stresses in railway rails by modifying pass design of straightening rollers. Arch. Metall. Mater., 2023, 68(t.1): 57–70. 10.24425/amm.2023.141473
Żak S. Woźniak D. Controlling the state of residual stresses in railway rails by modifying pass design of straightening rollers Arch. Metall. Mater. 2023 68 t.1) 57 70 10.24425/amm.2023.141473
-
[7]
Żak, S., Woźniak, D., The influence of changes in roll pass design on the state of residual stresses in railway rails – summary, Arch. Metall. Mater., 2023, 68(t.2): 439–446. 10.24425/amm.2023.142420
Żak S. Woźniak D. The influence of changes in roll pass design on the state of residual stresses in railway rails – summary Arch. Metall. Mater. 2023 68 t.2 439 446 10.24425/amm.2023.142420
- Jabłońska, M, Lewandowski, F, Chmiela, B, Gronostajski, Z., Advanced heat treatment of pearlitic rail steel, Materials, 2023 Sep, 16(19):6430. 10.3390/ma16196430. PMID: 37834570; PMCID: PMC10573705
-
[9]
Babachenko, A, Podolskyi, R, Kononenko, G.A., Safronova, E., Investigation of the influence of heat treatment modes of experimental steels for new generation railway rails on mechanical properties, Fundam. Appl. Probl. Ferrous Metall, 2020, 34: 247–255. 10.52150/2522-9117-2020-34-247-255
Babachenko A Podolskyi R Kononenko G.A. Safronova E. Investigation of the influence of heat treatment modes of experimental steels for new generation railway rails on mechanical properties Fundam. Appl. Probl. Ferrous Metall 2020 34 247 255 10.52150/2522-9117-2020-34-247-255
-
[10]
Sahay, S.S., Mohapatra, G., Totten, G.E., Overview of pearlitic rail steels: accelerated cooling, quenching, microstructure and mechanical properties. J. ASTM Int., 2009, 6: 1–26. 10.1520/JAI102021
Sahay S.S. Mohapatra G. Totten G.E. Overview of pearlitic rail steels: accelerated cooling, quenching, microstructure and mechanical properties J. ASTM Int. 2009 6 1 26 10.1520/JAI102021
- Snitko, I.P., Galyamov, A.K., Current status of rail production abroad, Materials of the Jubilee Railway Commission, Novokuznetsk, 2002, pp. 10–30, ISBN 5-84-41-0054-9
- Sarychev, V.D., Grachev, V.V., Petrov, V.I., Gromove, V.E., Utwardzenie powierzchni szyn i ich trwałość eksploatacyjna, Materiały Jubileuszowej Komisji Kolejowej, Nowokuźnieck, 2002, pp. 140-149, ISBN 5-84-41-0054-9
- Herian, J., Aniołek, K., Selected aspects of shaping of a rail steel microstructure and its influence on a resistance to abrasive wear, Hutnik– Wiad. Hut., 2007, 74(5): 251–255, UKD 625.151.2:669-42.620.18 669.15-194:53:539.53:539.62
-
[14]
Binder, M., Mezhuyew, V., Tschandl, M., Predictive maintenance for railway domain: a systematic literature review. IEEE Eng. Manag. Rev., June 2023, 51(2): 1–18. 10.1109/EMR.2023.3262282
Binder M. Mezhuyew V. Tschandl M. Predictive maintenance for railway domain: a systematic literature review IEEE Eng. Manag. Rev. June 2023 51 2 1 18 10.1109/EMR.2023.3262282
-
[15]
Modi, O., Desmukh, N., Mondal, D., Jha, A., Yegneswaran, A., Khaira, H., Effect of interlamellar spacing on the mechanical properties of 0.65% C steel, Mater. Charact. 2001;46: 347–352. 10.1016/S1044-5803(00)00113-3
Modi O. Desmukh N. Mondal D. Jha A. Yegneswaran A. Khaira H. Effect of interlamellar spacing on the mechanical properties of 0.65% C steel Mater. Charact. 2001 46 347 352 10.1016/S1044-5803(00)00113-3
-
[16]
Li, X.C., Ding, H.H., Wang, W.J., Guo, J., Liu, Q.Y., Zhou, Z.R., Investigation on the relationship between microstructure and wear characteristic of rail materials, Tribol. Int., Nov 2021, 163: 107152, pp. 1–15. 10.1016/j.triboint.2021.107152
Li X.C. Ding H.H. Wang W.J. Guo J. Liu Q.Y. Zhou Z.R. Investigation on the relationship between microstructure and wear characteristic of rail materials Tribol. Int. Nov 2021 163 107152 pp. 1–15 10.1016/j.triboint.2021.107152
-
[17]
Kuziak, R., Pidvystsk’yy, V., Radwański, K., Mazur, A., Zygmunt, T., Pietrzyk, M., et al., Optimalization of the heat treatment process to obtain the required distribution of mechanical properties in the rail head of pearlitic rails, J. Met. Mater., 2019, 71(1): 3–9. 10.32730/imz.2657-747.19.1.1
Kuziak R. Pidvystsk’yy V. Radwański K. Mazur A. Zygmunt T. Pietrzyk M. Optimalization of the heat treatment process to obtain the required distribution of mechanical properties in the rail head of pearlitic rails J. Met. Mater. 2019 71 1 3 9 10.32730/imz.2657-747.19.1.1
-
[18]
Christodoulou, P.T., Kermanidis, A.T., Haidemenopoulos, G.N., Fatigue and fracture behaviour of pearlitic Grade 900A steel used in railway applications, Theor. Appl. Fract. Mech., 2016, 83: 51–59. 10.1016/j.tafmec.2015.12.017
Christodoulou P.T. Kermanidis A.T. Haidemenopoulos G.N. Fatigue and fracture behaviour of pearlitic Grade 900A steel used in railway applications Theor. Appl. Fract. Mech. 2016 83 51 59 10.1016/j.tafmec.2015.12.017
- German, J., Wprowadzenie do mechaniki pękania, Wydawnictwo Politechniki Krakowskiej, Kraków, 2018, ISBN: 978-83-65991-23-2
- Okocha, S., Yu, F., Jar, P.Y., Hendry, M., Relationship between fracture toughness and average grain sizes of high strength rail steels, November 202, Conference: Canadian & Cold Regions Rail Research Conference At: Edmonton, Canada
-
[21]
Maya-Johnson, S., Ramirez, A.J., Toro, A., Fatigue crack growth rate of two pearlitic rail steels, Eng. Fract. Mech., 2015, 138: 63–72, ISSN 0013-7944. 10.1016/j.engfracmech.2015.03.023
Maya-Johnson S. Ramirez A.J. Toro A. Fatigue crack growth rate of two pearlitic rail steels Eng. Fract. Mech. 2015 138 63 72 ISSN 0013-7944 10.1016/j.engfracmech.2015.03.023
- Żak, S., Bartyzel, J., Kasprowicz, J., Railway rails for heavy-duty tracks manufactured at Huta Katowice S.A, Hutnik– Wiadomości Hutnicze, 2001, 68(11): 404–408, UKD 625.143.2:620.17:669-42(438)
- Girsch, G., Jörg, A., Schoech, W., Managing rail life to match performance and cut costs, Railw. Gaz. Int. Technol. Track, 2010, 166(8): 45–48
- Pointner, P., Joerg, A., Jaiswal, J., Definitive guidelines on the use of different rail grades, Integrated Project (IP) Project No. TIP5-CT-2006-03141, Thematic Priority 6, Innotrack, London, UK, 2009
- Tomićić-Torlaković, M., Guideline for the rail grade selection, Metalurgija, 2014, 53(4): 717–720, ISSN 0543-5846, UDC – UDK 625.143:672.083.1:620.178.1 = 111
- PN-EN ISO 6506-1:2014-12, Metals - Brinell hardness measurement - Part 1: Test method, ISO Copyright Office, Switzerland, 2014
- ISO 12108 Edition 3, Metallic materials — Fatigue testing — Fatigue crack growth method, ISO Copyright Office, Switzerland, 2018
- ASTM E399, Standard test method for linear-elastic plane-strain Fracture toughness of metallic materials, ASTM International, United States, 2023
- ISO 1099, Metallic materials — Fatigue testing — Axial force-controlled method, ISO Copyright Office, Switzerland, 2017
- Kuziak, R., Molenda, R., Pietryka, J., Zygmunt, T., Potwora, A., A new method of head hardening of rail profiles, Hutnik– Wiad. Hut., 2003, 70(2): 53–59, UKD 669-42.620.18.669.04:669.1.017.3-5:669.11
- Żak, S., Junak, G., Woźniak, D., Żak, A., Chmiela, B., Jabłońska, M. B., Evaluating the stress intensity factor for R350HT rail steel in relation to microstructure parameters, Adv. Sci. Technol. Res. J., 2025, 19(4): 349–364. 10.12913/22998624/200404, ISSN 2299-8624