Influence of heat treatment conditions of Hardox 500 steel on its resistance to abrasive wear
References
- Białobrzeska, B., Jasiński, R., Konat, Ł., Szczepański, Ł., Analysis of the properties of Hardox extreme steel and possibilities of its applications in machinery, Metals (Basel), 2021, 11: 162. 10.3390/met11010162
- Konat, Ł., Jasiński, R., Białobrzeska, B., Szczepański, Ł., Analysis of the static and dynamic properties of wear-resistant Hardox 600 steel in the context of its application in working elements, Mater. Sci.-Poland, 2021, 39: 86–102. 10.2478/msp-2021-0007
- Pawlak, K., Białobrzeska, B., Konat, Ł., The influence of austenitizing temperature on prior austenite grain size and resistance to abrasion wear of selected low-alloy boron steel, Arch. Civ. Mech. Eng., 2016, 16: 913–926. 10.1016/j.acme.2016.07.003
- Llewellyn, D.T., Cook, W.T., Metallurgy of boron-treated low-alloy steels, Met. Technol., 1974, 1: 517–529. 10.1179/030716974803287924
- Simcoe, C.R., Elsea, A.R., Manning, G.K., Further work on the boron-hardenability mechanism, JOM, 1956, 8: 984–988. 10.1007/BF03377806
- Rosenberg, S.J., Temper brittleness of boron-treated steels, J. Res. Natl Bur. Stand., 1957, 58: 175–187. 10.6028/jres.058.024
- Kawamura, K., Otsubo, T., Relationship between the hardenability of steel and the “effective boron” in steel, Tetsu-to-Hagané, 1976, 16: 545–550
- Sharma, M., Ortlepp, I., Bleck, W., Boron in heat-treatable steels: a review, Steel Res. Int., 2019, 90: 1900133. 10.1002/SRIN.201900133
- Konat, Ł., Napiórkowski, J., The effect of the method and parameters of the heat treatment on abrasive wear resistance of 38GSA steel, Q. Tribologia, 2019, 2: 61–69. 10.5604/01.3001.0013.5435
- https://www.ssab.com/en/brands-and-products/hardox/product-program, 2024
- Rudnik, S., Metaloznawstwo, vol. II, Warszawa, Państwowe Wydawnictwo Naukowe PWN, 1983
- Luo, K., Bai, B., Microstructure, mechanical properties and high stress abrasive wear behavior of air-cooled MnCrB cast steels, Mater. Des. (1980-2015), 2010, 31: 2510–2516. 10.1016/j.matdes.2009.11.040
- Bensaid, K., Dhiflaoui, H., Bouzaiene, H., Yahyaoui, H., Fredj, N.B., Effects of the cooling mode on the integrity and the multi-pass micro-scratching wear resistance of Hardox 500 ground surfaces, Int. J. Adv. Manuf. Technol., 2021, 113: 2865–2882. 10.1007/s00170-021-06719-x
- Napiórkowski, J., Konat, Ł., Ligier, K., The structural properties and resistance to abrasive wear in soil of Creusabro steel, Tribologia, 2016, 269: 105–119. 10.5604/01.3001.0010.6611
- Zemlik, M., Konat, Ł., Napiórkowski, J., Comparative analysis of the influence of chemical composition and microstructure on the abrasive wear of high-strength steels, Materials, 2022, 15: 5083. 10.3390/ma15145083
- George, R., Bardelcik, A., Worswick, M.J., Hot forming of boron steels using heated and cooled tooling for tailored properties, J. Mater. Process. Technol., 2012, 212: 2386–2399. 10.1016/j.jmatprotec.2012.06.028
- Bardelcik, A., Salisbury, C.P., Winkler, S., Wells, M.A., Worswick, M.J., Effect of cooling rate on the high strain rate properties of boron steel, Int. J. Impact Eng., 2010, 37: 694–702. 10.1016/j.ijimpeng.2009.05.009
- Suh, C.H., Jang, W.S., Oh, S.K., Lee, R.G., Jung, Y.C., Kim, Y.S., Effect of cooling rate during hot stamping on low cyclic fatigue of boron steel sheet, Met. Mater. Int., 2012, 18: 559–566. 10.1007/s12540-012-4002-2
- Li, F.F., Fu, M.W., Lin, J.P., Effect of cooling path on the phase transformation of boron steel 22MnB5 in hot stamping process, Int. J. Adv. Manuf. Technol., 2015, 81: 1391–1402. 10.1007/s00170-015-7298-5
- Białobrzeska, B., Dziurka, R., Żak, A., Bała, P., The influence of austenitization temperature on phase transformations of supercooled austenite in low-alloy steels with high resistance to abrasion wear, Arch. Civ. Mech. Eng., 2018, 18: 413–429. 10.1016/j.acme.2017.09.004
- Cegiel, L., Konat, Ł., Pawłowski, T., Pękalski, G., Stale Hardox – nowe generacje materiałów konstrukcyjnych maszyn górnictwa odkrywkowego, Węgiel Brunatny, 2006, 3: 24–29
- Białobrzeska, B., Kostencki, P., Abrasive wear characteristics of selected low-alloy boron steels as measured in both field experiments and laboratory tests, Wear, 2015, 328–329: 149–159. 10.1016/j.wear.2015.02.003
- Moayyedian, M., Mohajer, A., Kazemian, M.G., Mamedov, A., Derakhshandeh, J.F., Surface roughness analysis in milling machining using design of experiment, SN Appl. Sci., 2020, 2: 1–9. 10.1007/S42452-020-03485-5/TABLES/7
- Turichin, G., Kuznetsov, M., Klimova-Korsmik, O., Sklyar, M., Zhitenev, A., Kurakin, A., et al., Laser-Arc hybrid welding perspective ultra-high strength steels: influence of the chemical composition of weld metal on microstructure and mechanical properties, Procedia CIRP, 2018, 74: 752–756. 10.1016/j.procir.2018.08.017
- Valtonen, K., Ojala, N., Haiko, O., Kuokkala, V.T., Comparison of various high-stress wear conditions and wear performance of martensitic steels, Wear, 2019, 426–427: 3–13. 10.1016/j.wear.2018.12.006
- Valtonen, K., Keltamäki, K., Kuokkala, V.T., High-stress abrasion of wear resistant steels in the cutting edges of loader buckets, Tribol. Int., 2018, 119: 707–720. 10.1016/j.triboint.2017.12.013
- Napiórkowski, J., Lemecha, M., Konat, Ł., Forecasting the wear of operating parts in an abrasive soil mass using the Holm-Archard model, Materials, 2019, 12: 2180. 10.3390/ma12132180
- Zemlik, M., Białobrzeska, B., Stachowicz, M., Hanszke, J., The influence of grain size on the abrasive wear resistance of Hardox 500 steel, Appl. Sci., 2024, 14: 11490. 10.3390/app142411490
- Zemlik, M., Konat, Ł., Leśny, K., Jamroziak, K., Comparison of abrasive wear resistance of Hardox steel and Hadfield cast steel, Appl. Sci., 2024, 14: 11141. 10.3390/app142311141
- Ligier, K., Zemlik, M., Lemecha, M., Konat, Ł., Napiórkowski, J., Analysis of wear properties of Hardox steels in different soil conditions, Materials, 2022, 15: 7622. 10.3390/ma15217622
- Szala, M., Szafran, M., Macek, W., Marchenko, S., Hejwowski, T., Abrasion resistance of S235, S355, C45, AISI 304 and Hardox 500 steels with usage of garnet, corundum and carborundum abrasives, Adv. Sci. Technol. Res. J., 2019, 13: 151–161. 10.12913/22998624/113244
- Tarasiuk, W., Napiórkowski, J., Ligier, K., Impact of slip speed on the wear intensity of 38GSA and Hardox 500 steels, Q. Tribologia, 2018, 280: 121–125. 10.5604/01.3001.0012.7552
- Tarasiuk, W., Napiórkowski, J., Ligier, K., Krupicz, B., Comparison of the wear resistance between Hardox 500 steel and 20MnCr5 steel, Q. Tribologia, 2017, 273: 165–170. 10.5604/01.3001.0010.6254
- Vargova, M., Tavodova, M., Monkova, K., Dzupon, M., Research of resistance of selected materials to abrasive wear to increase the ploughshare lifetime, Metals (Basel), 2022, 12: 940. 10.3390/met12060940
- Box, G.E.P., Some theorems on quadratic forms applied in the study of analysis of variance problems: II. Effect of inequality of variances and of correlation of errors in the two-way classification, Ann. Math. Stat., 1954, 25: 484–498. 10.1214/AOMS/1177728717
- Box, G.E.P., Some theorems on quadratic forms applied in the study of analysis of variance problems: I. Effect of inequality of variances in the one-way classification, Ann. Math. Stat., 1954, 25: 290–302. 10.1214/AOMS/1177728786
- Sharma, M., Ortlepp, I., Bleck, W., Boron in heat‐treatable steels: a review, Steel Res. Int., 2019, 90: 1900133. 10.1002/srin.201900133
- Wang, Z., Wu, X., Liu, D., Zuo, X., Correlation between microstructure and fracture behavior in thick HARDOX 450 wear-resistant steel with TiN inclusions, Front. Mater., 2021, 8: 691551. 10.3389/fmats.2021.691551
- Morito, S., Tanaka, H., Konishi, R., Furuhara, T., Maki, T., The morphology and crystallography of lath martensite in Fe-C alloys, Acta Mater., 2003, 51: 1789–1799. 10.1016/S1359-6454(02)00577-3
- Hidalgo, J., Santofimia, M.J., Effect of prior austenite grain size refinement by thermal cycling on the microstructural features of as-quenched lath martensite, Metall. Mater. Trans. A Phys. Metall Mater Sci., 2016, 47: 5288–5301. 10.1007/S11661-016-3525-4/FIGURES/12
- Kitahara, H., Ueji, R., Tsuji, N., Minamino, Y., Crystallographic features of lath martensite in low-carbon steel, Acta Mater., 2006, 54: 1279–1288. 10.1016/J.ACTAMAT.2005.11.001
- Pak, J.H., Bhadeshia, H.K.D.H., Karlsson, L., Keehan, E., Coalesced bainite by isothermal transformation of reheated weld metal, Sci. Technol. Weld. Join., 2008, 13: 593–597. 10.1179/136217108X338926
- Pak, J., Suh, D.W., Bhadeshia, H.K.D.H., Promoting the coalescence of bainite platelets, Scr. Mater., 2012, 66: 951–953. 10.1016/J.SCRIPTAMAT.2012.02.041
- Pak, J.H., Bhadeshia, H.K.D.H., Karlsson, L., Mechanism of misorientation development within coalesced martensite, Mater. Sci. Technol. (United Kingdom), 2012, 28: 918–923. 10.1179/1743284712Y.0000000023
- Pous-Romero, H., Bhadeshia, H., Coalesced martensite in pressure vessel steels, J. Press. Vessel. Technol. Trans. ASME, 2014, 136: 031402. 10.1115/1.4026192
- Ou, X., Sietsma, J., Santofimia, M.J., Coalescence of martensite under uniaxial tension of iron crystallites by atomistic simulations, Mater. Sci. Technol., 2020, 36: 1191–1199. 10.1080/02670836.2020.1762301
- Stachowiak, G.W., Batchelor, A.W., Engineering tribology, London, Butterworth-Heinemann, 2011
- Napiórkowski, J. (red.), Badania i modelowanie procesów zużywania ściernego i zmęczeniowego, Olsztyn, Wydawnictwo Uniwersytetu Warmińsko-Mazurskiego w Olszynie, 2014
- Chruszczow, M.M., Babiczew, M.A., Abrazivnoe iznosivanie, Izd. Nauka, Moskwa, 1970
- Stawicki, T., Białobrzeska, B., Kostencki, P., Tribological properties of plough shares made of pearlitic and martensitic steels, Metals (Basel), 2017, 7: 139. 10.3390/MET7040139
- Kovalev, A., Yazhao, Z., Hui, C., Meng, Y., A concept of the effective surface profile to predict the roughness parameters of worn surface, Front. Mech. Eng., 2019, 5: 31. 10.3389/FMECH.2019.00031/FULL
- Garcia-Suarez, J., Brink, T., Molinari, J.F., Roughness evolution induced by third-body wear, Tribol. Lett., 2024, 72: 1–10. 10.1007/S11249-024-01833-9/FIGURES/4
- Bigerelle, M., Mathia, T., Bouvier, S., The multi-scale roughness analyses and modeling of abrasion with the grit size effect on ground surfaces, Wear, 2012, 286–287: 124–135. 10.1016/j.wear.2011.08.006ï
DOI: https://doi.org/10.2478/msp-2025-0015 | Journal eISSN: 2083-134X (formerly 2083-124X) | Journal ISSN: 2083-1331
Language: English
Page range: 173 - 195
Submitted on: Mar 23, 2025
Accepted on: May 28, 2025
Published on: Mar 31, 2025
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2025 Martyna Zemlik, Beata Bialobrzeska, Mateusz Stachowicz, Lukasz Konat, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.