References
- Zafar, I., Sustainable Alternatives for Green Mortar: Quarry Waste and Ultra high fly ash utilization, In: The Proceedings of International Conference on Sustainability: Developments and Innovations – Prince Sultan University, Riyadh, KSA. IOP Conference Series: Earth and Environmental Science, 2022, Vol. 1026, No. 1, p. 012034
- Wendling, A., Sadhasivam, K., Floyd, R.W., Creep and shrinkage of lightweight self-consolidating concrete for prestressed members, Constr. Build. Mater., 2018, 167: 205–215
- Bischoff, P.H, Torres, L., Rational approach for computing long-term deflection of reinforced concrete, ACI Struct. J., 2021, 118: 215–224
- Mehta, P.K., Monteiro, P.J.M., Concrete: microstructure, properties, and materials. 4th ed., McGraw-Hill Education, 1325 Avenue of the Americas New York, NY 10019, USA, 2006
- Neville, A., Creep of concrete and behavior of structures part II: Dealing with problems, Concr. Int., 2002, 24(6): 52–55
- Zou, D., Liu, T., Teng, J., Du, C., Li, B., Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings, Constr. Build. Mater., 2014, 55: 46–56
- Mohammadhosseini, H., Alyousef, R., Lim, N.H., Tahir, M.M., Alabduljabbar, H., Mohamed, A.M. Creep and drying shrinkage performance of concrete composite comprising waste polypropylene carpet fibres and palm oil fuel ash, J. Build. Eng., 2020, 30: 101250
- Lee, J.H., Choi, R.J., Kwon, H.C., Min, K.H., An experimental study on creep characteristics of high strength concrete of 100 MPa, J. Korean Soc. Hazard. Mitig., 2018, 18: 13–18
- Frech-Baronet, J., Sorelli, L., Chen, Z., A closer look at the temperature effect on basic creep of cement pastes by microindentation, Constr. Build. Mater., 2020, 258: 119455
- Liu, Y.S., Pang, J.Y., Yao, W.J., Effects of high temperature on creep behaviour of glazed hollow bead insulation concrete, Materials, 2020, 13(17): 3658
- Ltifi, M., Zafar, I., Effect of total substitution of crushed limestone sand on concrete durability, Eur. J. Environ. Civ. Eng., 2019, 26(1): 121–143
- Muthusamy, K., Rasid, M.H., Jokhio, G.A., Budiea, A.M., Hussin, M.W., Mirza, J., Coal bottom ash as sand replacement in concrete: A review, Constr. Build. Mater., 2020, 236: 117507
- Mohammed, A.A., Mohammed, I.I., Mohammed, S.A., Some properties of concrete with plastic aggregate derived from shredded PVC sheets, Constr. Build. Mater., 2019, 201: 232–245
- Ismail, Z.Z., Al-Hashmi, E.A., Use of waste plastic in concrete mixture as aggregate replacement, Waste Manag., 2008, 28(11): 2041–2047
- Abu-Saleem, M., Zhuge, Y., Hassanli, R., Ellis, M., Rahman, Z., Levett, P., Evaluation of concrete performance with different types of recycled plastic waste for kerb application, Constr. Build. Mater., 2021, 293: 123477
- Islam, M.J., Shahjalal, M., Effect of polypropylene plastic on concrete properties as a partial replacement of stone and brick aggregate, Case Stud. Constr. Mater., 2021, 15: e00627
- Tayeh, B.A., Almeshal, I., Magbool, H.M., Alabduljabbar, H., Alyousef R., Performance of sustainable concrete containing different types of recycled plastic, J. Clean. Prod., 2021, 328: 129517
- Castillo, E.R., Almesfer, N., Saggi, O., Ingham, J.M., Light-weight concrete with artificial aggregate manufactured from plastic waste, Constr. Build. Mater., 2020, 265: 120199
- Alqahtani, F.K., Khan, M.I., Ghataora, G., Inventors; King Saud University, assignee. Synthetic aggregate for use in concrete, United States patent US 8,921,463, 2014
- Kim, Y.H., Trejo, D., Hueste, M.B.D., Kim, J.J., Experimental study on creep and durability of high-early-strength selfconsolidating concrete for precast elements, ACI Mater. J., 2011, 108: 128
- Wu, F., Liu, C., Sun, W., Zhang, L., Ma, Y., Mechanical and creep properties of concrete containing apricot shell lightweight aggregate, KSCE J. Civ. Eng., 2019, 23: 2948–2957
- Shen, D., Jiang, J., Shen, J., Yao, P., Jiang, G., Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age, Constr. Build. Mater., 2015, 99: 260–271
- Tang, W.C., Cui, H.Z., Wu, M., Creep and creep recovery properties of polystyrene aggregate concrete, Constr. Build. Mater., 2014, 51: 338–343
- Chen, H.J., Tsai, W.P., Tang, C.W., Liu T.H., Time-dependent properties of lightweight concrete using sedimentary lightweight aggregate and its application in prestressed concrete beams. Struct. Eng. Mech., 2011, 39: 833–847
- Alqahtani, F. K., U.S. Patent No. 10,294,155. U.S. Patent and Trademark Office, Washington, DC, 2019
- ASTM C136/C136M-14, Standard test method for sieve analysis of fine and coarse aggregates, ASTM International, West Conshohocken, PA, USA, 2014
- ASTM C29/C29M-16, Standard test method for bulk density (“Unit Weight”) and voids in aggregate, ASTM International, West Conshohocken, PA, USA, 2016
- ASTM C127-15, Standard test method for relative density (specific gravity) and absorption of coarse aggregate, ASTM International, West Conshohocken, PA, USA, 2015
- ACI 211.2-98, American Concrete-ACI Committee 211, Standard practice for selecting proportions for structural lightweight concrete, Farmington Hills, MI, 2004
- ACI 211.1-91, American Concrete Institute-ACI Committee 211, Standard practice for selecting proportions for normal, heavyweight, and mass concrete, Farmington Hills, MI, 2009
- BS EN 12390-7, Testing hardened concrete:Density of hardened concrete, British Standards Institution, London, UK, 2009
- ASTM C39/C39M-16, Standard test method for compressive strength of cylindrical concrete specimens, ASTM International, West Conshohocken, PA, USA, 2016
- ASTM C496/C496M-11, Standard test method for splitting tensile strength of cylindrical concrete specimens, ASTM International, West Conshohocken, PA, USA, 2011
- ASTM C469/C469M-14, Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression. ASTM International, West Conshohocken, PA, USA, 2014
- ASTM C944/C944M-12, Standard test method for abrasion resistance of concrete or mortar surfaces by the rotating-cutter method. ASTM International, West Conshohocken, PA, USA, 2012
- ASTM C512/C512M-15, Standard test method for creep of concrete in compression, ASTM International, West Conshohocken, PA, USA, 2015
- ASTM C33/C33M-16, Standard specification for concrete aggregates, ASTM International, West Conshohocken, PA, USA, 2016
- Sabaa, B., Ravindrarajah, R.S., Engineering properties of lightweight concrete containing crushed expanded polystyrene waste, Proceedings of the Symposium MM: Advances in Materials for Cementitious Composites, 1997, pp. 1–3
- AASHTO, AASHTO LRFD bridge design specifications, American Association of State Highway and Transportation Officials, Washington, DC, 2007
- ACI 209.2R-08, Guide for modeling and calculating shrinkage and creep in hardened concrete. American Concrete Institute, Farmington Hills, MI, 2008
- Shuraim, A.B., Aslam, F., Hussain, R.R., Alhozaimy, A.M., Coupled effect of coarse aggregate type and silica fume on creep coefficients of high-strength concrete, J. Mater. Civ. Eng., 2016, 28, 04016159
- Sheng-qi, M., Jie-chao, Z., Yuan-feng, W., Ruo-fei, Z., Creep-recovery of normal strength and high strength concrete, Constr. Build. Mater., 2017, 156: 175–183
- Bajaber, M.A., Hakeem, I.Y., UHPC evolution, development, and utilization in construction: a review, J. Mater. Res. Technol., 2021, 10: 1058–1074
- Zeyad, A.M., Khan, A.H., Tayeh, B.A., Durability and strength characteristics of high-strength concrete incorporated with volcanic pumice powder and polypropylene fibers, J. Mater. Res. Technol., 2010, 9: 806–818
- Wu, F., Liu, C., Sun, W., Ma, Y., Zhang, L., Effect of peach shell as lightweight aggregate on mechanics and creep properties of concrete, Eur. J. Environ. Civ. Eng., 2020, 24: 2534–2552
- Jansen, D.C., Kiggins, M.L., Swan, C.W., Malloy, R.A., Kashi, M.G., Chan, R.A., et al., Lightweight fly ash-plastic aggregates in concrete, Transp. Res. Rec., 2001, 1775(1): 44–52
- Al-Manaseer, A.A., Dalal, T.R., Concrete containing plastic aggregates. Concr. Int., 1997, 19(8): 47–52
- Lima, P.R., Leite, M.B., Santiago, E.Q., Recycled lightweight concrete made from footwear industry waste and CDW, Waste Manag., 2010, 30(6): 1107–1113