References
- Mahmood, A., Akram, T., Chen, H., Chen, S., On the evolution of additive manufacturing (3D/4D printing) technologies: Materials, applications, and challenges, Polymers, 2022, 14: 4698
- Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T., Hui, D., Additive manufacturing (3D printing): A review of materials, methods, applications and challenges, Compos. Part. B, 2018, 143: 172–196
- Przybytek, A., Kucińska-Lipka, J., Janik, H., Thermoplastic elastomer filaments and their application in 3D printing, Elastomery, 2016, 2016(20): 32–39
- Zhu, W., Pyo, S. H., Wang, P., You, S., Yu, C., Alido, J., et al., Three-dimensional printing of bisphenol A-free polycarbonates, ACS Appl. Mater. Interfaces, 2018, 10(6): 5331–5339
- Żur, P., Kołodziej, A., Baier, A., Kokot, G., Optimization of ABS 3D-printing method and parameters, Eur. J. Eng. Sci. Technol., 2020, 3(1): 44–51
- Zhang, Y., Purssell, C., Mao, K., Leigh, S., A physical investigation of wear and thermal characteristics of 3D printed nylon spur gears, Tribol. Int., 2020, 141: 105953
- Liu, L., Lin, M., Xu, Z., Lin, M., Polylactic acid-based wood-plastic 3D printing composite and its properties, BioResources, 2019, 14(4): 8484–8498
- Singh, S., Singh, G., Prakash, C., Ramakrishna, S., Current status and future directions of fused filament fabrication, J. Manuf. Process., 2020, 55: 288–306
- Maurus, P. B., Kaeding, C. C., Bioabsorbable implant material review, Oper. Tech. Sports Med., 2004, 12: 158–160
- Iheaturu, N. C., Diwe, I. V., Banigo, A. T., Daramola, O. O., Sadiku, E. R., Synthesis of polymeric biomaterial for medicine and surgery, In: Gnanasekaran, D., editor, Green biopolymers and their nanocomposites, Springer, Berlin, Germany, 2019, pp. 267–282
- Krishnan, S., Pandey, P., Mohanty, S., Nayak, S. K., Toughening of polylactic acid: An overview of research progress, Polym. Plast. Technol. Eng., 2016, 55(15): 1623–1652
- Ferri, J. M., Jordá, J., Montanes, N., Fenollar, O., Balart, R., Manufacturing and characterization of poly (lactic acid) composites with hydroxyapatite, J. Thermoplast. Compos. Mater., 2018, 31(7): 865–881
- Umerah, C. O., Kodali, D., Head, S., Jeelani, S., Rangari, V. K., Synthesis of carbon from waste coconut shell and their application as filler in bioplast polymer filaments for 3D printing, Compos. Part. B Eng., 2020, 202: 108428
- Lohar, D. V., Nikalje, A. M., Damle, P. G., Development and testing of hybrid green polymer composite (HGPC) filaments of PLA reinforced with waste bio fillers, Mater. Today Proc., 2022, 62: 818–824
- Calì, M., Pascoletti, G., Gaeta, M., Milazzo, G., Ambu, R., A new generation of bio-composite thermoplastic filaments for a more sustainable design of parts manufactured by FDM, Appl. Sci., 2020, 10(17): 5852
- Bhagia, S., Bornani, K., Agrawal, R., Satlewal, A., Ďurkovič, J., Lagaňa, R., et al., Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries, Appl. Mater. Today, 2021, 24: 101078
- Lee, C. H., Padzil, F. N. B. M., Lee, S. H., Ainun, Z. M. A. A., Abdullah, L. C., Potential for natural fiber reinforcement in PLA polymer filaments for fused deposition modeling (FDM) additive manufacturing: A review, Polymers, 2021, 13(9): 1407
- Udhayakumar, A., Mayandi, K., Rajini, N., Devi, R. K., Muthukannan, M., Murali, M., Extraction and characterization of novel natural fiber from Cryptostegia grandiflora as a potential reinforcement in biocomposites, J. Nat. Fibers, 2023, 20(1): 2159607
- Mohan, A., Priya, R. K., Arunachalam, K. P., Avudaiappan, S., Maureira-Carsalade, N., Roco-Videla, A., Investigating the mechanical, thermal, and crystalline properties of raw and potassium hydroxide treated butea parviflora fibers for green polymer composites, Polymers, 2023, 15(17): 3522
- Wang, S., Capoen, L., D’hooge, D. R., Cardon, L., Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly (lactic acid) filaments into 3D printed materials?, Plast., Rubber Compos., 2018, 47(1): 9–16
- Nasir, M. H. M., Taha, M. M., Razali, N., Ilyas, R. A., Knight, V. F., Norrrahim, M. N. F., Effect of chemical treatment of sugar palm fibre on rheological and thermal properties of the PLA composites filament for FDM 3D printing, Materials, 2022, 15(22): 8082
- Deb, D., Jafferson, J. M., Natural fibers reinforced FDM 3D printing filaments, Mater. Today Proc., 2021, 46: 1308–1318
- Song, X., He, W., Han, X., Qin, H., Fused deposition modeling of poly (lactic acid)/nutshells composite filaments: Effect of alkali treatment, J. Polym. Environ., 2020, 28: 3139–3152
- Ohaeri, O., Cree, D., Development and characterization of PHB-PLA/corncob composite for fused filament fabrication, J. Compos. Sci., 2022, 6(9): 249
- Mansingh, B. B., Binoj, J. S., Tan, Z. Q., Wong, W. L. E., Amornsakchai, T., Hassan, S. A., et al., Characterization and performance of additive manufactured novel bio-waste polylactic acid eco-friendly composites, J. Polym. Environ., 2023, 31: 2306–2320
- Magalhães da Silva, S. P., Antunes, T., Costa, M. E. V., Oliveira, J. M., Cork-like filaments for Additive Manufacturing, Addit. Manuf., 2020, 34: 101229
- Ahmad, N. D., Wildan, M. W., Preparation and properties of cellulose nanocrystals-reinforced poly (lactic acid) composite filaments for 3D printing applications, Results Eng., 2023, 17: 100842
- Vârban, R., Crișan, I., Vârban, D., Ona, A., Olar, L., Stoie, A., et al., Comparative FT-IR prospecting for cellulose in stems of some fiber plants: Flax, velvet leaf, hemp and jute, Appl. Sci., 2021, 11(18): 8570
- Lv, P., Perre, P., Perré, G. A., TGA-FTIR analysis of torrefaction of lignocellulosic components (cellulose, xylan, lignin) in isothermal conditions over a wide range of time durations, BioResources, 2015, 10(3): 4239–4251
- Oh, S. Y., Yoo, D. I., Shin, Y., Seo, G., FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide, Carbohydr. Res., 2005, 340(3): 417–428
- Hospodarova, V., Singovszka, E., Stevulova, N., Characterization of cellulosic fibers by FTIR spectroscopy for their further implementation to building materials, Am. J. Anal. Chem., 2018, 9(6): 303–310
- Sugumaran, P., Susan, V. P., Ravichandran, P., Seshadri, S., Production and characterization of activated carbon from banana empty fruit bunch and Delonix regia fruit pod, J. Sustain. Energy Environ., 2012, 3(3): 125–132
- Popescu, C. M., Popescu, M. C., Vasile, C., Characterization of fungal degraded lime wood by FT-IR and 2D IR correlation spectroscopy, Microchem. J., 2010, 95(2): 377–387
- Johny, V., Kuriakose Mani, A., Palanisamy, S., Rajan, V. K., Palaniappan, M., Santulli, C., Extraction and physico-chemical characterization of pineapple crown leaf fibers (PCLF), Fibers, 2023, 11(1): 5
- Wang, X., Hu, Y., Song, L., Xuan, S., Xing, W., Bai, Z., et al., Flame retardancy and thermal degradation of intumescent flame retardant poly (lactic acid)/starch biocomposites, Ind. Eng. Chem. Res., 2011, 50(2): 713–720
- Udhayakumar, A., Mayandi, K., Rajini, N., Devi, R. K., Muthukannan M., Murali M., et al., Effect of chemical treatment on physico-chemical properties of a novel extracted cellulosic Cryptostegia grandiflora fiber, Mater. Res. Express, 2023, 10(7): 075508
- Mathew A. P., Oksman K., Sain M., The effect of morphology and chemical characteristics of cellulose reinforcements on the crystallinity of polylactic acid, J. Appl. Polym. Sci., 2006, 101: 300–310
- Revati R., Majid M. A., Ridzuan M. J. M., Basaruddin K. S., Cheng E. M., Gibson A. G., In vitro degradation of a 3D porous Pennisetum purpureum/PLA biocomposite scaffold, J. Mech. Behav. Biomed. Mater., 2017, 74: 383–391
- Park S., Baker J. O., Himmel M. E., Parilla P. A., Johnson D. K., Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance, Biotechnol. Biofuels, 2010, 3: 1–10
- French A. D., Santiago Cintrón M., Cellulose polymorphy, crystallite size, and the Segal Crystallinity Index, Cellulose, 2013, 20: 583–588
- Marathe Y. N., Arun Torris A. T., Ramesh C., Badiger M. V., Borassus powder‐reinforced poly (lactic acid) composites with improved crystallization and mechanical properties, J. Appl. Polym. Sci., 2019, 136(18): 47440