References
- Korbel A, Bochniak W. Method of plastic forming of materials. US5737959A, 1998 [Accessed 8th August 2020]. https://patents.google.com/patent/US5737959/en?oq=korbel+bochniak [Accessed 8th August 2020].
- Bochniak W, Korbel A. Method of plastic forming of materials. EP0711210B1, 2000 [Accessed 8th August 2020]. https://patents.google.com/patent/EP0711210B1/en?oq=korbel+bochniak [Accessed 8th August 2020].
- Bochniak W. Teoretyczne i praktyczne aspekty plastycznego kształowania metali: metoda KoBo. Kraków: Wydawnictwa AGH; 2009.
- Sztwiertnia K, Kawałko J, Bieda M, Berent K. Microstructure of Polycrystalline Zinc Subjected to Plastic Deformation by Complex Loading / Mikrostruktura Polikrystalicznego Cynku Odkształconego Plastycznie W Złozonym Schemacie Deformacji. Arch. Metall. Mater. 2013;58(1): 157–161. doi: 10.2478/v10172-012-0167-4
- Bochniak W, Korbel A, Ostachowski P, Ziółkiewicz S, Borowski J. Wyciskanie metali i stopów metodą KOBO. Obróbka Plastyczna Metali. 2013;XXIV(2).
- Korbel A, Bochniak W, Ostachowski P, Błaż L. Visco-Plastic Flow of Metal in Dynamic Conditions of Complex Strain Scheme. Metall. Mater. Trans. A. 2011;42(9): 2881–2897. doi: 10.1007/s11661-011-0688-x
- Zwolak M, Śliwa RE. Fizyczne modelowanie plastycznego płyniêcia w procesie wyciskania metodą KOBO z użyciem matryc o różnej geometrii. Obróbka Plastyczna Metali. 2017;28(4). http://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-03be5e17-d90d-4187-8020-9f026b33aed2
- Korbel A, Bochniak W. Refinement and control of the metal structure elements by plastic deformation. Scr. Mater. 2004;51(8): 755–759. doi: 10.1016/j.scriptamat.2004.06.020
- Korbel A, Pieła K, Ostachowski P, Łagoda M, Błaż L, Bochniak W, et al. Structural phenomena induced in the course of and post low-temperature KOBO extrusion of AA6013 aluminum alloy. Mater. Sci. Eng., A. 2018;710: 349–358. doi: 10.1016/j.msea.2017.10.095
- Balawender T, Zwolak M, Bąk Ł. Experimental Analysis of Mechanical Characteristics of KOBO Extrusion Method. Arch. Metall. Mater. 2020;65(2): 615–619. doi: 10.24425/AMM.2020.132800.
- Kong LX, Hodgson PD, Wang B. Development of constitutive models for metal forming with cyclic strain softening. J. Mater. Process. Technol. 1999;89–90: 44–50. doi: 10.1016/S0924-0136(99)00015-1
- Kong LX, Hodgson PD. Constitutive modelling of extrusion of lead with cyclic torsion. Mater. Sci. Eng., A. 2000;276(1–2): 32–38. doi: 10.1016/S0921-5093(99)00511-0.
- Maciejewski J, Mróz Z. An upper-bound analysis of axisymmetric extrusion assisted by cyclic torsion. J. Mater. Process. Technol. 2008;206(1–3): 333–344. doi: 10.1016/j.jmatprotec.2007.12.061.
- Lukaszkowicz K. Forming the structure and properties of hybrid coatings on reversible rotating extrusion dies. J. Achiev. Mater. Manuf. Eng. 2012;55(2): 66.
- Wójcik M, Skrzat A. The Coupled Eulerian-Lagrangian Analysis of the KOBO Extrusion Process. Adv. Sci. Technol. Res. J. 2021;15(1): 197–208. doi: 10.12913/22998624/131663.
- Totten GE, Tiryakioḡlu M, Kessler O, [eds.]. Encyclopedia of Aluminum and Its Alloys, Two-Volume Set (Ebook). 1st ed. Boca Raton, FL: CRC Press; 2018.
- J. R. Davis & Associates, ASM International, [eds.]. Aluminum and aluminum alloys. Materials Park, OH: ASM International; 1993.
- Sheppard T, Tunnicliffe PJ, Patterson SJ. Direct and indirect extrusion of a high strength aerospace alloy (AA 7075). J. Mech. Work. Technol. 1982;6(4): 313–331. doi: 10.1016/0378-3804(82)90031-6.
- Rokni MR, Zarei-Hanzaki A, Abedi HR, Haghdadi N. Microstructure evolution and mechanical properties of backward thixoextruded 7075 aluminum alloy. Mater. Des. 2012;36: 557–563. doi: 10.1016/j.matdes.2011.11.061.
- Song Y, Zhang Z, Wang K, Li H, Zhu Z. Effects of Extrusion Processing on Microstructure of 7075Al Alloy in the Semi-solid State. J. Wuhan Univ. Technol. Mater. Sci. Ed. 2019;34(6): 1433–1443. doi: 10.1007/s11595-019-2210-z.