References
- Nadgorny M, Ameli A. Functional polymers and nanocomposites for 3D printing of smart structures and devices. ACS Appl. Mater. Interfaces. 2018;10:17489–17507.
- Ning F, Cong W, Hu Y, Wang H. Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties. J Compos Mater. 2017;51(4):451–62.
- Joshi SC, Sheikh AA. 3D printing in aerospace and its long-term sustainability. Virtual Phys. Prototyp. 2015;10(4):175–185.
- Jinka RK, Mayandi K, Joe P, Gnanaraj S, Chandrasekar K, Ramalingam PS. A critical review of an additive manufacturing role in Covid-19 epidemic. Mater. Today Proc. 2022;68:1521–1527.
- Lim CWJ, Le KQ, Lu Q, Wong CH. An overview of 3-D printing in manufacturing, aerospace, and automotive industries. IEEE potentials. 2016;35(4):18–22.
- Wang Y, Weng Y, Wang L. Characterization of interfacial compatibility of poly lactic acid and bamboo flour (PLA/BF) in biocomposites. Polym. Test. 2014;36: 119–125.
- Chacon JM, Caminero MA, Núnez PJ, García-Plaza E, García-Moreno I., Reverte JM. Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties. Compos. Technol. 2019;181.
- Fuenmayor E, O’Donnell C, Gately N, Doran P, Devine DM., Lyons JG, et al. Mass-customization of oral tablets via the combination of 3D printing and injection molding. Int. J. Pharm. 2019;569:118611.
- Guo N, Leu MC. Additive manufacturing: Technology, applications and research needs. Front. Mech. Eng. 2013;8:215–243.
- Parandoush P, Lin D. A review on additive manufacturing of polymer-fiber composites. Compos. Struct. 2017;182:36–53.
- Manzoor F, Golbang A, Jindal S, Dixon D, McIlhagger A, Harkin-Jones E, et al. 3D printed PEEK/HA composites for bone tissue engineering applications: Effect of material formulation on mechanical performance and bioactive potential. J Mech Behav Biomed Mater. 2021 Feb;121:104601.
- Gu D, Meiners W, Wissenbach K, Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int. Mater. Rev. 2012;57(3):133–64.
- Guo N, Leu MC. Additive manufacturing: Technology, applications and research needs. Front. Mech. Eng. 2013;8:215–243.
- Parandoush P, Lin D. A review on additive manufacturing of polymer-fiber composites. Compos. Struct. 2017;182:36–53.
- Jaya Christiyan KG, Chandrasekhar U, Venkateswarlu.. IOP Conf. Series: A study on the influence of process parameters on the mechanical properties of 3D printed ABS composite. Mater. Sci. Eng. 2016;114:012109. doi: 10.1088/1757-899X/114/1/012109
- Tontowi AE, Ramdani L, Erdizon RV, Baroroh DK. Optimization of 3D-printer process parameters for improving quality of polylactic acid printed part. 2017 May;9(2).
- Singh S, Ramakrishna S, Berto F. 3D printing of polymer composites: A short review. Mater. Des. Process. Commun. 2019 Jul 29;2(2):e97. doi: 10.1002/mdp 2.97
- Lewicki J, Rodriguez J, Zhu C, Worsely MA, Wu AS, Kanrska Y, et al. 3D-printing of meso-structurally ordered carbon fiber/polymer composites with unprecedented orthotropic physical properties. Sci Rep. 2017;7:43401. doi: 10.1038/srep43401
- Sethu Ramalingam P, Mayandi K, Rajini N, Abdul Munaf AKS, Rajesh KK, Oluwarotimi IS, et al. Experimental investigation and statistical analysis of additively manufactured onyx-carbon fiber reinforced composites. J. Appl. Polym. Sci. 2021 May 10;138(18):50338. doi: 10.1002/app.48777
- Saeed K, McIlhagger A, Harkin-Jones E, McGarrigle C, Dixon D, Ali Shar M, et al. Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions. Compos. Struct. 2022 Feb 15;282:115033. doi: 10.1016/j.compstruct.2021.115033
- Lizut M, Wojs MK. Research on clutch lever of ktm motorcycle produced by using 3d printing. Zest. Inst. Pojazdów. 2017;110(1):119–126. Available from: http://repo.pw.edu.pl/
- Saeed K, McIlhagger A, Harkin-Jones E, Kelly J, Archer E. Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory. Compos. Struct. 2021 Mar 1;259:113226. doi: 10.1016/j.compstruct.2020.113226
- Dantas F, Couling K, Gregory JG. Long-fibre reinforced polymer composites by 3D printing: influence of nature of reinforcement and processing parameters on mechanical performance. Funct. Compos. Mater. 2020 Sep 21;1(7). doi: 10.1186/s42252-020-00010-0
- Rajendran S, Palani G, Kanakaraj A, Shanmugam V, Veerasimman A, Gądek S, et al. Metal and polymer based composites manufactured using additive manufacturing—A brief review. Polymers. 2023;15(11):2564. doi: 10.3390/polym15112564
- Giannakis, E. Mechanical properties of 3D printed specimens. International Hellenic University, Thermi; 2018 Mar. Available from: http://hdl.handle.net/11544/29064
- Kalimuthu M, Nagarajan R, Batcha AA, Siengchin S, Anumakonda VR, Ayrilmis N. Mechanical property and morphological analysis of polyester composites reinforced with Cyperus pangorei fibers. J Bionic Eng. 2019;16:164–174. doi: 10.1007/s42235-019-0015-6
- Karolina EM, Borucka A, Kaczor P, Gądek S, Bogucki R, Mirzewiñski D, et al. Mechanical, thermal and microstructural characteristic of 3D printed polylactide composites with natural fibers: Wood, bamboo and cork. J Polym Environ. 2022;30:2341–2354. doi: 10.1007/s10924-021-02356-3
- Li H, Liu B, Ge L, Chen Y, Zheng H, Fang D, Mechanical performances of continuous carbon fiber reinforced PLA composites printed in vacuum. Compos. B. Eng. 2021;225:109277.
- Lay M, Thajudin NLN, Ain Abdul Hamid Z, Rusli A, Khalil Abdullah M, Shuib RK. Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding. Compos. B. Eng. 2019;176:107341. doi: 10.1016/j.compositesb.2019.107341
- Parida C, Dash SK, Chaterjee P. Mechanical properties of injection molded poly(lactic) acid—luffa fiber composites. Soft Nanosci. Lett. 2015;5(4). doi: 10.4236/snl.2015.54008