References
- Yi XS’ Du S, Zhang L, editors. Composite materials engineering. Volume 1, Fundamentals of composite materials. Beijing: Springer; Chemical Industry Press Singapore, 2018.
- Olaleye K, Roik T, Kurzawa A, Gavrysh O, Vit-siuk I, Jamroziak K. Structure formation in antifriction composites with a nickel matrix and its effect on properties. Materials. 2022;15(9):3404. doi: 10.3390/ ma15093404
- Cheng J, Zhen J, Zhu S, Yang J, Ma J, Li W, et al. Friction and wear behavior of Ni-based solid-lubricating composites at high temperature in a vacuum environment. Mater Des. 2017;122:405-13. doi: 10.1016/ j.matdes.2017.03.030
- Neale MJ. Tribology Handbook. 2nd edition. Butterworth-Heinemann: Elsevier Ltd.; 1996.
- Samal PK, Newkirk JW, editors. Powder metallurgy. Vol. 7. New York: ASM International; 2015.
- Jamroziak K, Roik T. Structure and properties of the new antifriction composite materials for high-temperature friction units. In: Abdel-Wahab M, editor. Proceedings of the 7th International Conference on Fracture Fatigue and Wear. Singapore: Springer Singapore; 2019. p. 628-37.
- Attaei M, Calado LM, Taryba MG, Morozov Y, Shakoor RA, Kahraman R, et al. Autonomous selfhealing in epoxy coatings provided by high efficiency isophorone diisocyanate (IPDI) microcapsules for protection of carbon steel. Prog Org Coatings. 2020;139:105445. doi: 10.1016/j.porgcoat.2019.105445
- Dangsheng X. Lubrication behavior of Ni-Cr-based alloys containing MoS2 at high temperature. Wear. 2001;251(1):1094-9. doi: 10.1016/S0043-1648(01)00 803-1
- Zhu S, Cheng J, Qiao Z, Yang J. High temperature solid-lubricating materials: a review. Tribol Int. 2019 May;133:206-23. doi: 10.1016/j.triboint.2018.12.037
- Adamov AA, Kamenskikh AA, Pankova AP. Influence analysis of the antifriction layer materials and thickness on the contact interaction of spherical bearings elements. Lubricants. 2022;10(2):1-13. doi: 10.3390/lubri-cants10020030
- Wu G, Xu C, Xiao G, Yi M, Chen Z. Structure design of Al2 O3/TiC/CaF2 multicomponent gradient self-lubricating ceramic composite and its tribological behaviors. Ceram Int. 2018;44(5):5550-63. doi: 10. 1016/j.ceramint.2017.12.199
- Mohan S, Anand A, Arvind Singh R, Jayalak-shmi S, Chen X, Konovalov S. Friction and wear study of Fe-Cu-C-CaF2 self-lubricating composite at high speed and high temperature. IOP Conf Ser Mater Sci Eng. 2020;834(1):012010. doi: 10.1088/1757-899X/834/1/012010
- Fangyi Zhai BH, Mi G. Effect of MoS2 content on anti-friction and wear-resistance of nickel-based alloy cladding layer. Ferroelectrics. 2023;607(1):117-25. doi: 10.1080/00150193.2023.2198379
- Ramesh CS, Keshavamurthy R, Channabasappa BH, Pramod S. Friction and wear behavior of Ni-P coated Si3N4 reinforced Al6061 composites. Tribol Int. 2010;43(3):623-34. doi: 10.1016/j.triboint.2009.0 9.011
- Buketov AV, Brailo M, Sapronov OO, Kruglyj DG, Appazov ES, Dulebova L, et al. Nanofilled antifriction polymeric composite materials for parts of friction unitsof sea and river transport. J Nano-Electron Phys. 2020;l2(5):l-6. doi: 10.21272/jnep.12(5).05025
- Lu Y, Yang X, Yang X, Xiao R, Wang P. Research of anti-friction performance of Ni60 alloy coating optimized by multiple high aluminum bronze. J Funct Mater. 2016;47(1):1097-101. doi: 10.3969/j.issn.1001-9731.2016.01.020
- Changchuan W, Wang R, Peng C, Feng Y, Wei X. Effects of hBN surface plated nickel on properties of Ni-20Cr/hBN self-lubricating composites. Chinese J Mater Res. 2011;25(5):509-16.
- Bin C, Tan Y, Tang J, Tan H, Wang W. Research on friction and wear properties of CaF2/TiC/Ni-base alloy composite coatings at different temperatures. Acta Armamentarii. 2014;35(6):900-7. doi: 10.3969/j.issn. 1000-1093.2014.06.022
- Shekhar C, Wani MF, Seghal R. Fabrication and self-lubricating tribological characterisation of Cu-Ni/ TiC/CaF2 composite for railway switch slide baseplate. Wear 2023 August 15;526:204890. doi: 10.1016/j.wear. 2023.204890
- Roik TA, Vitsiuk I, Gavrysh OA. Wear resistant composite material based on nickel. Patent of Ukraine; 135075, 2019. p. 4.
- Tang S, Wang R, Liu P, Niu Q, Yang G, Liu W, et al. Preparation of WC-TiC-Ni3Al-CaF2 functionally graded self-lubricating tool material by microwave sintering and its cutting performance. High Temp Mater Process. 2020;39:45-53. doi: 10.1515/htmp-2020-0004
- Guo N, Chen Z, Xiao G, Li Q, Zhang S, Yi M, et al. Cutting performance and wear resistance of Al2O3/ TiC/CaF2@Al2O3 ceramic tools in dry machining of hardened steel. J Ceram Soc Japan. 2021;129(12):697-706. doi: 10.2109/jcersj2.21123
- Ji L, Chen Z, Guo R, Xu C, Guo N. Preparia-tion of nano-coating powder CaF2@ Al(OH)3 and its application in Al2O3/Ti(C,N) self-lubricating ceramic tool materials. Ceram Int. 2020;46:15949-57. doi: 10.1016/j.ceraint.2020.03.144
- Zhang Y, Chromik RR. Tribology of self-lubricating metal matrix composites. In: L. Menezes, K. Rohatgi, Omranie E, editors. Self-lubricating composites monograph. Berlin: Springer Nature; 2018. p. 33-73.
- Cai B, Tan Y, Tu Y, Wang X, Tan H. Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles. Trans Nonferrous Met Soc China. 2011;21(11):2426-32. doi: 10.1016/S1003-6326(11)61031-5
- Li JL, Xiong DS. Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection. Wear 2008 Jul 3l;265(3-4):533-9. doi: 10.1016/j.wear.2007.09.005
- Kotkowiak M, Piasecki A, Kulka M. The influence of solid lubricant on tribological properties of sintered Ni-20%CaF2 composite material. Ceram Int. 2019. doi: 10.1016/j.ceramint.2019.05.262
- Naim Katea S, Tai CW, Ström P, Larsson PO, Vidarsson H, Westin G. Niobium carbide-Nickelniobium alloy composites from a nickel coated powder: microstructural development during sintering. Open Ceram. 2021;6:100096. doi: 10.1016/j.oceram.2021. 100096
- Kruzhanov VS. Modern manufacturing of powder-metallurgical products with high density and performance by press-sinter technology. Powder Metal Met Ceram. 2018;57(7):43l-46. doi: 10.1007/s11106-018-0002-1
- Ogbonna VE, Popoola PI, Popoola OM, Adeosun SO. A review on recent advances on improving polyimide matrix nanocomposites for mechanical, thermal, and tribological applications: challenges and recommendations for future improvement. J Thermoplast Compos Mater. 2023;36(2):836-65. doi: 10.1177/08927057211007904
- Ji Z, Zhang L, Xie G, Xu W, Guo D, Luo J, et al. Mechanical and tribological properties of nanocomposites incorporated with two-dimensional materials. Friction. 2020;8(5):813-46. doi: 10.1007/s40544-020-0401-4
- Atkinson HV, Davies S. Fundamental aspects of hot isostatic pressing: an overview. Metal Mater TransA. 2000;31(12):2981-3000. doi: 10.1007/s11661-000-0078-2
- Dempster I, Wallis R. Heat treatment metallurgy of nickel-base alloys. In: George E. Totten, editor. Heat treating of nonferrous alloys. 4th ed. ASM International; 2016. p. 399-425.
- Kluczyfiski J, Sniezek L, Grzelak K, Oziêbło A, Perkowski K, Torzewski J, et al. Hot isostatic pressing influence on the mechanical properties of selectively laser-melted 316L steel. Bull Polish Acad Sci Tech Sci. 2020;68(6):1413-24. doi: 10.24425/bpasts.2020. 135396
- Sniezek L, Kosturek R, Wachowski M, Kania B. Microstructure and residual stresses of AA2519 friction stir welded joints under different heat treatment conditions. Materials. 2020;13(4):834. doi: 10.3390/ma1304 0834
- Li Y, Zhu W, Li Q, Qiu S, Zhang J. Phase equilibria in the Nb-Ti side of the Nb-Si-Ti system at l2OO°C and its oxidation behavior. J Alloys Compd. 2017;704:311-21. doi: 10.1016/j.jallcom.2017.02.007