Comparative evaluation of mechanical properties of short aramid fiber on thermoplastic polymers
By:
References
- Zhandarov S, Mäder E. Characterization of fiber/matrix interface strength: Applicability of different tests, approaches and parameters. Compos Sci Technol. 2005;65: 149–160.
- Al-Furjan MSH, Shan L, Shen X, et al. A review on fabrication techniques and tensile properties of glass, carbon, and kevlar fiber reinforced polymer composites. J Mater Res Technol. 2022;19: 2930–2959.
- Sajan S, Philip Selvaraj D. A review on polymer matrix composite materials and their applications. Mater Today Proc. 2021;47: 5493–5498.
- Wang M, Pan Z, Wu Z, et al. Effect of carbon/Kevlar asymmetric hybridization ratio on the low-velocity impact response of plain woven laminates. Compos Struct. 2021;276: 114574.
- Kalantar J, Drzal LT. The bonding mechanism of aramid fibres to epoxy matrices - Part 1 A review of the literature. J Mater Sci. 1990;25: 4186–4193.
- Muthalagu R, Murugesan J, Sathees Kumar S, et al. Tensile attributes and material analysis of kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications. Mater Today Proc. 2021;46: 433–438.
- Jaiswal G, Singha MK, Das D. Mechanical behavior of aramid-polypropylene fiberweb composites. Compos Struct 2021; 268: 113938.
- Amran M, Fediuk R, Vatin N, et al. Fibre-reinforced foamed concretes: A review. Materials (Basel) 2020; 13: 1–36.
- Geo J, Yang X, Guo J, et al. Hyperelastic mechanical properties of chopped aramid fiber-reinforced rubber composite under finite strain. Compos Struct 2020; 243: 112187.
- Arroyo M, Bell M. Morphology/behavior relationship and recyclability of composites based on PP/EPDM blends and short aramid fibers. J Appl Polym Sci. 2002;83: 2474–2484.
- Sarasini F, Tirillò J, Valente M, et al. Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties. Mater Des. 2013;49: 290–302.
- Shibulal GS and Naskar K, Structurally Different Short Aramid Fiber–Reinforced Thermoplastic Polyurethane. Polymer Composites, 2014; 35(9): 1767–1778. https://doi.org/10.1002/pc.22830
- Ari A, Karahan M, Ahmed HAM, Babiker O, Dehşet RMA. A Review of Cellulosic Natural Fibers’ Properties and Their Suitability as Reinforcing Materials for Composite Panels and Applications. AATCC Journal of Research. 2023;10(3):163-183. doi:10.1177/24723444221147365
- Bazan P, Nosal P, Wierzbicka-Miernik A, et al. A novel hybrid composites based on biopolyamide 10.10 with basalt/aramid fibers: Mechanical and thermal investigation. Compos Part B Eng. 223. Epub ahead of print 2021. DOI: 10.1016/j.compositesb.2021.109125.
- Vajrasthira C, Amornsakchai T, Bualek-Limcharoen S. Fiber-matrix interactions in aramid-short-fiber-reinforced thermoplastic polyurethane composites. J Appl Polym Sci. 2002;87: 1059–1067.
- Siva R, Sundar Reddy Nemali S, Kishore Kunchapu S, et al. Comparison of mechanical properties and water absorption test on injection molding and extrusion - injection molding thermoplastic hemp fiber composite. Mater Today Proc. 2021;47: 4382–4386.
- Crabtree SL, Spalding MA, Pavlicek CL. Single-screw extruder zone temperature selection for optimized performance. Tech Pap Reg Tech Conf - Soc Plast Eng. 2008;3: 1406–1411.
- da Costa HM, Ramos VD, de Oliveira MG. Degradation of polypropylene (PP) during multiple extrusions: thermal analysis, mechanical properties and analysis of variance. Polym Test. 2007;26: 676–684.
- Fu SY, Lauke B, Mäder E, et al. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites. Compos Part A Appl Sci Manuf. 2000;31: 1117–1125.
- Delli E, Giliopoulos D, Bikiaris DN, et al. Fibre length and loading impact on the properties of glass fibre reinforced polypropylene random composites. Compos Struct. 263. Epub ahead of print 2021. DOI: 10.1016/j.compstruct.2021.113678.
- Savaşkan M, Taptık Y, Ürgen M. Deney tasarimi yöntemi ile matkap uçlarinda performans optimizasyonu. Itüdergisi/D. 2004;117–128.
- Kumar S, Balachander S. Studying the effect of reinforcement parameters on the mechanical properties of natural fibre-woven composites by Taguchi method. J Ind Text. 2020;50: 133–148.
- Özçelik B, Özbay B. Plastik Enjeksiyon Kalip Malzemelerinin Polipropilen Ürünün Mekanik Özeliklerine Etkisinin Taguchi Yöntemiyle Belirlenmesi. Sigma 29. 2011;289–300.
- Fu T, Haworth B, Mascia L. Analysis of process parameters related to the single-screw extrusion of recycled polypropylene blends by using design of experiments. J Plast Film Sheeting. 2017;33: 168–190.
- Ravi Kumar N, Srikant P, Ranga Rao CH, et al. Statistical analysis of mechanical properties of vakka fiber reinforced polypropylene composites using Taguchi method. Mater Today Proc. 2017;4: 3361–3370.
- Li T, Wang Z, Zhang H, et al. Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites. J Compos Mater. 2021;55: 1823–1834.
- Zhang B, Jia L, Tian M, et al. Surface and interface modification of aramid fiber and its reinforcement for polymer composites: a review. Eur Polym J. 2021;147: 110352.
- Huang BZ, Zhao LJ. Bridging and toughening of short fibers in SMC and parametric optimum. Compos Part B Eng. 2012;43: 3146–3152.
- Wang J, Fuentes CA, Zhang D, et al. Wettability of carbon fibres at micro- and mesoscales. Carbon N Y. 2017; 120: 438–446.
- Lu C, Wang J, Lu X, et al. Wettability and interfacial properties of carbon fiber and Ppoly(ether ether ketone) fiber hybrid composite. ACS Appl Mater Interfaces. 2019;11: 31520–31531.
- Carroy A, Druene L, Garinet M, et al. Hooked on plastics - How to get your UV coating to adhere. Paint Coatings Ind. 2006;22: 46–52.
- Surface treatments improve adhesion to composites | 2017-09-21 | Assembly Magazine | ASSEMBLY [Internet]. [cited 2023 Mar 16]. https://www.assemblymag.com/articles/93987-surface-treatments-improve-adhesion-to-composites
- Surface energy of plastics, https://www.tstar.com/blog/bid/33845/surface-energy-of-plastics [Accessed 16 March 2023].
- Technology: Silicone Adhesion & Bonding — News — Compo-SiL®, https://www.compo-sil.com/modules/news/article.php?storyid=57 [Accessed 16 March 2023].
- PP BondingļPTFE Gluing ļHDPEļLDPE bond ļ Polypropylene joining, https://elixir-india.net/blog/polyeolefin-bonding/ [Accessed 16 March 2023].
- Sekercioğlu T, Üniversitesi P, Fakültesi M, et al. Investigation of Surface Preparation Methods for Bonding of PlasticPlastikleriṅ Yapiştirilmasinda Yüzey HazirlamYöntemleriṅiİṅcelenmesi·. 2014;37–44.
- Biswas ma K, Shayed ma, Hund rd, et al. Surface modification of Twaron aramid fiber by the atmospheric air plasma technique. Text Res J. 2013; 83: 406–417.
- Yuan H, Wang W, Yang D, et al. Hydrophilicity modification of aramid fiber using a linear shape plasma excited by nanosecond pulse. Surf Coatings Technol. 2018;344: 614–620.
- Karahan M, Karahan N. Influence of weaving structure and hybridization on the tensile properties of woven carbon-epoxy composites. J Reinf Plast Compos. 2014;33: 212–222.
- Wang C, Li KZ, Li HJ, et al. Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based composites. Mater Sci Eng A. 2008;487: 52–57.
- Bingöl M, Çavdar K. Effects of different reinforcements for improving mechanical properties of composite materials. Uludağ Univ J Fac Eng. 2016;21: 123.
- Wang Y, Hansen CJ, Wu CC, et al. Effect of surface wettability on the interfacial adhesion of a thermosetting elastomer on glass. RSC Adv. 2021;11: 31142–31151.
- Ari A, Bayram A, Karahan M, et al. Comparison of the mechanical properties of chopped glass, carbon, and aramid fiber reinforced polypropylene. Polym Polym Compos. 2022;30: 096739112210985. https://doi.org/10.1177/09673911221098570
- Karahan M, Gul H, Karahan N, et al. Static behavior of three-dimensional Integrated core sandwich composites subjected to three-point bending. J Reinf Plast Compos. 2013;32: 664–678.
- Laura DM, Keskkula H, Barlow JW, et al. Effect of glass fiber and maleated ethylene-propylene rubber content on tensile and impact properties of Nylon 6. Polymer (Guildf). 2000;41: 7165–7174.
- Guo Q, Xiao B, Ohsawa I, et al. Fracture mechanism characteristics of ultra-thin chopped carbon fiber tape-reinforced thermoplastics hat-shaped hollow beam under transverse static and impact loadings. Carbon Lett. 2020;30: 271–280.
- Dorigato A, Fambri L. Effect of aramid regenerated fibers on thermo-mechanical behaviour of polyamide 12 composites. J Reinf Plast Compos. 2013;32: 1243–1256.
- Karahan M, Karahan N. Effect of weaving structure and hybridization on the low-velocity impact behavior of woven carbon-epoxy composites. Fibres Text East Eur. 2014;105: 109–115.
- Suresha B, Ravi Kumar BN, Venkataramareddy M, et al. Role of micro/nano fillers on mechanical and tribological properties of polyamide66/polypropylene composites. Mater Des. 2010;31: 1993–2000.
- Abasi FO, Aabass RU. Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber. MATEC Web Conf. 2018;225: 1–8.
- Andó M, Kalácska G, Czigány T. Shore D Hardness of Cast PA6 Based Composites. 2009;XXIII: 15–19.
- Hu C, Liao X, Qin QH, et al. The fabrication and characterization of high density polyethylene composites reinforced by carbon nanotube coated carbon fibers. Compos Part A Appl Sci Manuf. 2019;121: 149–156.
- Ari A, Bayram A. High-pressure resistant aramid fiber reinforced polymer matrix composite pipe design. Hacettepe Journal of Biology and Chemistry. 2022; 50(3): 301–312. https://doi.org/10.15671/hjbc.1024810
- Somashekhar S, Shanthakumar GC, Nagamadhu M. Influence of fiber content and screw speed on the mechanical characterization of jute fiber reinforced polypropylene composite using Taguchi method. Mater Today Proc. 2019;24: 2366–2374.
- Manikandan A, Rajkumar R. Evaluation of mechanical properties of synthetic fiber reinforced polymer composites by mixture design analysis. Polym Polym Compos. 2016;24: 455–462.
- Junaedi H, Baig M, Dawood A, et al. Modeling analysis of the tensile strength of polypropylene base short carbon fiber reinforced composites. J Mater Res Technol. 2021;11: 1611–1621.
- Ari A, Bayram A, Karahan M, et al. Evaluation of the mechanical properties of chopped carbon fibre reinforced polypropylene, polyethylene, polyamide 6, and polyamide 12 composites, In: Industria Textila, 2023; 74(2): 175–183. http://doi.org/10.35530/IT.074.02.202214
Language: English
Page range: 161 - 176
Submitted on: Jan 13, 2023
Accepted on: May 5, 2023
Published on: Aug 14, 2023
Published by: Sciendo
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Related subjects:
© 2023 Ali Arı, Ali Bayram, Mehmet Karahan, Orhun Arslan, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.