Comparison of spinning trajectory designing methods for products with noncircular cross-section
References
- Runge M. Spinning and flow forming: spinning and flow forming technology, product design, equipment, control systems. Radevormwald: Lippert Druck GmbH; 1993.
- Grainger JA. The flow turning of metals. Eastbourne and London: The Machinery Publishing Co. Ltd.; 1969.
- Meshcherin VT. Listovaya Shtampovka. Moskva: Mashinostroyenie; 1975.
- Arai H. Force-controlled metal spinning machine using linear motors. Proc IEEE Int Conf Robot Autom. 2006;2006:4031–6.
https://doi.org/10.1109/ROBOT.2006.1642321 . - Shimizu I. Asymmetric forming of aluminum sheets by synchronous spinning. J Mater Process Technol. 2010;210:585–92.
https://doi.org/10.1016/j.jmatprotec.2009.11.002 . - Jia Z, Han Z, Liu B, Xiao Y. Work hardening of non-axisymmetric die-less spinning. J Mech Eng. 2017;63:111–8.
https://doi.org/10.5545/sv-jme.2016.3589 . - Jia Z, Han ZR, Liu BM, Fan ZJ. Numerical simulation and experimental study on the non-axisymmetric die-less shear spinning. Int J Adv Manuf Technol. 2017;92:497–504.
https://doi.org/10.1007/s00170-017-0172-x . - Awiszus B, Härtel S. Numerical simulation of non-circular spinning: a rotationally non-symmetric spinning process. Prod Eng. 2011;5:605–12.
https://doi.org/10.1007/s11740-011-0335-9 . - Sugita Y, Arai H. Formability in synchronous multipass spinning using simple pass set. J Mater Process Technol. 2015;217:336–44.
https://doi.org/10.1016/j.jmatprotec.2014.11.017 . - Polyblank JA, Allwood JM. Parametric toolpath design in metal spinning. CIRP Ann Manuf Technol. 2015;64:301–4.
https://doi.org/10.1016/j.cirp.2015.04.077 . - Arai H, Gondo S. Oblique/curved tube necking formed by synchronous multipass spinning. Metals. 2020;10:733.
https://doi.org/10.3390/met10060733 . - Loukaides EG, Russo IM. Toolpath generation for asymmetric mandrel-free spinning. Procedia Eng. 2017;207:1707–12.
https://doi.org/10.1016/j.proeng.2017.10.926 . - Rentsch B, Manopulo N, Hora P. Numerical modelling, validation and analysis of multi-pass sheet metal spinning processes. Int J Mater Form. 2017;10:641–51.
https://doi.org/10.1007/s12289-016-1308-5 . - Yaman K, Özcan M, Tekiner Z. Determination of the spinning parameters of AISI 304L stainless steel by using finite element method. J Fac Eng Archit Gazi Univ. 2018;33:299–311.
https://doi.org/10.17341/gazimmfd.406802 . - Sedighi M, Jalili I, Kasaeian-Naeini M. Experimental study and FEM analysis of forward hot dieless spinning. Mechanics and Industry 2018;19.
https://doi.org/10.1051/MECA/2018034 . - Music O, Allwood JM, Kawai K. A review of the mechanics of metal spinning. J Mater Process Technol. 2010;210:3–23.
https://doi.org/10.1016/J.JMATPROTEC.2009.08.021 . - Wang Q, Wang T, Wang ZR. A study of the working force in conventional spinning. In: Proceedings of the Fourth International Conference of Rotary Forming, 1989, pp. 103–8.
- Kim JH, Park JH, Kim C. A study on the mechanics of shear spinning of cones. J Mech Sci Technol. 2006;20:806–18.
https://doi.org/10.1007/BF02915944 . - Hayama M, Murota T, Kudo H. Deformation modes and wrinkling of flange on shear spinning. Bull Japan Soc Mech Eng. 1966;9:423–33.
https://doi.org/10.1299/JSME1958.9.423 . - Quigley E, Monaghan J. Metal forming: an analysis of spinning processes. J Mater Process Technol. 2000;103:114–9.
https://doi.org/10.1016/S0924-0136(00)00394-0 . - Alberti N, Cannizzaro L, Lo Valvo E, Micari F. Analysis of metal spinning processes by the ADINA code. Comput Struct. 1989;32:517–25.
https://doi.org/10.1016/0045-7949(89)90343-X . - Lu XY, Zhang S, Hou H, Li JZ, Zhou LX, Li ZQ. Three dimensional fe analysis on flange bending for TC4 alloy during shear spinning. J Mater Sci Technol. 2006;22:855–9.
- Zhan M, Yang H, Zhang JH, Xu YL, Ma F. 3D FEM analysis of influence of roller feed rate on forming force and quality of cone spinning. J Mater Process Technol. 2007;187–188:486–91.
https://doi.org/10.1016/j.jmatprotec.2006.11.114 . - Xia QX, Lai ZY, Long H, Cheng XQ. A study of the spinning force of hollow parts with triangular cross sections. Int J Adv Manuf Technol. 2013;68:2461–70.
https://doi.org/10.1007/s00170-013-4847-7 .
Language: English
Page range: 116 - 129
Submitted on: Feb 11, 2022
Accepted on: May 20, 2022
Published on: Jul 13, 2022
Published by: Sciendo
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Related subjects:
© 2022 Marcin Majewski, Tomasz Gądek, Leszek Klimek, Łukasz Nowacki, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.