The preparation of CNT/PMMA composite film on SiO2 substrates

Li, Jian

doi:10.2478/msp-2022-0001

Abstract

Microelectromechanical system (MEMS) has been highly valued since the size of the MEMS structure is miniaturized, the spacing between the components is in the nanometer range, and the behaviors of friction and adhesion greatly affect the reliability of MEMS. An atomic force microscope (AFM) was used to observe the surface morphology of carbon nanotube (CNT)/polymethyl methacrylate (PMMA) film, and X-ray photoelectron spectroscopy (XPS) was used to analyze the chemical state of typical elements on the surface of the film. The friction and wear properties of composite nano-films under macroscopic conditions were systematically studied. The research results show that the composite nano-film has excellent anti-friction and anti-wear properties.

References

Budde CF, Riedel SL, Willis LB, Rha C, Sinskey AJ. Production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from plant oil by engineered Ralstonia eutropha strains. Appl Environ Microbiol. 2011;77(9):2847–54.
Search in Google Scholar Back to article
Deitzel JM, Kleinmeyer J, Harris D, Beck Tan NC. The effect of processing variables on the morphology of electrospun nanofibers and textiles. Polymer. 2001;42(1):261–72.
Search in Google Scholar Back to article
Huang Z-M, Zhang Y-Z, Kotaki M, Ramakrishna S. A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos Sci Technol. 2003;63(15):2223–53.
Search in Google Scholar Back to article
Lee KH, Kim HY, Bang HJ, et al. The change of bead morphology formed on electrospun polysterene fibers. Polymer. 2003;44(14):4029–34.
Search in Google Scholar Back to article
Baidurah S, Murugan P, Joyyi L, Fukuda J, Yamada M, Sudesh K, et al. Validation of thermally assisted hydrolysis and methylation-gas chromatography for rapid and direct compositional analysis of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) in whole bacterial cells. J Chromatogr A. 2016;1471:186–91.
Search in Google Scholar Back to article
Bunker A, Magarkar A, Viitala T. Rational design of liposomal drug delivery systems, a review: combined experimental and computational studies of lipid membranes, liposomes and their PEGylation. Biochim Biophys Acta. 2016;1858(10):2334–52.
Search in Google Scholar Back to article
Han FY, Thurecht KJ, Whittaker AK, Smith MT. Bioerodable PLGA-based microparticles for producing sustained-release drug formulations and strategies for improving drug loading. Front Pharmacol 2016;7:185.
Search in Google Scholar Back to article
Noh S-H, Moon SH, Shin T-H, Lim Y, Cheon J. Recent advances of magneto-thermal capabilities of nanoparticles: From design principles to biomedical applications. Nano Today. 2017;13:61–76.
Search in Google Scholar Back to article
Golovin YI, Klyachko NL, Majouga AG, Sokolsky M, Kabanov AV. Theranostic multimodal potential of magnetic nanoparticles actuated by non-heating low frequency magnetic field in the new-generation nanomedicine. J Nanopart Res. 2017;19(2):63.
Search in Google Scholar Back to article
Chen X, Tan L, Liu T, Meng X. Micro-nanomaterials for tumor microwave hyperthermia design preparation, and application. Curr Drug Deliv. 2017;14(3):307–22.
Search in Google Scholar Back to article
Dang J, He H, Chen D, Yin L. Manipulating tumor hypoxia toward enhanced photodynamic therapy (PDT). Biomater Sci. 2017;5(8):1500–11.
Search in Google Scholar Back to article
Lin G-M, Xie G-Y, Sui G-X, Yang R. Hybrid effect of nanoparticles with carbon fibers on the mechanical and wear properties of polymer composites. Comp Part B Eng. 2012;43(1):44–9.
Search in Google Scholar Back to article
Davis DC, Wilkerson J, Zhu J, Ayewah D. Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology, Comp Struct. 2010;92(11):2653–62.
Search in Google Scholar Back to article
Bortz DR, Merino C, Martin-Gullon I. Mechanical characterization of hierarchical carbon fiber/nanofiber composite laminates. Comp Part A Appl Sci Manufact. 2011;42(11):1584–91.
Search in Google Scholar Back to article
Zhou Y, White E, Hosur M, Jeelani S. Effect of particle size and weight fraction on the flexural strength and failure mode of TiO2 particles reinforced epoxy. Mater Lett. 2010;64(7):806–9.
Search in Google Scholar Back to article
Soni G, Srivastava S, Soni P, Kalotra P, Vijay YK. Mater Res Express 2018;5:015302.
Search in Google Scholar Back to article

The preparation of CNT/PMMA composite film on SiO2 substrates

Abstract

Paradigm

My account