References
- Tasak E, Ziewiec A. Spawalność materiałów konstrukcyjnych. Kraków: Wydawnictwo JAK; 2009.
- Nowacki J. Spawalność stali dupleks. Przegląd Spawalnictwa. 2008;10:34–44.
- Dienstleitungen und Veranstaltungen. GSI-SLV Muenchen; 2016.
- Expertenwissen: Flammrichten (online access:
https://docplayer.org/113108652-Expertenwissen-flammstrahlen-flammstrahlen-flammrichten-lichtbogen-handschweissen-duplex-stahl-plasmaschneiden.html , 14.12.2021). - Xavier CR, Delgado HG Jr, de Castro JA. An experimental and numerical approach for the welding effects on the Duplex stainless steel microstructure. Mater Res. 2015;18(3):489–502. (doi.org/10.1590/1516-1439.302014)
- BOC. Fundamentals of flame straightening, Technical information for flame processes. Catalog available at:
https://www.boconline.co.uk/en/images/Fundamentals-of-Flame-Straightening_tcm410-113398.pdf . Accessed 15 May 2019. - Topolska S, Łabanowski J. Impact-toughness investigations of duplex stainless steels. Materiali in tehnologije/Mater Technol. 2015;49(4):481–6.
- Klimpel A. Wpływ pierwiastków stopowych na tworzenie się fazy sigma w stopiwach austenityczno-ferrytycznych typu 18-8. Zeszyty naukowe Politechniki Śląskiej, No. 509.
- Słania J. Elimination of welding distortions. Przegląd Spawalnictwa/Welding Technology Review p. 36–40, 2012;2.
- Ch. Bohlen. Flammrichten von Duplexstahl X2 CrNiMoN2253, Der Praktiker. Schweißen und Schneiden 1991;43(1):4–5.
- van Nassau L, Meelker H, Neessen F, Hilkes J. Welding duplex and superduplex stainless steel, An update of the guide for industry.(access online:
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwj21qKhkOP0AhVho4sKHfdHA44QFnoECAgQAQ&url=http%3A%2F%2Flasgroepregionoord.be%2Fwordpress%2Fwp-content%2Fuploads%2F2017%2F07%2F003-Update-guide-Welding-duplex-and-superduplex-stainless-steel.pdf&usg=AOvVaw1DXWs1sBtr8up25tY32H5q ) - Łabanowski J, Świerczyńska A, Topolska S. Effect of microstructure on mechanical properties and corrosion resistance of 2205 duplex stainless steel. Pol Marit Res. 2014;21(4(84)):108–12. (doi.org/10.2478/pomr-2014-0047)
- Topolska S, Łabanowski J. Effect of microstructure on impact toughness of duplex and superduplex stainless steels. J Achiev Mater Manuf Eng. 2009;36(2):142–9.
- Golański G, Lachowicz MM. Failure cause analysis for the suspension element of boiler superheater. Eng Fail Anal. 2019;105:490–5. (10.1016/j.engfailanal.2019.07.024)
- Garin JL, Mannheim RL. Sigma-phase precipitation upon industrial-like heating of cast heat-resistant steels. J Mater Process Technol. 2009;209:3143–8. (doi.org/10.1016/j.jmatprotec.2008.07.026)
- Biezma MV, Martin U, Linhardt P, Ress J, Rodríguez C, Bastidas MD. Non-destructive techniques for the detection of sigma phase in duplex stainless steel: a comprehensive review. Eng Fail Anal. 2021;122. p.1–36. (doi.org/10.1016/j.engfailanal.2021.105227)
- Llorca-Isern N, López-Luque H, López-Jiménez I, Biezma MV. Identification of sigma and chi phases in duplex stainless steels. Mater Charact. 2016;112, p. 20–29.. (doi.org/10.1016/j.matchar.2015.12.004)
- Silva EM, Fialho WML, Silva HFBM, Leite JP, Oliveira AVG. Sigma phase detection in duplex stainless steel by induced magnetic field. J Phys Conf Ser. 2015;733, p. 1–6 (doi.org/10.1088/1742-6596/733/1/012070)