Finite element modeling of continuous drive friction welding of Al6061 alloy
References
- Sahin M. Joining of aluminium and copper materials with friction welding, Int J Adv Manuf Technol. 2010;49(5–8):527–34.
https://doi.org/10.1007/s00170-009-2443-7 . - Yilbas BS, Sahin AZ, Coban A, Abdul Aleem BJ. Investigation into the properties of friction-welded aluminium bars, J Mater Process Technol. 1995;54(1–4):76–81.
https://doi.org/10.1016/0924-0136(95)01923-5 . - Yang YC, Chen WL, Lee HL. A Nonlinear Inverse Problem in Estimating the Heat Generation in Rotary Friction Welding, Numer Heat Transf A. 2011;59(2):130–49.
https://doi.org/10.1080/10407782.2011.540965 . - Schmicker D, Persson P, Strackeljan J. Implicit Geometry Meshing for the simulation of Rotary Friction Welding, J Comput Phys. 2014;270:478–89.
https://doi.org/10.1016/j.jcp.2014.04.014 . - Li W, Wang F. Modeling of continuous drive friction Welding of mild steel, Mater Sci Eng A. 2011;528(18):5921–6.
https://doi.org/10.1016/j.msea.2011.04.001 . - Kalsi NS, Sharma VS. A statistical analysis of rotary friction welding of steel with varying carbon in work-pieces, Int J Adv Manuf Technol. 2011;57(9–12):957–67.
https://doi.org/10.1007/s00170-011-3361-z . - Nguyen TC, Weckman DC. A thermal and microstructure evolution model of direct-drive friction welding of plain carbon steel, Metall Mater Trans, B, Process Metall Mater Proc Sci. 2006;37(2):275–92.
https://doi.org/10.1007/BF02693157 . - Maalekian M, Kozeschnik E, Brantner HP, Cerjak H. Comparative analysis of heat generation in friction welding of steel bars, Acta Mater. 2008;56(12):2843–55.
https://doi.org/10.1016/j.actamat.2008.02.016 . - Maalekian M, Cerjak H. Thermal-Phase Transformation Modelling and Neural Network Analysis of Friction Welding of Non-Circular Eutectoid Steel Components, Welding in the World 53 (2009) R44–R51.
https://doi.org/10.1007/BF03266702 . - Can A., Sahin M., and Kucuk M. Modeling of Friction Welding, in: International Science Conference, 2010, II:135–142.
- Maalekian M. Friction welding critical assessment of literature, Sci Technol Weld Join. 2007;12(8):738–59.
https://doi.org/10.1179/174329307X249333 . - Özdemir N. Investigation of the mechanical properties of friction-welded joints between AISI 304L and AISI 4340 steel as a function rotational speed, Mater Lett. 2005;59(19–20):2504–9.
https://doi.org/10.1016/j.matlet.2005.03.034 . - Özdemir N., Sarsılmaz F., Hasçalık A. Effect of rotational speed on the interface properties of friction-welded AISI 304L to 4340 steel, Mater Des. 2007;28(1):301–7.
https://doi.org/10.1016/j.matdes.2005.06.011 . - Bouarroudj E, Chikh S, Abdi S, Miroud D. Thermal analysis during a rotational friction welding, Appl Therm Eng. 2017;110:1543–53.
https://doi.org/10.1016/j.applthermaleng.2016.09.067 . - Dawood A, Butt S, Hussain G, Siddiqui M, Maqsood A, Zhang F. Thermal Model of Rotary Friction Welding for Similar and Dissimilar Metals, Metals (Basel) 2017;7(6):224.
https://doi.org/10.3390/met7060224 . - Juan J. Valencia and Peter N. Quested Thermophysical Properties, in: ASM Handbook, Volume 15. ASM International; 2008. pp. 468–81.
- Brandt R, Neuer G., Electrical Resistivity and Thermal Conductivity of Pure Aluminum and Aluminum Alloys up to and above the Melting Temperature, Int J Thermophys. 2007;28(5):1429–46.
https://doi.org/10.1007/s10765-006-0144-0 . - Leitner M, Leitner T, Schmon A, Aziz K, Pottlacher G. Thermophysical Properties of Liquid Aluminum, Metal-lurgical and Materials Transactions A.
https://doi.org/10.1007/s11661-017-4053-6 .
Language: English
Page range: 1 - 14
Submitted on: Jan 26, 2021
Accepted on: Feb 21, 2021
Published on: May 30, 2021
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2021 Mohammed A. Tashkandi, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.