Investigation of RC Beams Rehabilitated with Angle-Ply Composite Laminate Plate

Kamel Antar; Khaled Amara; Fatima Zohra Djidar

doi:10.2478/mmce-2021-0007

Abstract

This parametric study investigates the RC Beams Rehabilitated with angle-ply composite laminate plate [θn/90m]_s. This work is based on a simple theoretical model to estimate the interfacial stresses developed between the concrete beam and the composite with taking into account the hygrothermal effect. Fibre orientation angle, effects of number of 90° layers and effects of plate thickness and length on the distributions of interfacial stress in the concrete beams reinforced with composite plates have also been studied.

References

[1] Tounsi A, Benyoucef S., Int. J. Adhes. Adhes., (2007), 27: 207–215, doi:10.1016/j.ijadhadh.2006.01.00910.1016/j.ijadhadh.2006.01.009
Search in Google Scholar Back to article
[2] Tounsi A., Int. J. Solids. Struct., (2006), 43: 4154–4174, doi: 10.1016/j.ijsolstr.2005.03.07410.1016/j.ijsolstr.2005.03.074
Search in Google Scholar Back to article
[3] Benyoucef S, Tounsi A, Meftah S A and Adda Bedia EA., Compos. Interfaces., (2006), 13(7): 561–571, doi: 10.1163/15685540677844075810.1163/156855406778440758
Search in Google Scholar Back to article
[4] Vilnay O., Int. J. Cem. Compos. Light. Weight. Concr., (1988), 10 (2): 73–78, doi: 10.1016/0262-5075(88)90033-410.1016/0262-5075(88)90033-4
Search in Google Scholar Back to article
[5] Roberts TM., (1989). Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams. Struct. Eng. 1989, 67 (12): 229–233.
Search in Google Scholar Back to article
[6] Roberts TM, and Haji-Kazemi H. (1989). Theoretical study of the behavior of reinforced concrete beams strengthened by externally bonded steel plates. Proc. Inst. Civil. Eng., 87(2): 39–55
Search in Google Scholar Back to article
[7] Malek AM, Saadatmanesh H, and Ehsani MR.(1994). Prediction of failure load of RC beams strengthened with FRP plate due to stress concentration at the plate end. ACI. Struct. Journal., 95(1):142–152
Search in Google Scholar Back to article
[8] Robinovitch O. and Frostig Y., (200). Closed-form higher-order analysis of beams strengthened with FRP strips. J. Compos. Constr-ASCE, 4(2): 65–7410.1061/(ASCE)1090-0268(2000)4:2(65)
Search in Google Scholar Back to article
[9] Ye JQ. Cem. Concr. Compos. (2001). 23(4–5), 411–417, doi:10.1016/S0958-9465(01)00015-410.1016/S0958-9465(01)00015-4
Search in Google Scholar Back to article
[10] Smith ST., and Teng JG., Eng. Struct. (2001). 23(7), 857–871, doi: 10.1016/S0141-0296(00)00090-010.1016/S0141-0296(00)00090-0
Search in Google Scholar Back to article
[11] Barnes RA., and Mays GC., Int. J. Adhes. (2001). 21, 495–502, doi: 10.1016/S0143-7496(01)00031-810.1016/S0143-7496(01)00031-8
Search in Google Scholar Back to article
[12] Stratford T., and Cadei J., Constr. Build. Mater. (2006). 20, 34–45, doi: 10.1016/j.conbuildmat.2005.06.04110.1016/j.conbuildmat.2005.06.041
Search in Google Scholar Back to article
[13] Bouazaoui Li A., Int. J. Adhes. (2008). 28, 101–108, doi: 10.1016/j.ijadhadh.2007.02.00610.1016/j.ijadhadh.2007.02.006
Search in Google Scholar Back to article
[14] Taljsten B., J. Mater. Civil. Eng. ASCE. (1997). 9(4), 206–12, doi: 10.1061/(ASCE)0899-1561(1997)9:4(206)10.1061/(ASCE)0899-1561(1997)9:4(206)
Search in Google Scholar Back to article
[15] Smith ST., and Teng JG., Eng. Struct. (2002). 24(4), 385–395, doi: 10.1016/S0141-0296(01)00105-510.1016/S0141-0296(01)00105-5
Search in Google Scholar Back to article
[16] Smith ST., and Teng JG., Eng. Struct. (2002). 24(4), 397–417, doi: 10.1016/S0141-0296(01)00106-710.1016/S0141-0296(01)00106-7
Search in Google Scholar Back to article
[17] Denton SN, (2001). Analysis of stresses developed in FRP plated beams due to thermal effects. FRP. Compos. In. civil. Eng., 527–536
Search in Google Scholar Back to article
[18] Smith ST., Teng JG., Eng Struct. (2001). 23(7), 857–871, doi: 10.1016/S0141-0296(00)00090-010.1016/S0141-0296(00)00090-0
Search in Google Scholar Back to article
[19] Robinovitch O, and Frostig Y. (2001). Nonlinear higher-order analysis of cracked RCbeams strengthened with FRP strips. J. Struct. Eng- ASCE. 127(4): 381–389
Search in Google Scholar Back to article
[20] Shen HS., Teng JG., and Yang J., J. Eng. Mech. ASCE (2001). 127(4), 399–406, doi: 10.1061/(ASCE)0733-9399(2001)127:4(399)10.1061/(ASCE)0733-9399(2001)127:4(399)
Search in Google Scholar Back to article
[21] Hassaine Daouadji T. Advan. Comput. Design. (2017). 2(1), 57-69, doi: 10.12989/acd.2017.2.1.05710.12989/acd.2017.2.1.057
Search in Google Scholar Back to article
[22] Bouakaz K, Hassaine Daouadji T, Meftah SA, Ameur M, and Adda Bedia EA (2014). A numerical analysis of steel beams strengthened with composite materials. Mech. Compos. Mater. 50(4): 685-69610.1007/s11029-014-9435-x
Search in Google Scholar Back to article
[23] Krour B, Bernard F, and Tounsi A. Eng. Struct. (2014). 56, 218-227, doi: 10.1016/j.engstruct.2013.05.00810.1016/j.engstruct.2013.05.008
Search in Google Scholar Back to article
[24] Touati M, Tounsi A, and Benguediab M. Comput. Concrete. (2015). 15(3), 141-166, doi: 10.12989/cac.2015.15.3.33710.12989/cac.2015.15.3.337
Search in Google Scholar Back to article
[25] Hadji L, Hassaine Daouadji T, Meziane AM, and Adda Bedia EA. Steel. Compos. Struct. Int. J. (2016). 20(2), 413-429, doi: 10.12989/scs.2016.20.2.41310.12989/scs.2016.20.2.413
Search in Google Scholar Back to article
[26] Kara IF. Struct. Eng. Mech. Int. J. (2016). 59(4), 775-793, doi: 10.12989/sem.2016.59.4.77510.12989/sem.2016.59.4.775
Search in Google Scholar Back to article
[27] Elamary AS, Abd-ELwahab RK. Struct. Eng. Mech. Int. J. (2016). 57(5), 937-949, doi: 10.12989/sem.2016.57.5.93710.12989/sem.2016.57.5.937
Search in Google Scholar Back to article
[28] Gibson R.F., (1994). Principles of composites material mechanics. McGraw-Hill Inc.
Search in Google Scholar Back to article
[29] Benkeddad. A, Grediac.M, Vautrin. A, (1995).On the transient hygroscopic stresses in laminated composite plates, composite Structures, Elsevier Applied Science, 30 (2), 201-20510.1016/0263-8223(94)00033-6
Search in Google Scholar Back to article
[30] Benkeddad. A, Grediac.M, Vautrin. A, (1996). Computation of transient hygroscopic stresses in laminated composite plates, Composites Science and Technology, 56, 869-87610.1016/0266-3538(96)00034-6
Search in Google Scholar Back to article
[31] Tounsi. A and Edda Bedia. E.A, (2003). Some observations on the evolution of transversal hygroscopic stresses in laminated composites plates: effect of anisotropy, Composite Structures, 59, 445-45410.1016/S0263-8223(02)00119-8
Search in Google Scholar Back to article
[32] Shen. C.H, (1981). Environmental effects in the elastic moduli of composite material. Environmental Effects on composite Materials, Springer. G. S, Ed, Technomic Publiching Company, 94-108.
Search in Google Scholar Back to article

Investigation of RC Beams Rehabilitated with Angle-Ply Composite Laminate Plate

Abstract

Paradigm

My account