Isothermal Mechanical Cycling of Saponite–Titanium Composites in Conditions of Complex Stressed State

Нuliieva, N.M.; Pasternak, V.V.

doi:10.2478/lpts-2022-0043

Abstract

It has been experimentally shown that in the isothermal mechanocycling of continuous cylindrical samples of saponite–titanium composites under conditions of a complex stress state, a reversible deformation of the properties of martensitic inelasticity is observed, which appears during thermal cycling at intervals of martensitic transformations.

According to the results of the experiment, the influence of the ratio between the static and cyclic components of the stress on the change of shear deformation in a complex stress state during mechanical cycling with axial load is estimated.

References

1. Yuan, H., Fauroux, J.–Ch., Chapelle, F., & Balandraud, X. (2017). A Review of Rotary Actuators Based on Shape Memory Alloys. Journal of Intelligent Material Systems and Structures, 28 (14), 1863–1885, DOI: org/10.1177/1045389X16682848
Open DOI Search in Google Scholar Back to article
2. Lavakumar, A. (2017). Mechanical Properties of Materials. Concepts in Physical Metallurgy, 4, 5–22. https://doi.org/10.1088/978-1-6817-4473-5ch510.1088/978-1-6817-4473-5ch5
Search in Google Scholar Back to article
3. Нuliieva, N. M., Somov, D. O., Pasternak, V. V., Samchuk L. M., & Chetverzhuk, T. I. (2020). The Selection of Boron Nitride Circles for Grinding Saponite – Titanium Composites Using Non-Parametric Method. Latvian Journal of Physics and Technical Sciences, 57 (6), 68–77. DOI: 10.2478/lpts-2020-0033
Open DOI Search in Google Scholar Back to article
4. Tahara, M., Kim, H. Yo., Hosoda, H., & Miyazaki, Sh. (2009). Shape Memory Effect and Cyclic Deformation Behavior of Ti–Nb–N Alloys. Functional Materials Letters, 2 (2), 79–82. DOI: org/10.1142/S1793604709000600
Open DOI Search in Google Scholar Back to article
5. Sun, Q., Cao, B., Iwamoto, T., & Suo, T. (2021). Effect of Impact Deformation on Shape Recovery Behavior in Fe-Mn-Si Shape Memory Alloy under Shape Memory Training Process with Cyclic Thermo-Mechanical Loading. Science China Technological Sciences. DOI: org/10.1007/s11431-020-1759-y
Open DOI Search in Google Scholar Back to article
6. Zabolotnyi, O., Pasternak, V., Ilchuk, N., Huliieva, N., & Cagáňová, D. (2021). Powder technology and software tools for microstructure control of AlCu₂ samples. In: Proceedings of the 4th Int. Conf. on Design, Simulation and Manufacturing: The Innovation Exchange, DSMIE-2021 (pp. 585–593), 8–11 June 2021. Lviv, Ukraine: Manufacturing and Materials Engineering: Springer.10.1007/978-3-030-77719-7_58
Search in Google Scholar Back to article
7. Ohki, T., Ni, Q.-Q., Ohsako, N., & Iwamoto, M. (2004). Mechanical and Shape Memory Behavior of Composites with Shape Memory Polymer. Composites Part A: Applied Science and Manufacturing, 35 (9), 1065–1073. DOI:org/10.1016/j.compositesa.2004.03.001
Open DOI Search in Google Scholar Back to article
8. Murasawa, G., Tohgo, K., & Ishii, H. (2004). Deformation Behavior of NiTi /Polymer Shape Memory Alloy Composites – Experimental Verifications. Journal of Composite Materials, 38 (5), 399–416. DOI: org/10.1177/0021998304040553
Open DOI Search in Google Scholar Back to article
9. Turov, V., Tryasuchev, L., Klochko, V., & Zvonytsky V. (2008). IPC Tensile Testing Device. N 33345. Database of Patents of Ukraine. Available at https://uapatents.com/3-33345-pristrijj-dlya-viprobuvannya-naroztyag-stisk.html
Search in Google Scholar Back to article
10. Sheldon, B.W., Rajamani, A., Bhandari, A., Chason, E., Hong, S.K., & Beresford, R. (2005). Competition between Tensile and Compressive Stress Mechanisms during Volmer-Weber Growth of Aluminum Nitride Films. Journal of Applied Physics, 98, 043509. DOI:org/10.1063/1.1994944
Open DOI Search in Google Scholar Back to article
11. Patent of Ukraine 91287, IPC B22F 3/23 (2006.01) C01G 1/00 (2014.01). Reactor for Self-propagating High-Temperature Synthesis (SHS process). L. Samchuk, N. Guliyeva, V. Rud, O. Povstyanoy, I. Savyuk, Yu. Vorobey, M. Zaikin. Lutsk National Technical University, Lutsk, 25.06.14, 12.
Search in Google Scholar Back to article
12. Rud, V., Samchuk, L., & Guliieva, N. (2014). Application of Pyrometric Technique for Imaging of Front SHS Burning. Bulletin of Vinnytsia Polytechnic Institute: Mechanical Engineering and Transport. Vinnitsa, 6, 97–101.
Search in Google Scholar Back to article
13. Shmyg, R., Boyarchuk, V., Dobryansky, I., Barabash V., & Schmig, R.A. (2010). Measurement Error. Terminological Dictionary-Reference Book on Construction and Architecture. Lviv, 159.
Search in Google Scholar Back to article
14. Standard. (2017). ISO 12106:2017. Metallic Materials. Fatigue Testing. Axial-Strain-Controlled Method, 38.
Search in Google Scholar Back to article
15. Anwar, N., & Najam, F. (2017). Chapter Three – Axial-Flexual Response of Cross-Sections. Structural Cross Sections Analysis and Design, 137–249.10.1016/B978-0-12-804443-8.00003-8
Search in Google Scholar Back to article
16. Huliieva, N. (2019). Exposure to Saponite-Titanium Composite with Subsequent Deformation of Intense Plastic Torsional Deformation. Abstracts of the VI Scientific Conference Nanoscale Systems: Structure, Properties, Technologies (pp. 3–6), Kyiv: NANSIS 2019.
Search in Google Scholar Back to article
17. Нuliieva, N., Pasternak, V., & Samchuk, L. (2020). Application of deep sanding method of saponite – titanium blanks. In: VI International Scientific and Practical Conference Scientific Achievements of Modern Society (p. 119), 5–7 February 2020. Liverpool: UK.
Search in Google Scholar Back to article
18. Sheremetyev, V., Prokoshkin, S., Brailovski, V., & Dubinskiy, S. (2015). Investigation of the Structure Stability and Superelastic Behavior of Thermomechanically Treated Ti-Nb-Zr and Ti-Nb-Ta Shape-Memory Alloys. The Physics of Metals and Metallography, 116 (4), 413–422. DOI: 10.1134/S0031918X15040158
Open DOI Search in Google Scholar Back to article
19. Ropyak, L., & Velichkovych, A. (2016). Investigation of the Stress State of a Multifunctional Coating during Stretching or Torsion. Kyiv: KPI them. Igor Sikorsky, 194–196.
Search in Google Scholar Back to article
20. Gomatam, R., & Sancaktar, E. (2006). The Effects of Stress State, Loading Frequency and Cyclic Waveforms on the Fatigue Behavior of Silver-Filled Electronically-Conductive Adhesive Joints. January Journal of Adhesion Science and Technology, 20 (1), 53–68. DOI: 10.1163/156856106775212378.
Open DOI Search in Google Scholar Back to article
21. Ma, Z., Zhao, H., & Liu, Ch. (2021). Prediction Method of Low Cyclic Stress-Strain Curve of Structural Materials. Materials Transactions, 56 (7), 1067–1071. DOI: 10.2320/matertrans. M2015085]
Open DOI Search in Google Scholar Back to article
22. Gooch, Ja. (2011). Cyclic Stress Strain. Encyclopedic Dictionary of Polymers, 189–189. DOI: 10.1007/978-1-4419-6247-8_3235
Open DOI Search in Google Scholar Back to article
23. Kelly, Ja. (2017). Shear Deformation and the Buckling of Columns, Revisited. Civil Eng Res J. 2 (1), 555579. DOI: 10.19080/CERJ.2017.02.555579
Open DOI Search in Google Scholar Back to article
24. Herrmann, H., & Bucksch, H. (1991). Shear deformation. Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik, 2633–3379. Springer, Berlin, Heidelberg. DOI: 10.1007/978-3-642-41714-6_192792
Open DOI Search in Google Scholar Back to article
25. Bhaskar, K., & Varadan, T. (2021). Shear Deformation Theories (pp. 181–195). In: Plates. Springer, Cham. DOI: org/10.1007/978-3-030-69424-1_11
Open DOI Search in Google Scholar Back to article
26. Casati, R., Vedani, M., & Tuissi A. (2014). Thermal Cycling of Stress-Induced Martensite for High-Performance Shape Memory Effect. Scripta Materialia, 80, 13–16. DOI: 10.1016/j. scriptamat.2014.02.003
Open DOI Search in Google Scholar Back to article
27. Lázpita, P., Villa, E., Villa, F., & Chernenko, V. (2021). Temperature Dependent Stress–Strain Behavior and Martensite Stabilization in Magnetic Shape Memory Ni_51.1Fe_16.4Ga_26.3Co_6.2. Single Crystal Metals, 11, 920. DOI: org/10.3390/met11060920
Open DOI Search in Google Scholar Back to article
28. Müllner, P., Chernenko, V., & Kostorz, G. (2004). Large Cyclic Magnetic-Field-Induced Deformation in Orthorhombic (14M) Ni–Mn– Ga Martensite. J. Appl. Phys, 95, 1531–1536.10.1063/1.1639144
Search in Google Scholar Back to article
29. Pagounis, E., & Muellner, P. (2018). Materials and actuator solutions for advanced magnetic shape memory devices. In: Proceedings of the ACTUATOR 2018, 16th International Conference on New Actuators (pp. 1–7), 25–27 June 2018. Bremen, Germany.
Search in Google Scholar Back to article
30. Kustov, S., Pons, J., Cesari, E., & Van Humbeeck, J. (2004). Chemical and Mechanical Stabilization of Martensite. Acta Mater, 52, 4547–4559.10.1016/j.actamat.2004.06.012
Search in Google Scholar Back to article
31. Samy, N., Daróczi, L., Tóth, L., Panchenko, E., Chumlyakov, Y., Surikov, N., & Beke, D. (2020). Effect of Stress-Induced Martensite Stabilization on Acoustic Emission Characteristics and the Entropy of Martensitic Transformation in Shape Memory Ni₅₁Fe₁₈Ga₂₇Co₄ Single Crystal. Metals, 10, 534.10.3390/met10040534
Search in Google Scholar Back to article
32. Roytburd, A. (2000). Intrinsic Hysteresis of Superelastic Deformation. Mater. Sci. Forum, 389–392.10.4028/www.scientific.net/MSF.327-328.389
Search in Google Scholar Back to article

Isothermal Mechanical Cycling of Saponite–Titanium Composites in Conditions of Complex Stressed State

Abstract

Paradigm

My account