Re-Use and Recycling of Different Electrical Machines

A. Rassõlkin; A. Kallaste; S. Orlova; L. Gevorkov; T. Vaimann; A. Belahcen

doi:10.2478/lpts-2018-0025

.blurhash-client-img { display: none !important; }

Re-Use and Recycling of Different Electrical Machines

Latvian Journal of Physics and Technical Sciences

Volume 55 (2018): Issue 4 (August 2018)

By: A. Rassõlkin, A. Kallaste, S. Orlova, L. Gevorkov, T. Vaimann and A. Belahcen

Open Access

|Sep 2018

Abstract

The paper discusses the current developments in the recycling of electrical machines. The main attention is devoted to three types of motors: synchronous reluctance motor, permanent magnet assisted synchronous reluctance motor, and induction motor. Base materials of such electrical machines are also described in the paper. Rare-earth permanent magnets used in electrical machines are review separately. Moreover, the paper considers the features of the disassembly and recycling options.

References

1. EU institutions. (2009). Environment – European Commission.
Search in Google Scholar Back to article
2. Harris, A. (2006).ORGALIME guide to the scope of the WEEE and RoHS directives. Bruxelles.
Search in Google Scholar Back to article
3. International Energy Agency. (2016). World Energy Outlook 2016. Available at https://www.iea.org/newsroom/news/2016/november/world-energy-outlook-2016.html
Search in Google Scholar Back to article
4. Waide, P., & Brunner, C. U. (2011). Energy-efficiency policy opportunities for electric motor-driven systems. Energy Efficiency Series.
Search in Google Scholar Back to article
5. IEC 60034-30-1:2014. (2014). Rotating electrical machines – Part 30-1: Efficiency classes of line operated AC motors (IE code).
Search in Google Scholar Back to article
6. Rassõlkin, A., Orlova, S., Vaimann, T., Belahcen, A., & Kallaste, A. (2016). Environmental and life cycle cost analysis of a synchronous reluctance machine. In 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON) (pp. 1–5) 13 – 14 October 2016, Riga.10.1109/RTUCON.2016.7763127
Search in Google Scholar Back to article
7. Orlova, S., Rassõlkin, A., Kallaste, A., Vaimann, T., & Belahcen, A. (2016). Lifecycle analysis of different motors from the standpoint of environmental impact. Latv. J. Phys. Tech. Sci., 53(6), 37–46.10.1515/lpts-2016-0042
Search in Google Scholar Back to article
8. Mahajan, S. (2001). Encyclopedia of materials: Science and technology. Elsevier.
Search in Google Scholar Back to article
9. Shokrollahi, H., & Janghorban, K. (2007). Soft magnetic composite materials (SMCs). J. Mater. Process. Technol., 189(1), 1–12.10.1016/j.jmatprotec.2007.02.034
Search in Google Scholar Back to article
10. Alatalo, M., Lundmark, S. T., & Grunditz, E. A. (2011). Electric machine design for traction applications considering recycling aspects-review and new solution. In IECON 2011 – 37th Annual Conference of the IEEE Industrial Electronics Society (pp. 1836–1841), 7–10 November 2011, Melbourne, Australia.10.1109/IECON.2011.6119585
Search in Google Scholar Back to article
11. Pellegrino, G., Jahns, T. M., Bianchi, N., Soong, W., & Cupertino, F. (2016). The rediscovery of synchronous reluctance and ferrite permanent magnet motors. Cham: Springer International Publishing.10.1007/978-3-319-32202-5
Search in Google Scholar Back to article
12. Karlsson, B., & Järrhed, J.-O. (2000). Recycling of electrical motors by automatic disassembly. Meas. Sci. Technol., 11(4), 350–357.10.1088/0957-0233/11/4/303
Search in Google Scholar Back to article
13. Lundmark, S. T., & Alatalo, M. (2013). A segmented claw-pole motor for traction applications considering recycling aspects. In 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER) (pp. 1–6), 27–30 March 2013, Monaco.10.1109/EVER.2013.6521613
Search in Google Scholar Back to article
14. Yuksel, T., & Baylakoglu, I. (2007). Recycling of electrical and electronic equipment, benchmarking of disassembly methods and cost analysis. In Proceedings of the 2007 IEEE International Symposium on Electronics and the Environment (pp. 222–226), 7–10 May 2007.10.1109/ISEE.2007.369398
Search in Google Scholar Back to article
15. Binnemans, K., Jones, P. T., Blanpain, B., van Gerven, T., Yang, Y., Walton, & A., Buchert, M. (2013). Recycling of rare earths: A critical review. J. Clean. Prod., 51, 1–22.10.1016/j.jclepro.2012.12.037
Search in Google Scholar Back to article
16. Elwert, T., Goldmann, D., Romer, F., Buchert, M., Merz, C., Schueler, D., & Sutter, J. (2015). Current developments and challenges in the recycling of key components of (hybrid) electric vehicles. Recycling, 1(1), 25–60.10.3390/recycling1010025
Search in Google Scholar Back to article
17. Hogberg, S., Bendixen, F. B., Mijatovic, N., Jensen, B., & Holboll, J. (2015). Influence of demagnetization-temperature on magnetic performance of recycled Nd-Fe-B magnets. In 2015 IEEE International Electric Machines & Drives Conference (IEMDC) (pp. 1242–1246), 10–13 May 2015, USA.10.1109/IEMDC.2015.7409220
Search in Google Scholar Back to article
18. SKF. (2013). Rolling bearings and seals in electric motors and generators – A handbook for the industrial designer and end-user. SKF Group.
Search in Google Scholar Back to article
19. Tong, C., Wu, F., Zheng, P., Yu, B., Sui, Y., & Cheng, L. (2014). Investigation of magnetically isolated multiphase modular permanent-magnet synchronous machinery series for wheel-driving electric vehicles. IEEE Trans. Magn., 50(11), 1–4.10.1109/TMAG.2014.2319593
Search in Google Scholar Back to article
20. Ouyang, W., Huang, S., Good, A., & Lipo, T. A. (2005). Modular permanent magnet machine based on soft magnetic composite. In 2005 International Conference on Electrical Machines and Systems (pp. 235–239), 27–29 September 2005.10.1109/ICEMS.2005.202519
Search in Google Scholar Back to article
21. Hogberg, S., Pedersen, T. S., Bendixen, F. B., Mijatovic, N., Jensen, B. B., & Holboll, J. (2016). Direct reuse of rare earth permanent magnets – Wind turbine generator case study. In 2016 XXII International Conference on Electrical Machines (ICEM) (pp. 1625–1629), 4–7 September 2016,Lausanne, Switzerland.10.1109/ICELMACH.2016.7732741
Search in Google Scholar Back to article
22. Steentjes, S., Leuning, N., Dierdorf, J., Wei, X., Hirt, G., Weiss, H. A. …Hameyer, K. (2016).Effect of the interdependence of cold rolling strategies and subsequent punching on magnetic properties of NO steel sheets. IEEE Trans. Magn., 52(5), 1–4.10.1109/TMAG.2016.2516340
Search in Google Scholar Back to article
23. Boughanmi, W., Manata, J. P., Roger, D., Jacq, T., & Streiff, F. (2012). Life cycle assessment of a three-phase electrical machine in continuous operation. IET Electr. Power Appl., 6(5), p. 277.10.1049/iet-epa.2011.0219
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/lpts-2018-0025 | Journal eISSN: 2255-8896 | Journal ISSN: 0868-8257

Journal RSS Feed

Language: English

Page range: 13 - 23

Published on: Sep 25, 2018

Published by: Institute of Physical Energetics

In partnership with: Paradigm Publishing Services

Publication frequency: 6 issues per year

Keywords:

electric machines,

induction motors,

permanent magnet motors,

recycling

Related subjects:

Physics,

Technical and applied physics

© 2018 A. Rassõlkin, A. Kallaste, S. Orlova, L. Gevorkov, T. Vaimann, A. Belahcen, published by Institute of Physical Energetics
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 55 (2018): Issue 4 (August 2018)