Supporting military maintenance and repair with additive manufacturing
By:
References
- Additive Center, (2020). Royal Dutch Army: Increasing adaptability on the battlefield with 3D printing. Available at: https://additivecenter.com/2020/01/23/royal-dutch-army-increasing-adaptability-on-the-battlefield-with-3d-printing/ [accessed 15 January, 2021].
- AM Chronicle (2018). Norwegian Researchers Compare 3D Printing Results: Factory Setting vs. Onsite Military Container. Available at: https://www.amchronicle.com/news/norwegian-researchers-explores-use-of-3d-printing/ [accessed 15 January, 2021].
- Bass, F. M. (1969). A new product growth for model consumer durables. Management Science, 15, pp. 215–227.
- Berman, B. (2012). 3-D printing: The new industrial revolution. Business Horizons, 55(2), pp. 155–162.
- Busachi, A., Erkoyuncu, J., Colegrove, P., Drake, R., Watts, C., & Martina, F. (2016). Defining Next-Generation Additive Manufacturing Applications for the Ministry of Defence (MoD). s.l., Amsterdam: Elsevier, pp. 302–307.
- Busachi, A., Erkoyuncu, J., Colegrove, P., Drake, R., Watts, C., & Martina, F. (2018). Modelling Applications of Additive Manufacturing in Defence Support Services: Introducing the AM – Decision Support System, Milano: North Atlantic Treaty Organization Science and Technology Organization.
- Campuzano, F., & Mula, J. (2011). Supply Chain Simulation A System Dynamics Approach for Improving Performance, London: Springer.
- den Boer, J., Lambrechts, W., & Krikke, H. (2020). Additive manufacturing in military and humanitarian missions: Advantages and challenges in the spare parts supply chain. Journal of Cleaner Production, 257, p. 120301.
- Department of Defence (1983). MILITARY STANDARD – LOGISTIC SUPPORT ANALYSIS, Washington DC: Department of Defence United States of America.
- Department of Defence (1991). MILITARY STANDARD 1388-2B, Washington DC: Department of Defence – United States of America.
- Department of Defence (2021). Department of Defense Additive Manufacturing Strategy, Washington DC: Strategic Technology Protection and Exploitation Office of the Under Secretary of Defense for Research and Engineering.
- DeVisser, K. K. (2017). Qualification and certification of 3D printed parts for naval ships, Monterey, CA: Naval Postgraduate School.
- Ekström, T., Hilletofth, P., & Skoglund, P. (2020). Differentiation strategies for defence supply chain design. Journal of Defense Analytics and Logistics, 4(2), pp. 183–202.
- EOS, (2021). EOS M 290. Available at: https://www.eos.info/en/additive-manufacturing/3d-printing-metal/eos-metal-systems/eos-m-290 [Accessed accessed 12 March, 2021].
- Epler, I. J., Andrejić, M. D., Milenkov, M. A. & Sokolović, V. S. (2017). Concept of logistics prevention development in a defence system. Vojnotehnički glasnik/Military Technical Courier, 65(4), pp. 1027–1043.
- Espíndola, D., Frazzon, E. M., Hellingrath, B. & Pereira, C. E. (2012). Integrating Intelligent Maintenance Systems and Spare Parts Supply Chains. Bucharest, Elsevier, pp. 1017–1022.
- Fieldmade A. S. (2020). Fieldmade – Increasing your combat readiness on-site. Available at: https://fieldmade.no/nomad-series/ [accessed 20 February, 2021].
- Finnish Defence Forces (2013). Panssariprikaati. Available at: https://docplayer.fi/4333779-Panssariprikaati-8-8-2013.html [accessed 15 February, 2019].
- Finnish MoD (2011). Puolustushallinnon Materiaalipolitiikka, Helsinki: Finnish Ministry of Defence.
- Finnish MoD (2012). Huoltovarmuuskriittinen teknologia, tuotanto ja osaaminen (HTTO), Helsinki: Finnish Ministry of Defence.
- Folkeson, J. R., & Brauner, M. K. (2005). Improving the Army's Management of Reparable Spare Parts. Santa Monica, CA: RAND Corporation.
- Forrester, J. W. (1969). Principles of Systems. 1st edn. Cambridge: Wright-Allen Press.
- GAO (1999). Management Actions Create Spare Parts Shortages and Operational Problems. Washington DC: United States Government Accountability Office.
- GAO, U. S. G. A. O. (2005). Actions Needed to Improve the Availability of Critical Items during Current and Future Operations. Washington D.C.: United States Government Accountability Office.
- Gebusa, A. W., & Lemu, H. G. (2017). Design for manufacturing to design to Additive Manufacturing: Analysis of implications for design optimality and product sustainability. Procedia Manufacturing, 13, pp. 724–731.
- Gibson, I., Rosen, D. W., & Stucker, B. (2015). Additive Manufacturing Technologies: 3D printing, Rapid prototyping and direct digital maufacturing. 2nd edn. New York: Springer Science & Business Media.
- Goetschalckx, M. (2011). Supply Chain Engineering. New York: Springer.
- González, D. S., & Álvarez, A. G. (2018). Additive Manufacturing Feasibility Study & Technology Demonstration. Bryssel: European Defence Agency.
- Headquarters United States Marine Corps. (2020). Marine Corps Order 4700.4 – Additive Manufacturing Policy. Washington DC: Department of Defence – Department of the Navy.
- Hokkanen, M., & Rautio, S. (2018). 3D Printing Feasibility Study. Ylöjärvi: Finnish Defence Research Agency.
- Iftikhar, U. (2019). U.S Navy and Army Recruit 3D Printers for Effective Operations, Available at: https://3dprintingindustry.com/news/u-s-navy-and-army-recruit-3d-printers-for-effective-operations-150008/ [accessed 15 February, 2021].
- ISO/ASTM, 5. (2016). Additive Manufacturing – General Principles – Terminology. s.l.: Mechanical Engineering and Metals Industry Standardization in Finland.
- Judson, J. (2019). Still in service: ‘Ex Lab’ is the US Army's problem-solving MacGyver, Available at: https://www.defensenews.com/digital-show-dailies/ausa/2019/10/14/still-in-service-ex-lab-is-the-us-armys-problem-solving-macgyver/ [accessed 15 January, 2021].
- Katok, A., & Hasselblatt, B. (1995). Introduction to the Modern Theory of Dynamical Systems. Cambridge: Cambridge University Press.
- Khajavi, S., Partanen, J., & Holmström, J. (2013). Additive manufacturing in the spare parts supply chain. Computers in Industry, 65(1), pp. 50–63.
- Law, A. M. (2007). Simulation Modeling and Analysis. 4th edn. New York: Mc Graw-Hill Companies.
- Li, C. Y., & Yang, H. (2017). A mathematical model of demand-supply dynamics with collectability and saturation factors. International Journal of Bifurcation and Chaos, 27(1), pp. 1–14.
- Lu, B., Li, D., & Tian, X. (2015). Development trends in additive manufacturing and 3D printing. Engineering, 1(1), pp. 85–89. DOI: <a href="https://doi.org/10.15302/J-ENG-2015012" target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.15302/J-ENG-2015012</a>
- Meier, F. H. (1998). New product diffusion models in innovation management – a system dynamics perspective. System Dynamics Review, 14(4), pp. 285–308.
- Merten, P. P. (1991). Loop-based strategic decision support systems. Strategic Management Journal, 12(5), pp. 371–386.
- Milling, P. M. (2002). Understanding and managing innovation processes. System Dynamics Review, 18(1), pp. 73–86.
- Minculete, G., & Tutuianu, D. (2017). Aspects of logistic planning in a military unit AT peacetime. Journal of Defense Resources Management, 8(1), pp. 121–134.
- Morecroft, J. D. W. (2017). Management attitudes, learning and scale in successful diversification: A dynamic and behavioural resource system view. System Dynamics, OR Essentials. Palgrave Macmillan, London. pp. 69–106. DOI: <a href="https://doi.org/10.1057/978-1-349-95257-1_3" target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.1057/978-1-349-95257-1_3</a>
- МТЛБРУС, ООО (2017). Electronic spare parts catalog on MTLB, MTLBV, MTLBU, Engels: MTLBRUS OOO.
- NATO (2012). NATO Logistics Handbook. Bryssel: NATO HQ, Defence Policy and Planning Division, Logistics Capabilities Section.
- Nieminen, M., & Hyytinen, K. (2015). Päätöksenteko ja muutoksen edistäminen monimutkaisissa järjestelmissä. Espoo: Teknologian tutkimuskeskus VTT Oy.
- Parkatti, V. P. (2012). Maavoimien taistelu uudistuu. Sotilasaikakauslehti, 87(913), pp. 11–19.
- Pejić-Bach, M., & Čerić, V. (2007). Developing system dynamic models with “step-by-step” approach. Journal of Information and Organizational Sciences, 31(1), pp. 171–185.
- Prebilič, V. (2006). Theoretical aspects of military logistics. Defense & Security Analysis, 22(2), pp. 159–177.
- Puolustusvoimat – Finnish Defence Forces. (2003). Kunnossapito-opas. 1st edn. Helsinki: Edita Prima.
- Puolustusvoimat – Finnish Defence Forces. (2020). Sotilaan käsikirja. Helsinki: Finnish Defence Forces.
- Rogers, M. B., McConnell, B. M., Hodgson, T. J., Kay, M. G., King, R. E., Parlier, G., et al. (2018). A military logistics network planning system. Military Operations Research, 23(4), pp. 5–24.
- Romeijnders, W., & Teunter, R., & Van Jaarsveld, W. (2012). A two-step method for forecasting spare parts demand using information. European Journal of Operational Research, 220(2), pp. 386–393.
- Rumbaugh, J., Blaha, M., Premerlani, W., Eddy, F., & Lorensen, W. E. (1991). Object-Oriented Modeling and Design. New York: Prentice-Hall International Inc.
- Shreckengost, R. C. (1985). Dynamic simulation models: How valid are they?. Self-Report Methods of Estimating Drug Use: Current Challenges to Validity. Rockville: National Institute on Drug Abuse Research Monograph. 57, pp. 63–70.
- SLM Solutions (2018). SLM®280 2.0, Available at: https://www.slm-solutions.com/en/products/machines/slmr280-20/ [accessed 16 February, 2019].
- SPEE3D (2020). Australian Army Push Metal 3D Printing to Extremes in Latest Field Trial, Available at: https://spee3d.com/australian-army-push-metal-3d-printing-to-extremes-in-latest-field-trial/ [accessed 21 January, 2021].
- Thomas, D. S., & Gilbert, S. W. (2014). Costs and Cost Effectiveness of Additive Manufacturing. Gaithersburg, MD: National Institute of Standards and Technology.
- US ARMY (2013a). Commanders’ Maintenance Handbook. Washington DC: Headquarters Department of the Army.
- US ARMY (2013b). Soldiers’ Guide for Field Maintenance Operations. Washington DC: Hedquarters Department of the Army.
- US ARMY (2014). General Supply and Field Services Operations ATP 4–42. Washington DC: US ARMY.
- von Bertanlaffy, L. (1968). General System Theory. New York: George Braziller, Inc.
- VTT & AALTO. (2018). Digital Spare Pa0072ts. Helsinki: AALTO and VTT.
- Wright, I. (2018). Additive Manufacturing Materials for Production, Available at: https://www.engineering.com/AdvancedManufacturing/ArticleID/16955/Additive-Manufacturing-Materials-for-Production.aspx [accessed 4 March, 2019].
- Yin, R. K. (2003). Case Study Research, Design and Methods, 3rd edn. London New Delhi: SAGE Publications.
- Zeimpekis, V., Kaimakamis, G., & Daras, N. J. (2015). Military Logistics. 1st edn. Heidelberg New York Dordrecht London: Springer International Publishing.
Language: English
Page range: 23 - 36
Submitted on: Apr 26, 2021
Accepted on: Feb 11, 2022
Published on: Jul 27, 2022
Published by: National Defense University
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2022 Samu Rautio, Ilari Valtonen, published by National Defense University
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.