Degradation of Mordant Blue 9 by BDD/TiO2 photoelectrode using 3D printed photoreactor
References
- L. Zhang, X. Zhang, C. Wei, F. Wang, H. Wang, Z. Bian, “Interface engineering of Z-scheme α-Fe₂O₃/g-C₃N₄ photo-anode: Simultaneous enhancement of charge separation and hole transportation for photoelectrocatalytic organic pollutant degradation”, Chemical Engineering Journal, vol. 435, p. 134873, 2022.
- T. Mackuľak, E. Medvecká, A. Vojs Staňová, P. Brandeburová, R. Grabic, O. Golovko, M. Marton, I. Bodík, A. Medveďová, M. Gál, M. Planý, A. Kromka, V. Špalková, A. Škulcová, I. Horáková, M. Vojs, „Boron doped diamond electrode – The elimination of psychoactive drugs and resistant bacteria from wastewater“, Vacuum, vol. 171, p. 108957, 2020.
- T. Mackuľak, M. Marton, M. Radičová, A. Vojs Staňová, R. Grabic, L. Bírošová, K. Nagyová, M. Vojs, I. Bodík, P. Brandeburová, M. Gál, „Monitoring of micropollutants and resistant bacteria in wastewater and their effective removal by boron doped diamond electrode“, Monatshefte für Chemie - Chemical Monthly, vol. 148, no. 3, pp. 539–548, 2017.
- M. Vojs, M. Varga, O. Babchenko, M. Michniak, M. Marton, “Electrical characterization of diamond films deposited in nitrogen and oxygen containing gas mixture”, Applied Surface Science, vol. 312, pp. 226–230, 2014.
- M. Marton, M. Mikolášek, J. Bruncko, I. Novotný, T. Ižák, M. Vojs, H. Kozak, M. Varga, A. Artemenko, A. Kromka, „Fabrication and Characterization of N-Type Zinc Oxide/P-Type Boron Doped Diamond Heterojunction“, Journal of Electrical Engineering, vol. 66, no. 5, pp. 273–278, 2015.
- M. Behúl, M. Vojs, M. Marton, P. Michniak, M. Mikolášek, M. Kurniawan, H. L. Honig, D. V. Zyabkin, M. O. Ramirez, L. Spieß, D. Flock, A. Bund, M. Papula, R. Redhammer, „Nanostructured boron doped diamond enhancing the photoelectrochemical performance of TiO₂/BDD hetero-junction anodes“, Vacuum, vol. 171, p. 109006, 2020.
- U. Diebold, “The surface science of titanium dioxide”, Surface Science Reports, vol. 48, no. 5-8, pp. 53-229, 2003.
- M. Behul, M. Vojs, M. Marton et al., “Nanoscale Engineering of Si/BDD/TiO₂ heterostructure interfaces to enhance photoelectrochemical performance”, Applied Surface Science Advances, vol. 27, p. 100757, 2025.
- M. R. Hoffmann, S. T. Martin, W. Choi, D. W. Bahnemann, “Environmental Applications of Semiconductor Photocatalysis”, Chemical Reviews, vol. 95, no. 1, pp. 69–96, 1995.
- M. Marton, M. Ritomsky, P. Michniak, M. Behul, V. Rehacek, R. Redhammer, A. Vincze, M. Papula, M. Vojs, „Study of self-masking nanostructuring of boron doped diamond films by RF plasma etching“, Vacuum, vol. 169, p. 108954, 2019.
- O. Kádár, F. Uherek, J. Chlpík, J. Remsa, J. Bruncko, A. Vincze, „Characterization and optical properties of TiO₂ prepared by pulsed laser deposition“, in 2010 International Conference on Applied Electronics, pp. 141–144, 2010.
- T. Klein, P. Achatz, J. Kacmarcik, C. Marcenat, F. Gustafsson, J. Marcus, E. Bustarret, J. Pernot, F. Omnes et al., „Metal-insulator transition and superconductivity in boron-doped diamond“, Physical Review B, vol. 75, no. 16, p. 165313, 2007.
- C. Terashima, R. Hishinuma, N. Roy, Y. Sugiyama, S. S. Latthe, K. Nakata, T. Kondo, M. Yuasa, A. Fujishima, “Charge Separation in TiO₂/BDD Heterojunction Thin Film for Enhanced Photoelectrochemical Performance”, ACS Applied Materials & Interfaces, vol. 8, no. 3, pp. 1583–1588, 2016.
- J. Ćirković, A. Radojković, D. Luković Golić, N. Tasić, M. Čizmić, G. Branković, Z. Branković, “Visible-light photocatalytic degradation of Mordant Blue 9 by single-phase BiFeO3 nanoparticles”, Journal of Environmental Chemical Engineering, vol. 9, no. 1, p. 104587, 2021.
- M. N. Pervez, F. Y. Telegin, Y. Cai, D. Xia, T. Zarra, V. Naddeo, “Efficient Degradation of Mordant Blue 9 Using the Fenton-Activated Persulfate System”, Water, vol. 11, no. 12, p. 2532, 2019.
- C. A. Martínez-Huitle, M. A. Rodrigo, I. Sirés, O. Scialdone, “Single and coupled electrochemical processes and reactors for the abatement of organic water pollutants: A critical review”, Chemical Reviews, vol. 115, no. 24, pp. 13362–13407, 2015.
- G. C. Tedesco, C. A. Joll, W. P. Ela, A. Pivrikas, D. J. Henry, „3D-Printed TiO₂ Electrode as a Viable Alternative for Photoelectrocatalytic Purification of Water“, ChemistrySelect, vol. 8, no. 38, p. e202300288, 2023.
- P. A. Carneiro, M. E. Osugi, J. J. Sene, M. A. Anderson, M. V. B. Zanoni, „Evaluation of color removal and degradation of a reactive textile azo dye on nanoporous TiO₂ thin-film electrodes“, Electrochimica Acta, vol. 49, no. 22–23, pp. 3807–3820, 2004.
- J. R. Huang, X. Tan, T. Yu, L. Zhao, W.-L. Hu, „Enhanced Photoelectrocatalytic and Photoelectrochemical Properties by High-Reactive TiO₂/SrTiO₃ Hetero-Structured Nanotubes with dominant {001} Facet of Anatase TiO₂“, Electrochimica Acta, vol. 146, pp. 320–328, 2014.
DOI: https://doi.org/10.2478/jee-2026-0040 | Journal eISSN: 1339-309X (formerly 1335-3632) | Journal ISSN: 1335-3632
Language: English
Page range: 412 - 418
Submitted on: Jun 2, 2026
Published on: Aug 27, 2026
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Related subjects:
© 2026 Miroslav Behul, Marián Marton, Pavol Michniak, Jaroslav Bruncko, Marian Vojs, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.