Acoustic noise prediction for synchronous motors with different topologies using MFCC-based datasets
By: Faaris Mujaahid, Min-Fu Hsieh and Thorikul Huda
References
- S. Leitman and B. Brant, Build Your Own Electric Vehicle, 3rd Edition. IEEE Electrical Insulation Magazine. New York: Mcgraw-Hill, 2014.
- A. Lordoglu, M. O. Gulbahce, and D.A. Kocabas, “A comprehensive disturbing effect analysis of multi-sectional rotor slot geometry for induction machines in electrical vehicles,” IEEE Access, vol. 9, pp. 49590-49600, 2021. doi: 10.1109/ACCESS.2021.3068821
- M. Yilmaz, “Limitations/capabilities of electric machine technologies and modeling approaches for electric motor design and analysis in plug-in electric vehicle applications,” Renewable and Sustainable Energy Reviews, vol. 52, pp. 80-99, 2015. doi: 10.1016/j.rser.2015.07.033
- M. İnci, M. Büyük, M. H. Demir, and G. İlbey, “A review and research on fuel cell electric vehicles: Topologies, power electronic converters, energy management methods, technical challenges, marketing and future aspects,” Renewable and Sustainable Energy Reviews, vol. 137, 2021. doi: 10.1016/j.rser.2020.110648
- W. S. Jung, H. K. Lee, Y. K. Lee, S. M. Kim, J. I. Lee, and J. Y. Choi, (2023) “Analysis and Comparison of Permanent Magnet Synchronous Motors According to Rotor Type under the Same Design Specifications,” Energies, vol. 16, no. 3, 2023. doi: 10.3390/en16031306
- B. Bilgin, J. Liang, M. V. Terzic, J. Dong, R. Rodriguez, E. Trickett, and A. Emadi, “Modeling and Analysis of Electric Motors: State-of-the-Art Review,” IEEE Transactions on Transportation Electrification, vol. 5, no. 3, pp. 602-617, 2019. doi: 10.1109/TTE.2019.2931123
- J. F. Gieras, C. Wang, and J. C. Lai, Noise of polyphase electric motors. Boca Raton: Taylor & Francis, 2005.
- Y. Fang and T. Zhang, “Sound Quality of the Acoustic Noise Radiated by PWM-Fed Electric Powertrain,” IEEE Transactions on Industrial Electronics, vol. 65, no. 6, pp. 4534-4541, 2018. doi: 10.1109/TIE.2017.2767558
- E. Król and M. Maciążek, “Identification and Analysis of Noise Sources of Permanent Magnet Synchronous Traction Motor with Interior Permanent Magnet,” Energies, vol. 16, no. 16, 2023. doi: 10.3390/en16166018
- Z. Q. Zhu, Z. P. Xia, L. J. Wu, and G. W. Jewell, “Influence of slot and pole number combination on radial force and vibration modes in fractional slot PM brushless machines having single- and double-layer windings,’ 2009 IEEE Energy Conversion Congress and Exposition (ECCE), 2009. doi: 10.1109/ECCE.2009.5316553
- S. Wu S, X. Yan, Z. Chen, Y. Zhang, and X. Feng, “New Rotor Topologies for Electromagnetic Forces and Acoustic Noise Reduction of claw Pole Alternators,” Journal of Electrical Engineering and Technology, vol. 18, pp. 3751-3762, 2023. doi: 10.1007/s42835-023-01559-z
- J. W. Jung, S. H. Lee, G. H. Lee, J. P. Hong, D. H. Lee, and K. N. Kim, “Reduction design of vibration and noise in IPMSM type integrated starter and generator for HEV,’ IEEE Transactions on Magnetics, vol. 46, no. 6, pp. 2454-2457, 2010. doi: 10.1109/TMAG.2010.2041434
- J. Cai and Z. Deng, “Offline and online modelling of switched reluctance motor based on RBF neural networks,” Journal of Electrical Engineering, vol. 64, no. 3, pp. 186-190, 2013. doi: 10.2478/jee-2013-0027
- H. S. Nogay, “Deep convolutional neural networks for automatic coil pitches detection systems in induction motors,” Journal of Electrical Engineering, vol. 72, no. 3, pp. 198-202, 2021. doi: 10.2478/jee-2021-0027
- M. F. Hsieh, L. H. Lin, T. A. Huynh, and D. Dorrell, “Development of Machine Learning-Based Design Platform for Permanent Magnet Synchronous Motor Toward Simulation Free,” IEEE Transactions on Magnetics, vol. 59, no. 11, 2023. doi: 10.1109/TMAG.2023.3309151
- S. M. K. Zaman, X. Liang, and L. Zhang, “Greedy-gradient max cut-based fault diagnosis for direct online induction motors,” IEEE Access, vol. 8, pp. 177851-177862, 2020. doi: 10.1109/ACCESS.2020.3027322
- M. Ertargin, O. Yildirim, and A. Orhan, “Mechanical and electrical faults detection in induction motor across multiple sensors with CNN-LSTM deep learning model,” Electrical Engineering, vol. 106, pp. 6941-6951, 2024. doi: org/10.1007/s00202-024-02420-w
- M. Eker and B. Gündogan, “Demagnetization fault detection of permanent magnet synchronous motor with convolutional neural network,” Electrical Engineering, vol. 105, pp. 1695-1708, 2023. doi: 10.1007/s00202-023-01768-9
- L. He, X. Wu, Y. Nie, and W. Shi, “Loss Prediction of Vehicle Permanent Magnet Synchronous Motor Based on Deep Learning,” Journal of Electrical Engineering and Technology, vol. 18, 1053-1063, 2023. doi: 10.1007/s42835-022-01153-9
- X. Zhang, C. Li, M. Xue, W. Wang, and L. Zhu, “Application of Deep Learning in Motor Vibration and Noise Suppression Based on Negative Magnetostrictive Effect,” Journal of Electrical Engineering and Technology, vol. 18, pp. 1931-1944, 2023. doi: 10.1007/s42835-022-01241-w
- T. Song, H. Liu, B. Bu, and Z. Zhang, “Rapid Calculation and Optimization of Vibration and Noise of Permanent-Magnet Synchronous Motors for EVs Based on Equivalent Structural Network,” Machines, vol. 10, no. 4, pp. 281, 2022. doi: 10.3390/machines10040281
- Z. Hashemi, F. Zohrabi, and M. Mardaneh, “A Multi-objective Optimization of Switched Reluctance Motor using a Hybrid Analytic-ANFIS Model Considering the Vibrations,” Iranian Journal of Science and Technology, Transactions of Electrical Engineering, vol. 43, pp. 361-371, 2019. doi: 10.1007/s40998-018-0093-1
- A. K. Sahu, A. Emadi, and B. Bilgin, “Noise and Vibration in Switched Reluctance Motors: A Review on Structural Materials, Vibration Dampers, Acoustic Impedance, and Noise Masking Methods,” IEEE Access, vol. 11, pp. 27702-27718, 2023. doi: 10.1109/ACCESS.2023.3257124
- H. J. Shin, J. Y. Choi, H. I. Park, and S. M. Jang, “Vibration analysis and measurements through prediction of electromagnetic vibration sources of permanent magnet synchronous motor based on analytical magnetic field calculations,” IEEE Transactions on Magnetics, vol. 48, no. 11, 4216-4129, 2012. doi: 10.1109/TMAG.2012.2200658
- W. Zhang, Y. Xu, H. Huang, and J. Zou, “Vibration reduction for dual-branch three-phase permanent magnet synchronous motor with carrier phase-shift technique,” IEEE Transactions on Power Electronics, vol. 35, no. 1, pp. 607-618, 2020. doi: 10.1109/TPEL.2019.2910311
- A. Malekipour, A. Corne, L. Garbuio, P. Granjon, and L. Gerbaud, “A Closed-Loop PMSM Sensorless Control Based on the Machine Acoustic Noise,” IEEE Transactions on Industrial Electronics, vol. 70, no. 10, pp. 9859-9869, 2023. doi: 10.1109/TIE.2022.3206755
- R. M. Pindoriya, G. Gautam, and B. S. Rajpurohit, “A Novel Application of Pseudorandom-Based Technique for Acoustic Noise and Vibration Reduction of PMSM Drive,” 2019 IEEE Industry Applications Society Annual Meeting, 2019. doi: 10.1109/TIA.2020.2997904
- W. Deng and S. Zuo, “Electromagnetic vibration and noise of the permanent-magnet synchronous motors for electric vehicles: An overview,” IEEE Transactions on Transportation Electrification, vol. 5, no. 1, pp. 59-70, 2019. doi: 10.1109/TTE.2018.2875481
- G. Park, C. Kim, M. Lee, and C. Choi, “Building geometry simplification for improving mesh quality of numerical analysis model,” Applied Sciences, vol. 10, no. 16, 2020. doi: 10.3390/APP10165425
- M. Sosnowski, R. Gnatowska, K. Grabowska, J. Krzywański, and A. Jamrozik, “Numerical analysis of flow in building arrangement: Computational domain discretization,” Applied Sciences, vol. 9, no 5, 2019. doi: 10.3390/app9050941
- L. Liu, J. Zhang, C. Song, C. Birk, and W. Gao, “An automatic approach for the acoustic analysis of three-dimensional bounded and unbounded domains by scaled boundary finite element method,” International Journal of Mechanical Sciences, vol. 151, pp. 563-581, 2019. doi: 10.1016/j.ijmecsci.2018.12.018
- A. Johnen, J. C. Weill, and J. F. Remacle, “Robust and efficient validation of the linear hexahedral element,” Procedia Engineering, vol. 203, pp. 271-283, 2017. doi: 10.1016/j.proeng.2017.09.809
- F. Mujaahid, M. F. Hsieh, T. Huda, M. Jamil, M. Y. Mustar, “Mesh Independence for Acoustic Noise of Permanent Magnet Synchronous Motor,” 2023 International Workshop on Artificial Intelligence and Image Processing (IWAIIP), 2023. doi: 10.1109/IWAIIP58158.2023.10462759
- R. B. Randall, “A history of cepstrum analysis and its application to mechanical problems,” Mechanical Systems and Signal Processing, vol. 97, pp. 3-19. doi: 10.1016/j.ymssp.2016.12.026
- Z. A. Haq and Z. A. Jaffery, “Impact of activation functions and number of layers on the classification of fruits using CNN,” 2021 8th International Conference on Computing for Sustainable Global Development (INDIACom), 2021. doi: 10.1109/INDIACom51348.2021.00040
- X. Zhu, X. Zhao, J. Yao, W. Deng, H. Shao, and Z. Liu, “Adaptive Multiscale Convolution Manifold Embedding Networks for Intelligent Fault Diagnosis of Servo Motor-Cylindrical Rolling Bearing Under Variable Working Conditions,” IEEE/ASME Transactions on Mechatronics, vol. 29, no. 3, pp. 2230-2240, 2024. doi: 10.1109/TMECH.2023.3314215
- M. Jing, G. Jia, and F. Zhang, “A permanent magnet motor winding fault diagnosis method based on image recognition and transfer learning,” 2024 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), 2024. doi: 10.1109/ITECAsia-Pacific63159.2024.10738570
Language: English
Page range: 189 - 199
Submitted on: Feb 16, 2026
Published on: Apr 18, 2026
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 6 issues per year
Keywords:
Related subjects:
© 2026 Faaris Mujaahid, Min-Fu Hsieh, Thorikul Huda, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.