References
- Budynas R.G., Nisbett K.J. Shigley’s. 2015. Mechanical Engineering Design. Tenth Edition. Editor Mc Graw Hill Education.
- Chindriș, I. I., Pondichi-Alb, C., Hoda, T., 2022. Flange-Type Joints Connected by Preloaded High Strength Bolts. The 16th International Conference Interdisciplinarity in Engineering. Lecture Notes in Networks and Systems volume 605, pp.32-46. doi:10.1007/978-3-031-22375-4_3.
- Choudhury M. R., Quayyum S., Amanat K. M., 2008. Modeling and Analysis of a Bolted Flanged Pipe Joint Subjected to Bending, in Conference on Engineering Mechanics, Structures, Engineering Geology (EMESEG’08), Crete Island, Greece.
- EN 1993-1-8/2005. Eurocode 3: Design of steel structures. Part 1-8: Design of joints.
- European Steel Design Education Programme, ESDEP, The ESDEP Society. http:/www.esdep.org.
- Guțiu, Șt. I, Moga, C., Danciu. A. D., 2022. Connections of Steel Girders with End Plates and Partially Prestressed Bolts. Romanian Journal of Transport Infrastructure, vol. 10(2) pp.1-16. https://doi.org/10.2478/rjti-2021-0009.
- Guțiu, Șt. I., Moga C., Danciu. A. D., 2019a. Considerations regarding roadway steel bridges connections using bolts and end plates. The 10th Conference on Bridges in Danube Basin, pp.150-153.
- Guțiu, Șt. I., Moga P., Moga C., Danciu A. D., 2016. The new arch bridge in the city of Sibiu, Romania. The 9th International Conference Bridges in Danube Basin 2016, published in “Procedia Engineering 156 ELSEVIER pp.132-139 doi:10.1016/j.proeng.2016.08.259.
- Guțiu Șt.I., Moga C., Suciu M., Danciu A. D., 2021. Comparative analysis between two constructive solutions of a steel tied-arch road bridge, The 15th International Conference Interdisciplinarity in engineering. Inter-Eng 2021. Lecture Notes in Networks and Systems, vol. 386, Springer, Cham. https://doi.org/10.1007/978-3-030-93817-8_9.
- Kullak G.L., Fisher J.W., Struik J.H.A. 2001. Guide to Design Criteria for Bolted and Riveted Joints. AISC.
- Leonardo da Vinci Project, Design of structural connection to Eurocode 3, Watford, 2003.
- Moga, C., Suciu, M., Drăgan D., Nerișanu R., 2019b. Efficient connection of cross girders of arch steel road bridges Buletinul Institultului Politehnic Iași. Vol. 65 (69). Nr. 2, pp.45-64.
- Moga, C., Suciu M., Pondichi-Alb C., 2019. Considerations upon the overloading of prestressed bolts in tensile forced connections. Buletinul Institutului Politehnic Iași. Vol. 65 (69). Nr. 1 pp.169-182.
- Novoselac S., Kozak D., Ergic T., Damjanovic D., 2014. Fatigue of shaft flange bolted joints under preload force and dynamic response, FME Transactions, vol. 42, pp. 269-276.
- Urse G., Durbacă I., Panait I. C., 2018. Some research results on the tightness and strength of flange joints, Journal of Engineering Sciences and Innovation, vol. 3, no. 2, pp. 107-130.