References
- Ascione, L., Feo, L., Fraternali, F. (2005), Load carrying capacity of 2D FRP/strengthened masonry structures. Composites Part B: Engineering. 36, pp. 619–626.10.1016/j.compositesb.2004.12.004
- Arisoy, B., Ercan, E., Demir, A. (2015), Strengthening of brick masonry with PVA fiber reinforced cement stucco. Construction and Building Materials. 79, pp. 255–262.10.1016/j.conbuildmat.2014.12.093
- Bui, T., Labri, A. S., Reboul, N., Ferrier, E. (2015), Shear behavior of masonry walls strengthened by external bonded FRP and TRC. Composite Structures. 132, pp. 923-932.10.1016/j.compstruct.2015.06.057
- Bui, T., Limam, A. (2014), Out-of-Plane behavior of hollow concrete block masonry walls unstrengthened and strengthened with CFRP composite. Composites Part B: Engineering. 67, pp. 527-542.10.1016/j.compositesb.2014.08.006
- Bisby, L. A., Kodur, V. K. R. (2007), Evaluating the fire endurance of concrete slabs reinforced with FRP bars: considerations for a holistic approach. Composites Part B: Engineering. 38 (5), pp. 547–558.10.1016/j.compositesb.2006.07.013
- Bisby, L. A., Green, M. F., Kodur, V. K. R. (2005), Response to fire of concrete structures that incorporate FRP, Progress in Structural Engineering Materials. 7 (3), pp. 136–149.
- Codispoti, R., Oliveira, D. V., Olivito, R. S., Lourenço, P. B., Fangueiro, R. (2015), Mechanical performance of natural fiber-reinforced composites for the strengthening of masonry. Composites Part B: Engineering. 77, pp. 74-83.10.1016/j.compositesb.2015.03.021
- Construction Chemicals (2020), Technical Specification, 2nd Edition, Imporient Chemicals (Pvt.) Ltd., Lahore Pakistan
- Deng, M., Dong, Z., Ma, P. (2019), Cyclic loading tests of flexural-failure dominant URM walls strengthened with engineered cementitious composite. Engineering Structures. 194, pp. 173-182.10.1016/j.engstruct.2019.05.073
- ElGawady, M. A., Lestuzzi, P., Badoux, M. (2006), Seismic retrofitting of unreinforced masonry walls using FRP. Composites Part B: Engineering. 37(2), pp. 148–162.
- El-Salakawy, T. S., Hamdy, G. A., Al-Hariri, M. O. R., Mubarak, S. I. (2020), Experimental and numerical study of bond between masonry and near-surface mounted steel bars. Case Studies in Construction Materials. 13:e00468.10.1016/j.cscm.2020.e00468
- Farooq S. H. (2010), Strengthening of Masonry Wall Panels under in plane loading. PhD thesis, Department of Civil Engineering, University of Engineering & Technology Lahore Pakistan
- Farooq, S. H., Shahid, I., Ilyas, M. (2014), Seismic performance of masonry strengthened with steel strips. KSCE Journal of Civil Engineering. 18 (7), pp. 2170–2180.10.1007/s12205-014-0540-0
- Ferretti, E. (2020), Recent Advances in the Straps/Strips Technique for Out-of-plane Strengthening of Load-bearing Masonry Walls. Procedia Structural Integrity. 25, pp. 33-46.10.1016/j.prostr.2020.04.007
- Ghezelbash, A., Beyer, K., Dolatshahi, K. M., Yekrangnia, M. (2020), Shake table test of a masonry building retrofitted with shotcrete. Engineering Structures. 219, pp. 110912.10.1016/j.engstruct.2020.110912
- Lin, Y. W., Wotherspoon, L., Scott, A., Ingham, J. M. (2014), In-plane strengthening of clay brick unreinforced masonry wallettes using ECC shotcrete. Engineering Structures. 66, pp. 57–65.10.1016/j.engstruct.2014.01.043
- Luccioni, B., Rougier, C. V. (2011), In-plane retrofitting of masonry panels with fibre reinforced composite materials. Construction and Building Materials. 25, pp. 1772-1788.10.1016/j.conbuildmat.2010.11.088
- Mahmood, H., Ingham, J.M. (2011), Diagonal compression testing of FRP-retrofitted unreinforced clay brick masonry wallettes. Journal of Composite Construction. 15(5), pp. 810–820.10.1061/(ASCE)CC.1943-5614.0000209
- Mazzotti, C., Ferracuti, B., Bellini, A. (2015), Experimental bond tests on masonry panels strengthened by FRP. Composites Part B. 80, pp. 223-237.10.1016/j.compositesb.2015.05.019
- Marcari, G., Manfredi, G., Prota, A., Pecce, M. (2007), In-plane shear performance of masonry panels strengthened with FRP. Composites, Part B: Engineering. 38, pp. 887–901.10.1016/j.compositesb.2006.11.004
- Menna, C., Asprone, D., Ferone, C., Colangelo, F., Balsamo, A., Prota, A. (2013), Use of geopolymers for composite external reinforcement of RC members. Composites Part B: Engineering. 45 (1), pp. 1667–1676.10.1016/j.compositesb.2012.09.019
- Prota, A., Manfredi, G., Nardone, F. (2008), Assessment of design formulas for in-plane FRP strengthening of masonry walls, Journal of Composite Construction. 12 (6), pp. 643–649.
- Ramaglia, G., Fabbrocino, F., Lignola, G. P., Prota, A. (2020), Impact of FRP and FRCM on the ductility of strengthened masonry members. Structures. 28, pp. 1229-1243.10.1016/j.istruc.2020.09.025
- Triwiyono, A., Nugroho, A. S. B., Firstyadi, A. D., Ottama, F. (2015), Flexural strength and ductility of concrete brick masonry wall strengthened using steel reinforcement. Procedia Engineering. 125, pp. 940-947.10.1016/j.proeng.2015.11.124
- Valluzzi, M. R., Tinazzi, D., Modena, C. (2002), Shear behavior of masonry panels strengthened by FRP laminates. Construction and Building Materials. 16 (7), pp. 409–416.10.1016/S0950-0618(02)00043-0
- Wei, C., Zhou, X., Xie, J. (2007), Experimental study of masonry walls strengthened with CFRP. Structural Engineering & Mechanics. 25(6), pp. 675–690.10.12989/sem.2007.25.6.675
- Yao, X., Guo, Z. X., Basha, S. H., Huang, Q. (2021), Innovative seismic strengthening of historic masonry walls using polymer mortar and steel strips. Engineering Structures. 228, pp. 111507.10.1016/j.engstruct.2020.111507
- Zhou, D., Lei, Z., Wang, J., (2013), In-plane behavior of seismically damaged masonry walls repaired with external BFRP. Composite Structures. 102, pp. 9-19.10.1016/j.compstruct.2013.01.031