Technical-Economical Comparison Between Vertical Link Beam and Knee Brace Systems in Mid-Rise Steel Buildings
References
- Roeder, C.W, Lehman, D.E, Yoo J. H, “Performance-Based Seismic Design of Braced-Frame Gusset Plate Connections”, Connections in Steel Structures V-Amsterdam - June 3-4, 2004.
- Aristszabal-occhoa JD. “Disposable Knee Bracing: improvement in seismic design of steel frames” journal of structural engineering, ASCE 1986; 112(7): 1544-52
- Balendra T., “Diagonal Brace with Ductile Knee Anchor for and Seismic Steel Frames”, Journal of Earthquake Engineering Structural Dynamics, Nol.19, 1990, pp. 847-858.
- Ming-Tuck Sam Thambirajah Balendra and Chih-Young Liaw, “Earthquake-resistant steel frames with energy dissipating knee elements”, Engineering Structures Volume 17, Issue 5, June 1995, Pages 334-343.
- Balendra, T, E L Lim and C Y Liaw, “Large scale seismic testing of knee-brace-frame.”, Journal of Structural Engineering, ASCE, 123, 1 (1997): 11-19.
- Zahrai S.M, Moslehi Tabar. A, “Cyclic behavior of steel braced frames having Shear Panel systems”, Asian Journal of civil engineering (Building and housing) VOL. 7, NO.1 (2006), 13-26.
- Fehling E., Pauli W. Bauwkamp j.g. (1992) “Use of vertical shear link in Eccentrically Braced frames”, Earthquake Engineeng, tenth Wird conference 1992.
- Mofid M., Khosravi, P., “Nonlinear analysis of Disposable Knee Bracing”, Computers and Structures, Vol. 75, 65-72, 2000.
- Massood Mofid, Mehrdad Lotfollahi, “On the characteristics of new ductile knee bracing systems”, Journal of Constructional Steel Research 62 (2006) 271–281.
- Massood Mofid, Mehrdad Lotfollahi, “On the design of new ductile knee bracing systems”, Journal of Constructional Steel Research 62 (2006) 282–294.
- Naeim, F., “The seismic design handbook”, 2nd edition, 2001, VNR, New York.
- Federal Emergency Management Agency (FEMA), “Prestandard and Commentary for the Seismic Rehabilitation of Buildings“, FEMA 356 / November 2000.
- HUANG Zhen, LI Qing-song, CHEN Long-zhu, “Elastoplastic analysis of knee bracing frame”, Journal of Zhejiang University SCIENCE, ISSN 1009-3095, 2005 6A(8):784-789.
- Tahouni, Sh. (1998). Design of steel structures based on the Iranian steel design code, 2nd edition.
- Building and housing research center, 2800 Iranian Code of Practice for Seismic Resistant Design of Buildings, 1999.
- Farahi, M., Mofid, M. (2013). “On the quantification of seismic performance factors of Chevron Knee Bracing, in steel structures”, Engineering Structures, Vol. 46, pp. 155-164.
- Zahrai, S.M., Jalali, M. (2014). “Experimental and analytical investigation on seismic behavior of ductile steel knee braced frames”, Steel and Composite Structures, an Intl. Journal, Vol. 16, No. 1, pp. 1-21.
- Zahrai, S.M. (2015). “Cyclic Testing of Chevron Braced Steel Frames with IPE shear panels”, Steel and Composite Structures, an Intl. Journal, Vol. 19, No. 5, pp. 1167-1184.
- Kazemzadeh Azad, S., Topkaya, C. (2017). “A review of research on steel eccentrically braced frames”, Journal of Constructional Steel Research, Vol. 128, pp. 53-73.
- Miri, M., Zare, A., Abbaszadeh, H. (2009). “Seismic behavior of steel frames investigation with knee brace based on pushover analysis”, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering Vol: 3, No: 2, pp. 122-128.
DOI: https://doi.org/10.2478/jaes-2019-0015 | Journal eISSN: 2284-7197
Language: English
Page range: 115 - 120
Submitted on: Apr 6, 2018
Accepted on: Jul 27, 2018
Published on: Jul 25, 2019
Published by: University of Oradea, Civil Engineering and Architecture Faculty
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2019 Mahmoud Sadeghpour, published by University of Oradea, Civil Engineering and Architecture Faculty
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.