References
- Afroughsabet, V., & Ozbakkaloglu, T. (2015). “Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers.” Construction and Building Materials, 94, 73–82.
- Alhozaimy, A. M., Soroushian, P., & Mirza, F. (1996). “Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials.” Cement and Concrete Composites, 18(2), 85–92.
- Amizah, W., Jusoh, W., Ibrahim, I. S., Rahman, A., & Sam, M. (2017). “Flexural Behaviour of Reinforced Concrete Beams With Discrete Steel – Polypropylene Fibres.” MATEC Web of Conferences, 01020.
- Arisoy, B., & Wu, H.-C. (2008). “Material characteristics of high performance lightweight concrete reinforced with PVA.” Construction and Building Materials, 22(4), 635–645.
- Balaguru, P. N., & Shah, S. P. (1992). Fiber Reinforced Cement Composites. McGraw-Hill; First Edition edition.
- Banthia, N., Cangiano, S., Cucitore, R., Plizzari, G. A., & Sorelli, L. (2003). “Hybrid Fibre Reinforced Concrete under Fatigue Loading.” International Conference on FATIGUE CRACK PATHS (FCP 2003), Parma (Italy), 18 – 20 September, 2003, (Fcp), 18–20.
- Banthia, N., & Gupta, R. (2004). “Hybrid fiber reinforced concrete (HyFRC): Fiber synergy in high strength matrices.” Materials and Structures/Materiaux et Constructions, 37(274), 707–716.
- Banthia, N., & Nandakumar, N. (2003). “Crack growth resistance of hybrid fiber reinforced cement composites.” Cement and Concrete Composites, 25(1), 3–9.
- Banthia, N., & Sappakittipakorn, M. (2007). “Toughness enhancement in steel fiber reinforced concrete through fiber hybridization.” Cement and Concrete Research, 37(9), 1366–1372.
- Banthia, N., & Sheng, J. (1990). “Micro-reinforced cementitious materials.” In Materials Research Society Fall Meeting Proceedings (pp. 25–32).
- Banthia, N., & Soleimani, S. M. (2005). “Flexural response of hybrid fiber-reinforced cementitious composites.” ACI Materials Journal, 102(6), 382–389.
- Bentur, A., & Mindess, S. (2006). Fiber Reinforced Cementitious Composites. Civil Engineering.
- Bindiganavile, V., & Banthia, N. (2001). “Polymer and steel fiber-reinforced cementitious composites under impact loading - Part 1: Bond-slip response.” ACI Materials Journal, 98(1), 10–16.
- Dong, C., Sudarisman, & Davies, I. J. (2013). “Flexural properties of e glass and TR50S carbon fiber reinforced epoxy hybrid composites.” Journal of Materials Engineering and Performance, 22(1), 41–49.
- Eswari, S., Raghunath, P. N., & Kothandaraman, S. (2011). “Regression modeling for strength and toughness evaluation of hybrid fibre reinforced concrete.” ARPN Journal of Engineering and Applied Sciences, 6(5).
- He, D., Wu, M., & Jie, P. (2017). “Study on Mechanical Properties of Hybrid Fiber Reinforced Concrete.” IOP Conf. Series: Earth and Environmental Science, 73(1).
- Hillerborg, A., Modéer, M., & Petersson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cement and Concrete Research, 6(6), 773–781.
- Hong, S. G., & Choi, K. K. (2012). “Crack modeling of steel-carbon hybrid FRCCs.” Advanced Composite Materials, 21(4), 283–298.
- Jadhav, H. S., & Koli, M. D. (2013). “Flexural Behavior of Hybrid Fiber Reinforced Concrete Beams.” International Journal of Structural and Civil Engineering Research, 2(3), 210–218.
- Jayaprakasan, V., & Divya, R. (2015). “Comparative study of hybrid fiber reinforced concrete and find optimum dosage of fiber.” Int J Appl Civil Environ Eng, 16–23.
- Johnston, C. (1974). “Steel fibre reinforced mortar and concrete – a review of mechanical properties.” Fiber Reinforced Concr. SP-44, ACI, 127–142.
- Kim, J. K., Yi, S. T., & Kim, J. H. J. (2001). “Effect of specimen sizes on flexural compressive strength of concrete.” ACI Structural Journal, 98(3), 416–424.
- Kobayashi, K., & Cho, R. (1982). “Flexural characteristics of steel fiber and polypropylene fiber hybrid reinforced concrete.” Composites, 13, 164–168.
- Larsen, E. T., & Krenchel, H. (1991). “Durability of FRC-Materials. In: Sidney Mindess and Jan Skalny.” In Fiber-reinforced Cementitious Materials: Symposium, Boston, Massachusetts, 1990, Materials Research Society Symposia Proceedings Vol. 211, Materials Research Society, Pittsburgh (pp. 119–124).
- Lawler, J. S., Zampini, D., & Shah, S. P. (2002). “Permeability of cracked hybrid fiber-reinforced mortar under load.” ACI Materials Journal, 99(4), 379–385.
- Mei, G. D., Xu, L. H., Li, S., & Chi, Y. (2012). “Hybrid Effects on Strength of Steel-Polypropylene Hybrid Fiber Reinforced Concrete under Uniaxial and Triaxial Compression.” Applied Mechanics and Materials, 268– 270, 782–787.
- Mette, G., & Aarre, T. (1990). “High-Strength Concrete with Increased Fracture-Toughness.” Symposium O – Fiber-Reinforced Cementitious Materials, 39.
- Mobasher, B., & Li, C. Y. (1996). “Mechanical properties of hybrid cement-based composites.” ACI Materials Journal, 93(3), 284–292.
- Plizzari, G. A., Cangiano, S., & Alleruzzo, S. (1997). “The fatigue behaviour of cracked concrete.” Fatigue and Fracture of Engineering Materials and Structures, 20(8), 1195–1206.
- Qian, C., & Stroeven, P. (2000). “Fracture properties of concrete reinforced with steel - polypropylene hybrid fibres.” Cement and Concrete Composites, 22, 343–351.
- Qian, C. X., & Stroeven, P. (2000). “Development of hybrid polypropylene-steel fibre-reinforced concrete.” Cement and Concrete Research, 30(1), 63–69.
- Ravichandran, A., Suguna, K., & Ragunath, P. N. (2009). “Strength modeling of high-strength concrete with hybrid fibre reinforcement.” American Journal of Applied Sciences, 6(2), 219–223.
- Selina Ruby, G., Geethanjali, C., Varghese, J., & Priya, P. M. (2014). “Influence of hybrid fibre reinforced concrete.” International Journal of Advanced Structures and Geotechnical Engineering.
- Shan, Y., & Liao, K. (2002). “Environmental fatigue behavior and life prediction of unidirectional glass-carbon/epoxy hybrid composites.” International Journal of Fatigue, 24(8), 847–859.
- Skazlić, M. (2009). “Utilization of high performance fiber-reinforced micro-concrete as a repair material.” Civil Engineering, 859–862.
- Skazlić, M., & Bjegović, D. (2009). “Toughness testing of ultra high performance fibre reinforced concrete.” Materials and Structures/Materiaux et Constructions, 42(8), 1025–1038. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-68849097946&partnerID=40&md5=684a9a2435e0d76878f8373a5526600e
- Slowik, V., Plizzari, G. A., & Saouma, V. E. (1996). “Fracture of concrete under variable amplitude fatigue loading.” ACI Materials Journal, 93(3).
- Song, P. S., & Hwang, S. (2004). “Mechanical properties of high-strength steel fiber-reinforced concrete.” Construction and Building Materials, 18(9), 669–673.
- Song, P. S., Wu, J. C., Hwang, S., & Sheu, B. C. (2005). “Statistical analysis of impact strength and strength reliability of steel-polypropylene hybrid fiber-reinforced concrete.” Construction and Building Materials, 19(1), 1–9.
- Sun, W., Chen, H., Luo, X., & Qian, H. (2001). “The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete.” Cement and Concrete Research, 31(4), 595–601.
- Swolfs, Y., Geboes, Y., Gorbatikh, L., & Pinho, S. T. (2017). “The importance of translaminar fracture toughness for the penetration impact behaviour of woven carbon/glass hybrid composites.” Composites Part A: Applied Science and Manufacturing, 103, 1–8.
- Walton, P. L., & Majumdar, a. J. (1975). “Cement-based composites with mixtures of different types of fibres.” Composites, 6(5), 209–216.
- Weiss, W., & Shah, S. (2002). “Restrained shrinkage cracking: the role of shrinkage reducing admixtures and specimen geometry.” Materials and Structures, 35(March), 85–91.
- Wisnom, M. R., Czél, G., Swolfs, Y., Jalalvand, M., Gorbatikh, L., & Verpoest, I. (2016). “Hybrid effects in thin ply carbon/glass unidirectional laminates: Accurate experimental determination and prediction.” Composites Part A: Applied Science and Manufacturing, 88, 131–139.
- Wu, Z., Wang, X., Iwashita, K., Sasaki, T., & Hamaguchi, Y. (2010). “Tensile fatigue behaviour of FRP and hybrid FRP sheets.” Composites Part B: Engineering, 41(5), 396–402.
- Xu, G., & Hannant, D. J. (1992). “Flexural behaviour of combined polypropylene network and glass fibre reinforced cement.” Cement and Concrete Composites, 14(1), 51–61.
- Xu, G., Magnani, S., & Hannant, D. J. (1998). “Durability of hybrid polypropylene-glass fibre cement corrugated sheets.” Cement and Concrete Composites, 20(1), 79–84.
- Xu, L., Huang, L., Chi, Y., & Mei, G. (2016). “Tensile behavior of steel-polypropylene hybrid fiber-reinforced concrete.” ACI Materials Journal, 113(2), 219–229.
- Yao, W., Li, J., & Wu, K. (2003). “Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction.” Cement and Concrete Research, 33(1), 27–30.
- Yazici, H. (2008). “The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze-thaw resistance of self-compacting concrete.” Construction and Building Materials, 22(4), 456–462.
- Yusof, M. A., Mohamad Nor, N., Ismail, A., Choy Peng, N., Mohd Sohaimi, R., & Yahya, M. A. (2013). “Performance of hybrid steel fibers reinforced concrete subjected to air blast loading.” Advances in Materials Science and Engineering, 2013(14), 7 pages.
- Zheng, Z., & Feldman, D. (1995). “Synthetic fibre-reinforced concrete.” Progress in Polymer Science.