References
- ASTM C 143-78, Standard Test Method for Slump Experiment of Concrete.
- ASTM C 136, Standard specification for standard sand, Annual book of ASTM standards.
- ASTM C 418, Standard Test Method for Abrasion Resistance of Concrete by Sandblasting.
- ACI Committee 211. 2009, Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete. American Concrete Institute, USA.
- Ali, I., 2012, New generation adsorbents for water treatment, Chem Rev, 112:5073-5091.
- Ahmad, S., Azad, A.K., Loughlin, K. F., 2005, A study of permeability and tortuosity of concrete, 30th conference on our world in concrete and structures, 45:23-30.
- Al-Amoudi, O.S.B., Maslehuddin, M., Lashari, A.N., Almusallam, A.A., 2003, Effectiveness of corrosion inhibitors in contaminated concrete, Cement and Concrete Composites, 25:439-449.
- BS 1881: Part 116. 1983, Testing concrete: Method for determination of compressive strength of concrete cubes. British Standard Institution, London.
- Benavente, D., Fort, R., Ordóñez, S., 2004, Durability estimation of porous building stones from pore structure and strength, Engineering Geology, 74(1):113-127.
- Bentz, D.P., Stutzman, P.E., 2006, Curing hydration and microstructure of cement paste, ACI Materials Journal, 103(5):348-356.
- Baradan, B., Yazici, H., 2002, Betonarme yapılarda kalıcılık (Durabilite), Izmir: Dokuz Eylu, l University Press.
- ISO 1920-5 Testing of concrete Part 5: Properties of hardened concrete other than strength, Article 5 of this standard specifies the procedure for determination of the depth of penetration of water under pressure.
- Ishida, T., Maekawa, K., Kishi, T., 2007, Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history, Cement and Concrete Research, 37(4): 565-578.
- Kim, Y.Y., Lee, K.M., Bang, J.W., Kwon, S.J., 2014, Effect of w/c ratio on durability and porosity in cement mortar with constant cement amount, Advances in Materials Science and Engineering, Article ID 273460.
- Lorenzo, M.P., Goni, S., Guerrero, A., 2003, Role of aluminous component of fly ash on the durability of Portland cement fly ash pastes in marine environment, Waste Management, 23: 785-792.
- Mehta, P.K., Meryman, H., 2009, Tools for reducing carbon emissions due to cement consumption, Structure magazine, 21:11-15.
- Olivier, J.G.J., Greet, J.M., Peters, J.A.H.W., 2012, Trends in global CO2 emissions 2012 report, PBL Netherlands Environmental Assessment Agency, 14:17-24.
- Shannag, M.J., Shaia, H.A., 2003, Sulfate resistance of high-performance concrete, Cement and Concrete Composites, 25:363-369.
- Wong, H.S., Buenfeld, N.R., 2009, Determining the water-cement ratio, cement content, water content and degree of hydration of hardened cement paste: Method development and validation on paste samples, Cement and Concrete Research, 39(10):957-965.
- Yigiter, H., Yazici, H., Aydın, S., 2007, Effects of cement type, water-cement ratio and cement content on sea water resistance of concrete, Building and Environment, 42:1770-1776.