References
- Cherif C. Textile Werkstoffe für den Leichtbau. Berlin, Heidelberg: Springer Berlin Heidelberg; 2011.
- Schegner P, Fazeli M, Sennewald C, Hoffmann G, Cherif C. Technology Development for Direct Weaving of Complex 3D Nodal Structures. Appl Compos Mater 2019; 26(1):423–32.
- Safran. LEAP-1C engine for single-aisle commercial jets; 05.25.2021 [cited 2022 Feb 11]. Available from: URL: https://www.safran-group.com/products-services/leap-1c-new-generation-engine-single-aisle-commercial-jets.
- Corbin AC, Kececi A, Boussu F, Ferreira M, Soulat D. Engineering Design and Mechanical Property Characterisation of 3D Warp Interlock Woven Fabrics. Applied Composite Materials 2018; 25(4):811–22. Available from: URL: https://doi.org/10.1007/s10443-018-9715-z.
- Maqsood M, Hussain T, Nawab Y, Shaker K, Umair M. Prediction of warp and weft yarn crimp in cotton woven fabrics. The Journal of The Textile Institute 2015; 106(11):1180–9.
- Umair M, Nawab Y, Malik MH, Shaker K. Development and characterization of three-dimensional woven-shaped preforms and their associated composites. Journal of Reinforced Plastics and Composites 2015; 34(24):2018–28.
- Archer E, Buchanan S, McIlhagger AT, Quinn JP. The effect of 3D weaving and consolidation on carbon fiber tows, fabrics, and composites. Journal of Reinforced Plastics and Composites 2010; 29(20):3162–70.
- Li M, Wang P, Boussu F, Soulat D. Investigation of the Strength Loss of HMWPE Yarns During Manufacturing Process of 3D Warp Interlock Fabrics. Applied Composite Materials 2021.
- Lefebvre M, Francois B, Daniel C. Influence of high-performance yarns degradation inside three-dimensional warp interlock fabric. Journal of Industrial Textiles 2013; 42(4):475–88.
- Gloy Y, Renkens W, Herty M, Gries T. Simulation and Optimisation of Warp Tension in the Weaving Process. J Textile Sci Eng 2015; 05(01).
- Bessette C, Decrette M, Tourlonias M, Osselin J-F, Charleux F, Coupé D et al. In-situ measurement of tension and contact forces for weaving process monitoring: Application to 3D interlock. Composites Part A: Applied Science and Manufacturing 2019; 126:105604.
- Vorhof M, Weise D, Sennewald C, Hoffmann G. New method for warp yarn arrangement and algorithm for pattern conversion for three-dimensional woven multilayered fabrics. Journal of Industrial Textiles 2018; 45:152808371881353.
- EAT GmbH “The DesignScope Company”. 3DWeave Comp [cited 2022 Apr 11]. Available from: URL: https://www.designscopecompany.com/3dweave-comp/.
- Yang X, Fan W, Ge S, Gao X, Wang S, Zhang Y et al. Advanced textile technology for fabrication of ramie fiber PLA composites with enhanced mechanical properties. Industrial Crops and Products 2021; 162:113312.
- Jabbar M, Shaker K, Nawab Y, Umair M. Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites. Composite Structures 2021; 269:114023.
- Abtew MA, Boussu F, Bruniaux P, Loghin C, Cristian I, Chen Y et al. Ballistic impact performance and surface failure mechanisms of two-dimensional and three-dimensional woven p-aramid multi-layer fabrics for lightweight women ballistic vest applications. Journal of Industrial Textiles 2021; 50(9):1351–83.
- Corbin A-C, Boussu F, Ferreira M, Soulat D. Influence of 3D warp interlock fabrics parameters made with flax rovings on their final mechanical behaviour. Journal of Industrial Textiles 2020; 49(9):1123–44.
- Li M, Wang P, Boussu F, Soulat D. A review on the mechanical performance of three-dimensional warp interlock woven fabrics as reinforcement in composites. Journal of Industrial Textiles 2020:152808371989438.
- Kashif M, Hamdani, Syed Talha Ali, Nawab Y, Asghar MA, Umair M, Shaker K. Optimization of 3D woven preform for improved mechanical performance. Journal of Industrial Textiles 2018; 48(7):1206–27.
- Weise D, Vorhof M, Unger R, Hoffmann G, Cherif C. Studying the influence of different carbon-fibre-reinforced polymer patches on the mechanical properties of carbon-fibre-reinforced polymer composite. Journal of Industrial Textiles 2018; 48(3):539–58.
- Internationale Organisation für Normung. Fibre-reinforced plastic composites - Determination of flexural properties.
- Internationale Organisation für Normung. Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content.
- Internationale Organisation für Normung. Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification.