Have a personal or library account? Click to login
Experimental and Numerical Stress State Assesment in Refill Friction Stir Spot Welding Joints Cover

Experimental and Numerical Stress State Assesment in Refill Friction Stir Spot Welding Joints

Fatigue of Aircraft Structures
Volume 2021 (2021): Issue 13 (December 2021)
By: Elżbieta Gadalińska,  Andrzej Kubit,  Tomasz Trzepieciński and  Grzegorz Moneta  
Open Access
|Jul 2022

References

  1. [1] Schilling, C. and dos Santos, J. (2004). “Method and device for joining at least two adjoining work pieces by friction welding,” US6722556B2, Apr. 20, 2004 Accessed: Nov. 28, 2020. [Online]. Available: https://patents.google.com/patent/US6722556B2/en.
    Search in Google ScholarBack to article
  2. [2] Dong, Z., Hu, W., Ai, X. and Lv, Z. (2019). Effect of Rotation Speed on Intermetallic Compounds and Failure Load of RFSSW-ed Dissimilar Al/Mg. Trans Indian Inst Met, 72(9), 2249–2256, doi: 10.1007/s12666-019-01672-6.
    Open DOISearch in Google ScholarBack to article
  3. [3] Cao, J.Y., Wang, M., Kong, L., Zhao, H.X. and Chai, P. (2017). Microstructure, texture and mechanical properties during refill friction stir spot welding of 6061-T6 alloy. Materials Characterization, 128, 54–62, doi: 10.1016/j.matchar.2017.03.023.
    Open DOISearch in Google ScholarBack to article
  4. [4] Jambhale, S., Kumar, S. and Kumar, S. (2020). A Novel Flat Friction Stir Spot Welding of Triple Sheet Dissimilar Aluminium Alloys: Analyzing Mechanical Properties and Residual Stresses at Weld Region. Trans Indian Inst Met, 73(9), 2205–2220, doi: 10.1007/s12666-020-02025-4.
    Open DOISearch in Google ScholarBack to article
  5. [5] Lin, S., Deng, Y.L., Lin, H.Q. et al. (2018). Microstructure, mechanical properties and stress corrosion behavior of friction stir welded joint of Al–Mg–Si alloy extrusion. Rare Met., doi: 10.1007/s12598-018-1126-7.
    Open DOISearch in Google ScholarBack to article
  6. [6] Li, G., Zhou, L., Luo, L., Wu, X. and Guo, N. (2019). Microstructural evolution and mechanical properties of refill friction stir spot welded alclad 2A12-T4 aluminum alloy. Journal of Materials Research and Technology, 8(5), 4115–4129, doi: 10.1016/j.jmrt.2019.07.021.
    Open DOISearch in Google ScholarBack to article
  7. [7] Wang, S. et al., (2020). Strengthening and toughening mechanisms in refilled friction stir spot welding of AA2014 aluminum alloy reinforced by graphene nanosheets. Materials & Design, 186, 108212, doi: 10.1016/j.matdes.2019.108212.
    Open DOISearch in Google ScholarBack to article
  8. [8] Kubit, A., Trzepiecinski, T., Faes, K., Drabczyk, M., Bochnowski, W. and Korzeniowski, M. (2019). Analysis of the effect of structural defects on the fatigue strength of RFSSW joints using C-scan scanning acoustic microscopy and SEM. Fatigue & Fracture of Engineering Materials & Structures, 42(6), 1308–1321, doi: 10.1111/ffe.12984.
    Open DOISearch in Google ScholarBack to article
  9. [9] Kluz, R., Kubit, A. and Wydrzyński, D. (2018). The Effect of Plunge Depth on the Strength Properties of Friction Welded Joints Using the RFSSW Method. Adv. Sci. Technol. Res. J., 12(1), 41–47, doi: 10.12913/22998624/76547.
    Open DOISearch in Google ScholarBack to article
  10. [10] Kubit, A., Trzepiecinski, T., Bochnowski, W., Drabczyk, M. and Faes, K. (2019). Analysis of the mechanism of fatigue failure of the Refill Friction Stir Spot Welded overlap joints. Archives of Civil and Mechanical Engineering, 19(4), 1419–1430, doi: 10.1016/j.acme.2019.09.004.
    Open DOISearch in Google ScholarBack to article
  11. [11] Jedrasiak, P. and Shercliff, H.R. (2019). Small strain finite element modelling of friction stir spot welding of Al and Mg alloys. Journal of Materials Processing Technology, 263, 207–222, doi: 10.1016/j.jmatprotec.2018.07.031.
    Open DOISearch in Google ScholarBack to article
  12. [12] Meyghani, B., Awang, M.B., Emamian, S.S., Mohd Nor, M.K.B. and Pedapati, S.R. (2017). A Comparison of Different Finite Element Methods in the Thermal Analysis of Friction Stir Welding (FSW). Metals, 7(10), 450, doi: 10.3390/met7100450.
    Open DOISearch in Google ScholarBack to article
  13. [13] Meyghani, B., Awang, M. and Wu, C.S. (2020). Finite element modeling of friction stir welding (FSW) on a complex curved plate. Journal of Advanced Joining Processes, 1, 100007, doi: 10.1016/j.jajp.2020.100007.
    Open DOISearch in Google ScholarBack to article
  14. [14] Yu, M., Li, W.Y., Li, J.L. and Chao, Y.J. (2012). Modelling of entire friction stir welding process by explicit finite element method. Materials Science and Technology, 28(7), 812–817, doi: 10.1179/1743284711Y.0000000087.
    Open DOISearch in Google ScholarBack to article
  15. [15] He, X., Gu, F. and Ball, A. (2014). A review of numerical analysis of friction stir welding. Progress in Materials Science, 65, 1–66, doi: 10.1016/j.pmatsci.2014.03.003.
    Open DOISearch in Google ScholarBack to article
  16. [16] Yunus, M. and Alsoufi, M.S. (2018). Mathematical Modelling of a Friction Stir Welding Process to Predict the Joint Strength of Two Dissimilar Aluminium Alloys Using Experimental Data and Genetic Programming. Modelling and Simulation in Engineering, 2018. https://www.hindawi.com/journals/mse/2018/4183816/ (accessed Nov. 30, 2020).10.1155/2018/4183816
    Search in Google ScholarBack to article
  17. [17] Yang, H., Yang, H. and Hu, X. (2015).Simulation on the plunge stage in refill friction stir spot welding of Aluminum Alloys. In Proceedings of the 4th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering 2015. doi: 10.2991/icmmcce-15.2015.105.
    Open DOISearch in Google ScholarBack to article
  18. [18] Cao, J.Y., Wang, M., Kong, L., Yin, Y.H. and Guo, L.J. (2017). Numerical modeling and experimental investigation of material flow in friction spot welding of Al 6061-T6. Int J Adv Manuf Technol, 89(5), 2129–2139, doi: 10.1007/s00170-016-9247-3.
    Open DOISearch in Google ScholarBack to article
  19. [19] D’Urso, G. and Giardini, C. (2016). Thermo-Mechanical Characterization of Friction Stir Spot Welded AA7050 Sheets by Means of Experimental and FEM Analyses. Materials, 9(8), 689, doi: 10.3390/ma9080689.551235528773810
    Open DOISearch in Google ScholarBack to article
  20. [20] D’Urso, G. (2015). Thermo-mechanical characterization of friction stir spot welded AA6060 sheets: Experimental and FEM analysis. Journal of Manufacturing Processes, 17, 108–119, doi: 10.1016/j.jmapro.2014.08.004.
    Open DOISearch in Google ScholarBack to article
  21. [21] Malik, V., Sanjeev, N.K., Hebbar, H.S. and Kailas, S.V. (2014). Finite Element Simulation of Exit Hole Filling for Friction Stir Spot Welding – A Modified Technique to Apply Practically. Procedia Engineering, 97, 1265–1273, doi: 10.1016/j.proeng. 2014.12.405.
    Open DOISearch in Google ScholarBack to article
  22. [22] Yang, X. et al. (2018). Numerical modelling and experimental investigation of thermal and material flow in probeless friction stir spot welding process of Al 2198-T8. Science and Technology of Welding and Joining, 23(8), 704–714, doi: 10.1080/13621718.2018. 1469832.
    Open DOISearch in Google ScholarBack to article
  23. [23] Atharifar, H., Lin, D. and Kovacevic, R. (2009). Numerical and Experimental Investigations on the Loads Carried by the Tool During Friction Stir Welding. J. of Materi Eng and Perform, 18(4), 339–350, doi: 10.1007/s11665-008-9298-1.
    Open DOISearch in Google ScholarBack to article
  24. [24] Chen, G., Shi, Q. and Zhang, S. (2018). Recent Development and Applications of CFD Simulation for Friction Stir Welding. In Laurentiu Nastac, Koulis Pericleous, Adrian S. Sabau, Lifeng Zhang, Brian G. Thomas (Eds.) CFD Modeling and Simulation in Materials Processing 2018, (113–118), Springer, doi: 10.1007/978-3-319-72059-3_11.
    Open DOISearch in Google ScholarBack to article
  25. [25] Muci-Küchler, K.H., Kalagara, S. and Arbegast, W.J. (2010). Simulation of a Refill Friction Stir Spot Welding Process Using a Fully Coupled Thermo-Mechanical FEM Model. J. Manuf. Sci. Eng, 132(1), doi: 10.1115/1.4000881.
    Open DOISearch in Google ScholarBack to article
  26. [26] Kubit, A. and Trzepiecinski, T. (2020). A fully coupled thermo-mechanical numerical modelling of the refill friction stir spot welding process in Alclad 7075-T6 aluminium alloy sheets. Archiv. Civ. Mech. Eng, 20(4), 117, doi: 10.1007/s43452-020-00127-w.
    Open DOISearch in Google ScholarBack to article
  27. [27] Borino, G., Fratini, L. and Parrinello, F. (2009). Mode I failure modeling of friction stir welding joints. Int J Adv Manuf Technol, 41(5), 498–503, doi: 10.1007/s00170-008-1498-1.
    Open DOISearch in Google ScholarBack to article
  28. [28] Venukumar, S. Yalagi, S. and Muthukumaran, S. (2013). Comparison of microstructure and mechanical properties of conventional and refilled friction stir spot welds in AA 6061-T6 using filler plate. Transactions of Nonferrous Metals Society of China, 23(10), 2833–2842, doi: 10.1016/S1003-6326(13)62804-6.
    Open DOISearch in Google ScholarBack to article
  29. [29] Rosendo, T. et al. (2011). Mechanical and microstructural investigation of friction spot welded AA6181-T4 aluminium alloy. Materials & Design, 32(3), 1094–1100, doi: 10.1016/j.matdes.2010.11.017.
    Open DOISearch in Google ScholarBack to article
DOI: https://doi.org/10.2478/fas-2021-0006 | Journal eISSN: 2300-7591 | Journal ISSN: 2081-7738
Journal RSS Feed
Language: English
Page range: 54 - 71
Published on: Jul 28, 2022
Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
RFSSW,
X-ray diffraction,
finite elements modelling,
stress state,
aluminium alloys
Related subjects:
Engineering,
Introductions and overviews,
Engineering, other

© 2022 Elżbieta Gadalińska, Andrzej Kubit, Tomasz Trzepieciński, Grzegorz Moneta, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 2021 (2021): Issue 13 (December 2021)Next article