References
- [1] Trosch, T., Strößner, J., Völkl, R., Glatzel, U. (2016). Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting. Mater Letters, 164, 428-431. DOI: 10.1016/j.matlet.2015.10.136.
- [2] Strößner, J.,Terock, M., Glatzel, U. (2015). Mechanical and microstructural investigation of nickel-based superalloy IN718 manufactured by selective laser melting (SLM), Advanced Engineering Materials, 17(8), 1099-1105. DOI: 10.1002/adem.201500158.
- [3] Li, X., Shi, J.J., Cao, G.H., Russell, A.M., Zhou, Z.J., Li, C.P., Chen, G.F. (2019). Improved plasticity of Inconel 718 superalloy fabricated by selective laser melting through a novel heat treatment process, Materials and Design, 18, 107915. DOI: 10.1016/j.matdes.2019.107915.
- [4] Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion. ASTM F3055-14a.
- [5] Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing. ASTM F2971-13.
- [6] Standard Test Methods for Tension Testing of Metallic Materials. ASTM E8/E8M-16a.
- [7] Liu, F., Lin, X., Leng, H., Cao, J. Liu, Q., Huang, Ch., Huang, W. (2013). Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction, Optics&Laser Technology, 45, 330-335. DOI: 10.1016/j.optlastec.2012.06.028.
- [8] Raza, T., Andresson, J., Svensson, L-E. (2018). Microstructure of Selective Laser Melted Alloy 718 in As-Manufactured and Post Heated Treated Condtition, Procedia Manufacturing, 25, 450-458. DOI: 10.1016/j.promfg.2018.06.100.
- [9] Amato, K.N., Gaytan, S.M., Murr, L.E., Martinez, E., Shindo, P.W., Hernandez, J., Collins, S., Medina, F. (2012). Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser metling, Acta Materialia, 60(5), 2229-2239. DOI: 10.1016/j.actamat.2011.12.032.
- [10] Lu, Y., Wu, S., Gan,Y., Huang, T., Yang, Ch., Junjie, L., Lin, J. (2015). Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy, Optics&Laser Technology, 75, 197-206. DOI: 10.1016/j.optlastec.2015.07.009.