References
- [1] S. J. Findlay and N. D. Harrison, ‘Why aircraft fail’, Mater. Today, vol. 5, no. 11, pp. 18–25, Nov. 2002.
- [2] R. P. G. Müller and L. J. Hart-Smith, ‘Making fuselage riveted lap splices with 200-year crack-free-lives’, in Fatigue in New and Aging Aircraft, Edinburgh, Scotland, 1997, pp. 18–20.
- [3] M. Skorupa, A. Skorupa, T. Machniewicz, and A. Korbel, ‘Effect of production variables on the fatigue behaviour of riveted lap joints’, Int. J. Fatigue, vol. 32, no. 7, pp. 996–1003, Jul. 2010.
- [4] A. Lipski, ‘The Influence of The Degree of the Rivet Hole Sizing on the Fatigue Life’, Fatigue Aircr. Struct., vol. 2012, no. 4, pp. 64–69, 2012.
- [5] R. P. G. Müller, ‘An experimental and analytical investigation on the fatigue behaviour of fuselage riveted lap joints’, Delft University of Technology, Delft, 1995.
- [6] A. Skorupa and M. Skorupa, Riveted Lap Joints in Aircraft Fuselage: Design, Analysis and Properties, 2012th ed. Dordrecht; New York: Springer, 2012.
- [7] J. J. Homan and A. A. Jongebreur, ‘Calculation method for Predicting the Fatigue Life of Riveted Joints’, in Durability and structural integrity of airframes, Stockholm, Sweden, 1993, vol. 1, pp. 175–190.
- [8] W. Wronicz and J. Kaniowski, ‘Experimental and Numerical Study of Strain Progress During and After Riveting Process for Brazier Rivet and Rivet with Compensator - Squeezing Force and Rivet Type Effect’, Fatigue Aircr. Struct., vol. 2011, no. 3, pp. 166–190, 2011.
- [9] W. Wronicz, ‘Comparison of Residual Stress State on Sheets Faying Surface after Standard and NACA Riveting-Numerical Approach’, Fatigue Aircr. Struct., vol. 2016, no. 8, pp. 116–126, 2016.
- [10] W. Wronicz, J. Kaniowski, M. Malicki, P. Kucio, and R. Klewicki, ‘Experimental and numerical study of NACA and conventional riveting procedure’, Fatigue Aircr. Struct., vol. 2017, no. 9, pp. 157–170, 2017.
- [11] J. Fárek, ‘FE-Modelling Methodology of Riveted Joints’, Czech Aerosp. Proc. J. Czech Aerosp. Res., vol. 2010, no. 3, pp. 12–16, 2010.