Verification of the Computed Tomography Results of Aluminum Alloy Welded Joint

Maciej Malicki; Kamil Sobczak

doi:10.2478/fas-2018-0004

.blurhash-client-img { display: none !important; }

Verification of the Computed Tomography Results of Aluminum Alloy Welded Joint

Fatigue of Aircraft Structures

Volume 2018 (2018): Issue 10 (December 2018)

By: Maciej Malicki and Kamil Sobczak

Open Access

|Jun 2019

Abstract

Computed tomography (CT) of aluminum welded joint specimen has been performed. On the tomographic cross sections some defects have been found. To verify them the metallography cross sections of welded has been done. It was found that selected defects are micro cracks.

References

[1] R.F. Hamade , A.M.R. Baydoun, Nondestructive detection of defects in friction stir welded lap joints using computed tomography, Materials and Design 162 (2019) 10–23.10.1016/j.matdes.2018.11.034
Search in Google Scholar Back to article
[2] ECSS Standard - ECSS-Q-ST-70-39C „Welding of metallic materials for light hardware”, ECSS Executive Secretariat, ECSS Technical Authority, 1 Maj 201510.1007/978-3-642-27833-4_481-3
Search in Google Scholar Back to article
[3] Tomographic and metallographic tests protocol, CBMK/LM2/21935/06/ 1/2017, Institute of Aviation, CBMM Archives.
Search in Google Scholar Back to article
[4] N. Coniglio, C.E. Cross, I. Dörfel, W. Österle, Phase formation in 6060/4043 aluminum weld solidification, Materials Science and Engineering A 517 (2009) 321–327.10.1016/j.msea.2009.03.087
Search in Google Scholar Back to article
[5] W. Boonchouytan, J. Chatthong, S. Rawangwong, R. Burapa, Effect of Heat Treatment T6 on the Friction Stir Welded SSM 6061 Aluminum Alloys, Energy Procedia 56 (2014) 172 – 180.10.1016/j.egypro.2014.07.146
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/fas-2018-0004 | Journal eISSN: 2300-7591

Journal RSS Feed

Language: English

Page range: 47 - 52

Published on: Jun 28, 2019

Published by: ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

computed tomography (CT),

welded joints,

defects,

micro cracks

Related subjects:

Engineering,

Introductions and overviews,

Engineering, other

© 2019 Maciej Malicki, Kamil Sobczak, published by ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF AVIATION
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 2018 (2018): Issue 10 (December 2018)