References
- [1] A. Baczmański, “Stress fields in polycrystalline materials studied using diffraction and self-consistent modeling,” postdoctoral dissertation, AGH-University of Science and Technology, Kraków, 2005.
- [2] A. Baczmański and C. Braham, “Elastoplastic properties of duplex steel determined using neutron diffraction and self-consistent model,” Acta Materialia, vol. 52, no. 5, pp. 1133–1142, Mar. 2004.
- [3] E. Gadalińska, “Micromechanical properties and stresses in two-phase poly-crystalline materials studied using diffraction and self-consistent model,” Doctoral Thesis, AGH - University of Science and Technology, Kraków, 2018.
- [4] A. Maciejny, “Mechanizm umocnienia kompozytów,” Krzepnięcie metali i stopów. Krystalizacja i własności kompozytów odlewanych., vol. 7, pp. 335–353, 1984.
- [5] R. J. McElroy and Z. C. Szkopiak, “Dislocation–Substructure–Strengthening and Mechanical–Thermal Treatment of Metals,” International Metallurgical Reviews, vol. 17, no. 1, pp. 175–202, Jan. 1972.
- [6] M. Rozmus-Górnikowska, “Umocnienie wydzieleniowe stopu Al z Cu +umocnienie stali,” Kraków.
- [7] T. W. Clyne and P. J. Withers, An Introduction to Metal Matrix Composites. Cambridge University Press, 1993.
- [8] R. J. Arsenault and N. Shi, “Dislocation generation due to differences between the coefficients of thermal expansion,” Materials Science and Engineering, vol. 81, pp. 175–187, Aug. 1986.
- [9] R. J. Arsenault, L. Wang, and C. R. Feng, “Strengthening of composites due to microstructural changes in the matrix,” Acta Metallurgica et Materialia, vol. 39, no. 1, pp. 47–57, Jan. 1991.
- [10] S. B. Prabu, L. Karunamoorthy, S. Kathiresan, and B. Mohan, “Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite,” Journal of Materials Processing Technology, vol. 171, no. 2, pp. 268–273, Jan. 2006.
- [11] K. Suryanarayanan, R. Praveen, and S. Raghuraman, “Silicon carbide reinforced aluminium metal matrix composites for aerospace applications: a literature review,” International Journal of Innovative Research in Science, Engineering and Technology, vol. 2, no. 11, pp. 6336–6344, 2013.
- [12] S. H. Avner, Introduction to physical metallurgy. New York: McGraw-Hill, 1964.
- [13] Y. Lakhtin and N. Weinstein, Engineering physical metallurgy. University Press of the Pacific, 2000.
- [14] M. M. Boopathi, K. P. Arulshri, and N. Iyandurai, “Evaluation of mechanical properties of aluminium alloy 2024 reinforced with silicon carbide and fly ash hybrid metal matrix composites,” American Journal of Applied Sciences, vol. 10, no. 3, pp. 219–229, 2013.
- [15] S. V. S. Narayana Murty, B. Nageswara Rao, and B. P. Kashyap, “On the hot working characteristics of 6061Al–SiC and 6061–Al2O3 particulate reinforced metal matrix composites,” Composites Science and Technology, vol. 63, no. 1, pp. 119–135, Jan. 2003.
- [16] M. E. Fitzpatrick, “A study of the effects of a quench residual stress field on fatigue in an Al/SiCp metal matrix composite,” University of Cambridge, 1995.
- [17] F. Xu, J. Zhang, Y. Deng, and X. Zhang, “Precipitation orientation effect of 2124 aluminum alloy in creep aging,” Transactions of Nonferrous Metals Society of China, vol. 24, no. 7, pp. 2067–2071, Jul. 2014.