References
- [1] K. I. Wong and T. U. Siaw, “PLC and SCADA Laboratory Experiments for a Final Year Instrumentation Course,” Int. J. Inf. Educ. Technol., vol. 5, no. 11, pp. 865–868, 2015. https://doi.org/10.7763/IJIET.2015.V5.62810.7763/IJIET.2015.V5.628
- [2] E. R. Alphonsus and M. O. Abdullah, “A review on the applications of programmable logic controllers (PLCs),” Renew. Sustain. Energy Rev., vol. 60, pp. 1185–1205, 2016. https://doi.org/10.1016/j.rser.2016.01.02510.1016/j.rser.2016.01.025
- [3] X. Yu and C. Singh, “A practical approach for integrated power system vulnerability analysis with protection failures,” IEEE Trans. Power Syst., vol. 19, no. 4, pp. 1811–1820, 2004. https://doi.org/10.1109/TPWRS.2004.83565610.1109/TPWRS.2004.835656
- [4] C. P. Janssen, S. F. Donker, D. P. Brumby, and A. L. Kun, “History and future of human-automation interaction,” Int. J. Hum. Comput. Stud., vol. 131, pp. 99–107, 2019. https://doi.org/10.1016/j.ijhcs.2019.05.00610.1016/j.ijhcs.2019.05.006
- [5] IEEE Standard for SCADA and Automation Systems, IEEE Std C37.1-2007, vol. 23, no. 6, 2007.
- [6] C. Lin, X. Min, and J. Junru, “Exploration on Educational Reform of Electrical Engineering and Automation Professional,” 2019 Asia-Pacific Conference on Advance in Education, Learning and Teaching (ACAELT 2019), pp. 1321–1325, 2019.
- [7] B. Ram and D. N. Vishwakarma, Power System Protection and Switchgear. McGraw-Hill Professional Publishing, 2011.
- [8] M. Eremia and M. Shahidehpour, Handbook of Electrical Power System Dynamics: Modeling, Stability, and Control. The Institute of Electrical and Electronics Engineers, Inc., 2013. https://doi.org/10.1002/978111851607210.1002/9781118516072
- [9] M. S. Thomas, P. Kumar, and V. K. Chandna, “Design, development, and commissioning of a supervisory control and data acquisition (SCADA) laboratory for research and training,” IEEE Trans. Power Syst., vol. 19, no. 3, pp. 1582–1588, 2004. https://doi.org/10.1109/TPWRS.2004.82677010.1109/TPWRS.2004.826770
- [10] J. F. M. valter Pinto, Silviano Rafeal, “PLC controlled industrial processes on-line simulator,” IEEE Int. Symp. Ind. Electrnics, 4–7 June, 2007. https://doi.org/10.1109/ISIE.2007.437508410.1109/ISIE.2007.4375084
- [11] D. Li, Y. Serizawa, and M. Kiuchi, “Concept design for a Web-based Supervisory Control and Data-Acquisition (SCADA) system,” Proc. IEEE Power Eng. Soc. Transm. Distrib. Conf., vol. 1, ASIA PACIFIC, pp. 32–36, 2002.
- [12] R. Bayindir and Y. Cetinceviz, “A water pumping control system with a programmable logic controller (PLC) and industrial wireless modules for industrial plants-An experimental setup,” ISA Trans., vol. 50, no. 2, pp. 321–328, 2011. https://doi.org/10.1016/j.isatra.2010.10.00610.1016/j.isatra.2010.10.00621126739
- [13] J. L. Vazquez-Gonzalez, J. Barrios-Aviles, A. Rosado-Muñoz, and R. Alejos-Palomares, “An industrial automation course: Common infrastructure for physical, virtual and remote laboratories for PLC programming,” Int. J. Online Biomed. Eng., vol. 14, no. 8, pp. 4–19, 2018. https://doi.org/10.3991/ijoe.v14i08.875810.3991/ijoe.v14i08.8758
- [14] D. Cousineau, D. Mentré, and H. Inoue, “Automated deductive verification for ladder programming,” Proceedings F-IDE 2019, EPTCS, vol. 310, pp. 7–12, 2019. https://doi.org/10.4204/EPTCS.310.210.4204/EPTCS.310.2
- [15] H. A. Abbas, “Future SCADA challenges and the promising solution: The agent-based SCADA,” Int. J. Crit. Infrastructures, vol. 10, no. 3/4, pp. 307–333, 2014. https://doi.org/10.1504/IJCIS.2014.06635410.1504/IJCIS.2014.066354
- [16] R. K. Chauhan, M. L. Dewal, and K. Saini, “Utility of SCADA in power generation and distribution system,” Proc. 2010 3rd IEEE Int. Conf. Comput. Sci. Inf. Technol. ICCSIT 2010, vol. 6, pp. 648–652, 2010.
- [17] T. Adams, “SCADA System Fundamentals,” Course No: E01-007, pp. 3–5, 2014.
- [18] R. Slusariuc, L. Samoila, G. Popescu and A. D. Handra, “SCADA Systems Analysis For Industrial Procesess,” Annals of the University of Petrosani, Electrical Engineering, vol. 21, pp. 17–22, 2019.
- [19] H. Salih, H. Abdelwahab, and A. Abdallah, “Automation design for a syrup production line using Siemens PLC S7-1200 and TIA Portal software,” Proc. 2017 Int. Conf. Commun. Control. Comput. Electron. Eng. ICCCCEE 2017, pp. 5–9, 2017. https://doi.org/10.1109/ICCCCEE.2017.786670210.1109/ICCCCEE.2017.7866702
- [20] S. L. Jämsä-Jounela, “Future trends in process automation,” IFAC Proc. Vol., vol. 40, no. 1, pp. 1–10, 2007. https://doi.org/10.3182/20070213-3-CU-2913.0000310.3182/20070213-3-CU-2913.00003
- [21] S. SIMATIC, “S7-1200 Easy Book,” pp. 1–454, 2015.
- [22] L. Prenzel and J. Provost, “PLC Implementation of Symbolic, Modular Supervisory Controllers,” IFAC-PapersOnLine, vol. 51, no. 7, pp. 304–309, 2018. https://doi.org/10.1016/j.ifacol.2018.06.31710.1016/j.ifacol.2018.06.317