Modern Non-Destructive Testing Methods in Monitoring Drive Systems of Belt Conveyors: Review and Comparative Analysis
References
- Afonso Bowler, V., Cordioli, H. A., Silva, D., & Braga, D. (2024). Bearing fault detection in conveyor belt drums using machine learning. PHM Society Annual Conference Proceedings, 16(1). DOI: 10.36001/phmconf.2024.v16i1.4065
- Alberti, L., & Troncon, D. (2021). Design of electric motors and drive systems according to efficiency standards. IEEE Transactions on Industrial Electronics, 68(10), 9287–9296. DOI: 10.1109/TIE.2020.3020028
- Amer, A. K., Nabhan, A., El-Sharkawi, M. R., & Rashed, A. (2021). Dynamic model analysis for unsteady operating of double V-belt drive system. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(14), 2950–2963. DOI: 10.17762/turcomat.v12i14.10822
- Blazej, R., Yurdziak, L., & Zheshovska, A. (2025). Sensor-based diagnostics for conveyor belt condition monitoring and preventive maintenance. Sensors, 25(11), Artykuł 3459. DOI: 10.3390/s25113459
- Bortnovski, P., Gladyshevich, A., Gladyshevich, L., Korol, R., & Okraska, I. M. (2022). Intermediate TT drive conveyor with power transmission on return belt. Energies, 15(16), Artykuł 6062. DOI: 10.3390/en15166062
- Boslovyak, P. V., & Tolkachev, E. N. (2019). Optimization of metallic structure of drive suspension of special belt conveyor. IFAC-PapersOnLine, 52(25), 198–202. DOI: 10.1016/j.ifacol.2019.12.472
- Farhat, M. H., Gelman, L., Abdullahi, A. O., Ball, A., Conaghan, G., & Kluis, W. (2023). Early detection of mis-tracking in conveyor belt systems using CCSM3 spectral MCSA method. Sensors, 23(7), Artykuł 3652. DOI: 10.3390/s23073652
- Feng, Y., Zhang, M., & Meng, G. (2019). Dynamic characteristics analysis and optimization of commissioning of intermediate drive belt conveyor with uneven load. Science Progress, 103(1), Artykuł 0036850419881089. DOI: 10.1177/0036850419881089
- Galkin, V. I., & Sheshko, E. E. (2017). Belt conveyors at the current stage of development of mining equipment. Mining Magazine, (9), 85–89. DOI: 10.17580/gzh.2017.09.15
- Gelman, L., Abdullahi, A. O., Moshrefzade, A., Ball, A., Conaghan, G., & Cluis, W. (2023). Innovative conveyor belt monitoring using current signals. Electronics, 12(8), Artykuł 1804. DOI: 10.3390/electronics12081804
- Goncharov, K. A. (2022). Thermal diagnostics system for belt conveyors. Scientific and Technical Bulletin of Bryansk State University, (1), 27–37. DOI: 10.22281/2413-9920-2022-08-01-27-37
- Hazai, M., Banakar, A., Gobadian, B., Mirsalim, M. A., & Minai, S. (2020). Remaining useful life (RUL) prediction of timing belt of IC engine based on vibration signals and artificial neural network. Neural Computing & Applications, 33, 7785–7801. DOI: 10.1007/s00521-020-05520-3
- Hills, P. W. (2024). Condition monitoring keeps conveyors conveying. Beltcon. https://www.beltcon.org.za/wp-content/uploads/2024/12/B15-19-Hills-CM-Keeps-Conveyors-Conveying.pdf
- Justrov, K., & Iliev, Z. (2022). Study of electromechanical load of motor-gear group of two-drum drive of belt conveyor. Journal of Physics: Conference Series, 2339(1), Artykuł 012028. DOI: 10.1088/1742-6596/2339/1/012028
- Khalifa, R. M., Yakut, S., Bassetto, S., & Shaban, Y. (2024). Condition monitoring and belt drive system warning using residual control diagram logical regression analysis. Structural Health Monitoring, 24(3). DOI: 10.1177/14759217241252046
- Kiselev, B. R., & Kolobov, M. Yu. (2019). Belt conveyor. Calculation and design of main units: Textbook. Ivanovo State Chemical-Technological University. https://www.isuct.ru/sites/default/files/department/ightu/ktmio/36.pdf
- Kosh, L. K., Kozlov, L. G., Piontkevich, O. V., Gromashek, K., & Mussabekova, A. (2018). Study of dynamic stability of adaptive belt conveyor drive. Proceedings of SPIE, 10808, Artykuł 1080862. DOI: 10.1117/12.2501535
- Kozhubaev, Y., Novak, D., Karpukhin, V., Ershov, R., & Chen, H. (2025). Study of monitoring and control systems for electric drives of belt conveyors. Automation, 6(3), 34–40. DOI: 10.3390/automation6030034
- Kulikov, A. P., Kaverin, V., & Mosavi, A. (2024). Modeling of electric conveyor drive using Simulink Matlab & IoT (SAMI). SAMI Conference Proceedings. DOI: 10.1109/SAMI60510.2024. 10432904
- Kulikov, A. P., Kaverin, V., & Zyuzev, A. (2023). Optimization of the operation of a two-motor asynchronous frequency-controlled electric drive of the main belt conveyor in the starting mode. International Journal on Energy Conversion (IRECON), 11(5), 170–182. DOI: 10.15866/irecon.v11i5.24158
- Kuzin, E. G. (2023). Predictive control of technical condition of mining transport machines. Mining Equipment and Electromechanics, (1), 41–49. DOI: 10.26730/1816-4528-2023-1-41-49
- Kuzin, E. G., Gerike, B. L., & Zakharov, A. Y. (2024). Models of the limit state of drive stations of belt conveyors. Mining Information and Analytical Bulletin, (8), 92–107. DOI: 10.25018/0236_1493_2024_8_0_92
- Kuzin, E. G., Mamaeva, M. S., & Komarov, D. S. (2025). Predictive maintenance of lubricating oil. Mining Equipment and Electromechanics, (3), 48–60. DOI: 10.26730/1816-4528-2025-3-48-60
- Lagerev, A.V., Tolkachev, E. N., & Boslovyak, P. V. (2016). Design and research of conveyors with an overhead load-carrying belt: Monograph. RIO BSU. DOI: 10.5281/zenodo.1197308
- Lagerev, A. V., Tolkachev, E. N., & Goncharov, K. A. (2017). Modeling of work processes and design of multi-drive belt conveyors: Monograph. RIO BSU. DOI: 10.5281/zenodo.1196612
- Li, T., & Zhang, H. (b.d.). Design of motor condition monitoring system for coal mine belt conveyor. DOI: 10.54097/z4j84280 (Uwaga: brak roku wydania w źródle, stąd skrót b.d. – bez daty)
- Liu, I., Miao, C., Li, S., Ji, C., & Meng, D. (2021). Fault analysis method for tension belt conveyors based on acoustic and thermal image features. Measurement, Artykuł 110177. DOI: 10.1016/j.measurement.2021.110177
- Nielsen, S. S., Holm, R. K., Berg, N. I., & Rasmussen, P. O. (2020). Conveyor drive with magnetic mechanism - updated version. IEEE Energy Conversion Congress and Exposition 2020 (ECCE 2020) Proceedings, 285–292. DOI: 10.1109/ECCE44975.2020.9235375
- Nielsen, S. S., Holm, R. K., & Rasmussen, P. O. (2020). Highly integrated permanent gear magnet and motor conveyor system. IEEE Transactions on Industry Applications, 56(3), 2550–2559. DOI: 10.1109/TIA.2020.2977877
- Pediredla, V. S. A., Peravali, S., & Reddy, D. V. R. (2024). Digital transformation technologies for predictive maintenance of belt conveyors: A review. Indonesian Journal of Electrical Engineering and Computer Science, 36(1), 639–646. DOI: 10.11591/ijeecs.v36.i1.pp639-646
- Rami, M. K., Sumaya, Y., Samuel, B., & Yasir, S. (2023). Experimental vibration data for belt drive system under various operating conditions. Data in Brief, 48, Artykuł 109175. DOI: 10.1016/j.dib.2023.109175 (Uwaga: poprawiłem skrót tytułu czasopisma dib na pełną nazwę Data in Brief)
- Shandukh, A. A., Oghaily, A. A. F., & Al-Haddad, L. A. (2024). Failure analysis during preventive maintenance: Belt drive diagnosis using expert systems and Taguchi method for detecting unconventional vibration features. Heliyon, 10(13), Artykuł e34202. DOI: 10.1016/j.heliyon.2024.e34202
- Shimasaki, K., Zulhadj, M., Senu, T., Ishii, I., & Ito, T. (2021). Wide-area conveyor monitoring using panoramic vibration camera. ISIJ International, 61(10), 2587–2596. DOI: 10.2355/isijinternational.ISIJINT-2021-182
- Shrek, Y., Yakubyak, Y., & Zimroz, I. R. (2022). Mobile robotic system for automatic inspection of belt conveyors in mining industry. Energies, 15(1), Artykuł 327. DOI: 10.3390/en15010327
- Shurgach, D., Zhironkin, S., Föt, Š., Pokorny, J., Spring, E. D. J. S., Celar, M., Stempnyak, M., & Sobik, L. (2021). Thermographic study for operational condition assessment of belt conveyor drive system. Energies, 14(11), Artykuł 3258. DOI: 10.3390/en14113258
- Stempnyak, M., Zhironkin, V., Tshop, K., & Shurgach, D. (2019). Removal of systematic failure of belt conveyor drive by reducing vibrations. Engineering Failure Analysis, 99, 192–202. DOI: 10.1016/j.engfailanal.2019.02.028
- Stempnyak, M., Zhironkin, V., Tshop, K., & Shurgach, D. (2021). Preliminary studies to determine the thermal state of a belt conveyor drive in an underground coal mine. IOP Conference Series: Earth and Environmental Science, 684, Artykuł 012010. DOI: 10.1088/1755-1315/684/1/012010
- Thomas, K., Rahman, A., Ahamed, F., Shafi, F. B., Nahiduzzaman, & Khandakar, A. (2025). Comprehensive fault diagnosis of three-phase induction motors using synchronized multi-sensor data acquisition. Scientific Data, 12, Artykuł 1468. DOI: 10.1038/s41597-025-05437-3
- Trufanov, I., & Avksentyev, S. Y. (2019). Mathematical model of intermediate drive belt conveyor with partitions. IOP Conference Series: Earth and Environmental Science, 378(1), Artykuł 012033. DOI: 10.1088/1755-1315/378/1/012033
- Trufanov, I., & Serjan, S. (2019). Improving transportation efficiency: Intermediate drive belt conveyor. Journal of Mining Institute, 237(3), 331–335.
- Voznyak, D. (2025). Friction testing coefficient for drive systems of belt conveyors. Applied Sciences, 15(18), Artykuł 10204. DOI: 10.3390/app151810204
- Wang, L. [et al.] (2025). Lightweight GES-YOLO for edge-device real-time conveyor belt inspection. Machines, 13(2), Artykuł 126. DOI: 10.3390/machines13020126
- Windmann, S., Niggemann, O., & Stichwe, H. (2018). Calculation of energy-efficient speeds in transport systems. Automatisierungstechnik, 66(4), 308–319. DOI: 10.1515/auto-2017-0094
- Xi Zhang [et al.] (2024). Real-time conveyor belt defect detection using YOLOv5 + Grad-CAM. Applied Sciences, 14(16), Artykuł 6916. DOI: 10.3390/app14166916
- Yan, M. (2022). Study of digital hydraulic drive system for belt conveyor. Machines, 10(6), Artykuł 417. DOI: 10.3390/machines10060417
- Yang Zhifang [et al.] (2024). DFTNet for industrial conveyor monitoring: Accuracy and speed evaluation. Journal of Circuits, Systems and Computers [lub inne właściwe czasopismo wydawnictwa World Scientific]. DOI: 10.1142/S2301385024500249
- Yundre, R., Guge, N., Gavali, A., Pawar, P., & Vaidya, V. (2019). Conveyor machine speed control using PLC through product quality monitoring. International Research Journal of Engineering and Technology (IRJET), 6(2). https://mail.irjet.net/archives/V6/i2/IRJETV6I21582019062163902.pdf
- Zhang, L., Hao, J., Bao, J., Liu, T., Yin, Y., Dai, J., & Niu, Z. (2022). Control strategy and dynamic behavior of full permanent magnet driving belt conveyor. Journal of Mechanical Engineering, 58(21), 134–147. DOI: 10.3390/en15228699
- Zhou, C., Gong, H., Du, G., Zhang, Y., & He, H. (2022). Distributed permanent-magnet and direct-drive belt conveyor system and control strategy. Energies, 15(22), Artykuł 8699. DOI: 10.3390/en15228699
- Zhou, C., Shi, K., Xu, K., Du, G., & Gao, K. (2024). Optimized multi-motor power control strategy for distributed permanent-magnet direct-drive belt conveyors. Applied Sciences, 14(18), Artykuł 8343. DOI: 10.3390/app14188343
- Ziborov, Y. A., & Mnatsakanyan, V. U. (2022). Justification of geometric parameters of lining plates of drive drum of belt conveyor. Mining Science and Technology, 7(2), 170–179. DOI: 10.17073/2500-0632-2022-2-170-179
DOI: https://doi.org/10.2478/czoto-2026-0025 | Journal eISSN: 2657-5450
Language: English
Page range: 272 - 288
Submitted on: May 27, 2026
Accepted on: Jun 25, 2026
Published on: Jul 5, 2026
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2026 Baglan Omarbekova, Saiyn Bortebayev, Marcin Zawada, Michał Bembenek, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.