Application of the SREM Method in Filler Material Selection for Repair Welding
By: Dušan Arsić, Nikola Komatina, Ružica Nikolić and David Hečko
References
- Arsić, D., Ivković, D., Sudžum, R., Marinković, D., Komatina, N., 2025. Selection of Filler Metals for Repair Welding Using BWM-TOPSIS and BWM-RADAR Approaches. Materials 18, 5696. DOI: 10.3390/ma18245696
- Arsić, D., Lazić, V., Mitrović, S., Džunić, D., Aleksandrović, S., Djordjević, M., Nedeljković, B., 2016. Tribological behavior of four types of filler metals for hard facing under dry conditions. ILT 68, 729–736. DOI: 10.1108/ILT-10-2015-0156
- Arsić, M., Arsić, D., Flajs, Ž., Grbović, A., Todić, A., 2021. Application of Non-Destructive Testing for Condition Analysis, Repair of Damages and Integrity Assessment of Vital Steel Structures. Russian Journal of Nondestructive Testing 57, 918–931. DOI: 10.1134/S1061830921100053
- Arsić, D., Nikolić, R., Arsić, A., Cvetković, D., Bokuvka, O., & Mandić, V. 2026. Root cause assessment of welded satellite gear carrier failure in a bucket wheel excavator. Production Engineering Archives, 32(2), 230–240. DOI: 10.30657/pea.2026.32.19
- Bachchhav, B., Bharne, S., Choudhari, A., Pattanshetti, S., 2023. Selection of spot welding electrode material by AHP, TOPSIS, and SAW. Materials Today: Proceedings S2214785323007976. DOI: 10.1016/j.matpr.2023.02.253
- Hwang, C.L., Yoon, K., 1981. Methods for multiple attribute decision making. Multiple attribute decision making: methods and applications a state-of-the-art survey. pp. 58–191.
- Komatina, N., 2024. A compromise-based MADM approach for prioritizing failures: Integrating the RADAR method within the FMEA framework. Jurnal Sistem dan Manajemen Industri/ Journal of Industrial Systems and Management, 8, 73–88. DOI: 10.30656/jsmi.v8i2.9283
- Komatina, N., Petrović, N., Pamučar, D., Simić, V., Marinković, D., 2026. Multi-Criteria Ranking of Industrial Presses with Respect to Operational Performance Using the Square-Root based Evaluation Method (SREM). Facta Universitatis, Series: Mechanical Engineering Online First. DOI: 10.22190/FUME260305009K
- Lazic, V., Cukic, R., Aleksandrovic, S., Milosavljevic, D., Arsic, D., Nedeljkovic, B., Djordjevic, M., 2014. Techno-economic justification of reparatory hard facing of various working parts of mechanical systems. Tribology in Industry 36, 287.
- Lazic, V., Sedmak, A., Nikolic, R.R., Mutavdzic, M., Aleksandrovic, S., Krstic, B., Milosavljevic, D., 2015. Selection of the most appropriate welding technology for hardfacing of bucket teeth. Materiali in Tehnologije / Materials and Technology 49, 165–172.
- Nikolić, R. R., Marković, S., Arsić, D., Lazić, V., Hadzima, B., & Ulewicz, R. 2021. Influence of different hard-facing procedures on quality of surfaces of regenerated gears. Production Engineering Archives, 27(4), 257–264. DOI: 10.30657/pea.2021.27.34
- Rezaei, J., 2015. Best-worst multi-criteria decision-making method. Omega 53, 49–57. DOI: 10.1016/j.omega.2014.11.009
- Tanaskovic, D., Petrovic, S., Branislav Đorđevic, Matavž, A., Mijatovic, T., 2021a. Algorithm for defining quality of base material for repair welding. Structural Integrity and Life 21, 279–284.
- Tanaskovic, D., R. Djordjevic, B., Gajin, M., Arandelovic, M., Gostovic, N., Milovanovic, N., 2021b. Repair welding procedure and techno-economic analysis of burner pipe. Structural Integrity and Life 21, 85–90.
DOI: https://doi.org/10.2478/czoto-2026-0022 | Journal eISSN: 2657-5450
Language: English
Page range: 237 - 242
Submitted on: Jan 28, 2026
Accepted on: May 31, 2026
Published on: Jun 23, 2026
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Keywords:
Related subjects:
© 2026 Dušan Arsić, Nikola Komatina, Ružica Nikolić, David Hečko, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.