References
- Akhtar, Sh., 2010. Hydrogen Porosity in Al-Si Foundry Alloys. Department of Materials Science and Engineering, Norwegian University of Science and Technology. Trondheim: PhD Thesis.
- Brough, D., Jouhara, H., 2020. The aluminium industry: A review on state-of-the-art technologies, environmental impacts and possibilities for waste heat recovery. International Journal of Thermofluids, 1-2, 1 – 39, DOI: 10.1016/j.ijft.2019.100007.
- Cáceres, C. H., Selling, B. I.,1996. Casting defects and the tensile properties of an Al-Si-Mg alloy. Materials Science and Engineering A, 220(1), 109 – 116, DOI: 10.1016/S0921-5093(96)10433-0.
- Cullen, J. M., Allwood, J. M., 2013. Mapping the Global Flow of Aluminum: From Liquid Aluminum to End-Use Goods. Environmental Science & Technology, 47(7), 1 – 17, DOI: 10.1021/es304256s.
- Fan, P., Cockcroft, S. L., Maijer, D. M., Yao, L., Reilly, C., Phillion, A. B., 2019. Porosity Prediction in A356 Wheel Casting. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 50(5), 1 – 15, DOI: 10.1007/s11663-019-01642-9.
- Irfan, M. A., Schwam, D., Karve, A., Ryder, R., 2012. Porosity reduction and mechanical properties improvement in die cast engine blocks. Materials Science and Engineering A, 535(15), 108 – 114, DOI: 10.1016/j.msea.2011.12.049.
- Khalajzadeh, V., Beckermann, Ch., 2020. Simulation of Shrinkage Porosity Formation During Alloy Solidification. Metallurgical and Materials Transactions A, 51, 2239 – 2254, DOI: 10.1007/s11661-020-05699-z.
- Kuchariková, L., Porosity in Aluminum Alloy Castings. Encyclopedia of Aluminum and Its Alloys. CRC Press, Boca Raton.
- Lee. P.D., Chirazi, A., See, D., 2001. Modeling Microporosity in Aluminum-Silicon Alloys: A Review. Journal of Light Metals, 1(1), 15 – 30, DOI:10.1016/S1471-5317(00)00003-1.
- Li, S., Appelian, D., 2011. Hot tearing of aluminium alloys a critical literature review. International Journal of Mealcasting/Winter, 11, 23 – 40, DOI:10.1007/BF03355505.
- Mahta, M., Emamy, M., Cao, X., Campbell, J., 2008. Overview of Β-Al5FeSi phase in Al-Si alloys. Nova Science Publishers, Inc. New York, USA.
- Nicoletto, G., Konečná, R., Fintová, S., 2012. Characterization of microshrinkage casting defects of Al–Si alloys by X-ray computed tomography and metallography. International Journal of Fatigue, 41, 39 – 46, DOI: 10.1016/j.ijfatigue.2012.01.006.
- Paraskevas, D., Kellens, K., Dewulf, W., Duflou., 2013. Closed and Open Loop Recycling of Aluminium: A life Cycle Assessment perspective. IProceedings of 11th Global Conference on Sustainable Manufacturing. Innovative Solutions, 305 – 310.
- Phillion, A. B., Cockroft, S. L., Lee, P. D., 2008. A new methodology for measurement of semi-solid constitutive behavior and its application to examination of as-cast porosity and hot tearing in aluminum alloys. Materials Science and Engineering: A, 491(1-2), 237 – 247, DOI: 10.1016/j.msea.2008.01.078.
- Raabe, D., et al., 2022. Making sustainable aluminum by recycling scrap: The science of “dirty” alloys. Progress in Materials Science, 128, 1 – 150. DOI: 10.1016/j.pmatsci. 2022.100947.
- Roy, N., Samuel, A. M., Samuel, F. H., 1996. Porosity formation in AI-9 Wt Pct Si-3 Wt Pct Cu alloy systems: Metallographic observations. Metallurgical and Materials Transactions A, 27, 415 – 429, DOI: 10.1007/BF02648419.
- Samuel, F. H., 2017. On Porosity Formation in Al–Si–Cu Cast Alloys. In: Ratvik, A. (eds) Light Metals 2017. The Minerals, Metals & Materials Series. Springer, Cham. DOI: 10.1007/978-3-319-51541-0_33.
- Šurdová, Z., Kuchariková, L., Tillová, E., Pastierovičová, L., Chalupová, M., Uhríčik, M., Mikolajčík, M., 2022. The Influence of Fe Content on Corrosion Resistance of Secondary AlSi7Mg0.3 Cast Alloy with Increased Fe-content. In: Manufacturing technology: Engineering Science and Research Journal, 22(5), 598 – 604, DOI: 10.21062/mft.2022.073.
- Taylor, J., A., 2004. The effect of iron in Al-Si casting alloys. Proceedings of 35th Australian Foundry Institute National Conference, 1 – 11, DOI: 10.1016/j.mspro.2012.06.004.
- Taylor, J., A., 2012. Iron-containing intermetallic phases in Al-Si based casting alloys. Procedia Materials Science, 1, 19 – 33.
- Timelli, G., Caliari, D., Rakhmonov, J., 2016. Influence of Process Parameters and Sr Addition on the Microstructure and Casting Defects of LPDC A356 Alloy for Engine Blocks. Journal of Material Science and Technology, 32(6), 515 – 523, DOI: 10.1016/j.jmst.2016.03.010.
- Tuncay, T., Bayoğlu, S., 2017. The Effect of Iron Content on Microstructure and Mechanical Properties of A356 Cast Alloy. Metallurgical and Materials Transactions B, 48(2), 794 – 804, DOI: 10.1007/s11663-016-0909-1.