Glass and Glass-Ceramic Porous Materials for Biomedical Applications
By:
References
- Adams L., Essien E., Adesalu T., Julius M., 2017. Bioactive Glass 45S5 from Diatom Biosilica, Journal of Science: Advanced Materials and Devices 2, 476-482.
- Arcaro S., Goulart de Oliveira Maia B., Tramontin Souza M. et al., 2016. Thermal Insulating Foams Produced From Glass Waste and Banana Leaves, Materials Research 19.
- Borden M., WesterlundL. E., Lovric V., Walsh W., 2022. Controlling the bone regeneration properties of bioactive glass: Effect of particle shape and size, Journal of biomedical materials research, Applied biomaterials 110(4), 910-922.
- Borkowski, S., Ulewicz, R., Selejdak, J., Konstanciak, M., Klimecka-Tatar, D., 2012. The use of 3x3 matrix to evaluation of ribbed wire manufacturing technology, METAL 2012 – 21st International Conference on Metallurgy and Materials, 1722-1728..
- Cannio M., Belluci D., Roether J. A., Boccaccini D. N., Cannillo V., 2021. Bioactive Glass Applications: A Literature Review of Human Clinical Trials, Materials (Basel, Switzerland) 14(18):5440.
- Chakraborty S., Uppaluri R., Das C., 2020. Effect of Pore Former (Saw Dust) Characteristics on the Properties of Sub-micron Range, Low Cost Ceramic Membranes, International Journal of Ceramic Engineering & Science 2(5), 243-253.
- Daskalakis E., Liu F., Cooper G., Weightman A., Koc B., Blunn G., Bártolo, P., 2021. Bioglasses for Bone Tissue Engineering. Bio-Materials and Prototyping, Applications in Medicine 4,165-193.
- Dávalos J., Bonilla A., Villaquirán-Caicedo M. A., 2020. Preparation of glass–ceramic materials from coal ash and rice husk ash: Microstructural, physical and mechanical properties, Boletín de la Sociedad Española de Cerámica y Vidrio 60(3), 183-193.
- Dziadek M., Pawlik J., Cholewa-Kowalska K., 2015. Szkła bioaktywne w inżynierii tkankowej, Inżynieria Biomedyczna 20, 156-165.
- El-Wassefy N., Özcan M., Abo El-Farag S. A., 2021. Effect of Simultaneous Sintering of Bioglass to a Zirconia Core on Properties and Bond Strength, Materials (Basel, Switzerland) 14(23) :7107.
- Erasmus E., Johnson O., Sigalas I., Massera J., 2017. Effects of Sintering Temperature on Crystallization and Fabrication of Porous Bioactive Glass Scaffolds for Bone Regeneration, Scientific Reports 7:6046.
- Espinal L., 2012. Porosity and Its Measurement, Characterization of Materials, 1-10.
- Fernandes H.; Ferreira D., Andreola F. et al., 2014. Environmental friendly management of CRT glass by foaming with waste egg shells, calcite or dolomite, Ceramics Internationa 40(8), 371-379.
- Fu Q., Saiz E., Rahaman N., Tomsia A., 2011. Bioactive Glass Scaffolds for Bone Tissue Engineering: State of the Art and Future Perspectives, Mater Sci Eng C Mater Biol App 31(7), 1245-1256.
- Gerhardt L. C.; Boccaccini A. R., 2010. Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering, Materials (Basel, Switzerland), 3867-3910.
- Giglio R., Vieste G., Mondello T., Balduzzi G., Masserini B., Formenti I. et al., 2020. Efficacy and Safety of Bioactive Glass S53P4 as a Treatment for Diabetic Foot Osteomyelitis, The Journal of Foot and Ankle Surgery 60(2), 292-296.
- Hakim I. M., Mustaffar M., Ismail S., Ismail A., 2022. A Review of Porous Glass-Ceramic Production Process, Properties and Applications, Journal of Physics: Conference Series, 2169.
- Hench L. L., 2006. The Story of Bioglass, Journal of Materials Science. Materials in Medicine 17(11), 967-978.
- Kaur G., Pandey O. P., Singh K., Homa D., Scot B., Pickrell G., 2014. A review of bioactive glasses: Their structure, properties, fabrication and apatite formation, Journal of biomedical materials research Part A 102(1), 254-274.
- Kokubo T., Takadama H., 2006. How useful is SBF in predicting in vivo bone bioactivity?, Biomaterials 27, 2907-2915.
- Kuzior, A., Zozul'ak, J., 2019. Adaptation of the Idea of Phronesis in Contemporary Approach to Innovation, Management Systems in Production Engineering, 27(2), 84-87. DOI: 10.1515/mspe-2019-0014
- Leenakul W., Tunkasiri T., Tongsiri N. et al., 2016. Effect of sintering temperature variations on fabrication of 45S5 bioactive glass-ceramics using rice husk as a source for silica, Materials Science and Engineering C 61, 695-704.
- Lubas M., Zawada A., Przerada I., Iwaszko J., 2017. Stopień rozdrobnienia surowca spieniającego a porowatość szkła piankowego, Szkło i Ceramika 5, 19-22.
- Mabrouk M., 2015. PhD: Preparation of PVA/Bioactive Glass nanocomposite scaffolds. In vitro studies for applications as biomaterials. Association with active molecules.
- Mazzoni E., Iaquinta M., Lanzillotti, C. et al., 2021. Bioactive Materials for Soft Tissue Repair, Frontiers in Bioengineering and Biotechnology 9:613787.
- Montazerian M., Zanotto E., 2016. Bioactive Glass-ceramics: Processing, Properties and Applications, Bioactive Glasses: Fundamentals, Technology and Applications, 27-60.
- Opydo, M., Dudek, A., Kobyłecki, R., 2019. Characteristics of solids accumulation on steel samples during co-combustion of biomass and coal in a CFB boiler, Biomass and Bioenergy, 120, 291-300. DOI: 10.1016/j.biombioe.2018.11.027
- Pantulap U. M., Arango O., Boccaccini, A., 2022. Bioactive glasses incorporating lesscommon ions to improve biological and physical properties, Journal of Materials Science: Materials in Medicine 33:3.
- Pereira M., Oliveira J., Fonseca C., 2021. Influence of the use of rice husk as source of silica on the sol-gel synthesis of bioglass, Cerâmica 67, 333-337.
- Pietraszek, J., Radek, N., Goroshko, A.V., 2020. Challenges for the DOE methodology related to the introduction of Industry 4.0, Production Engineering Archives, 26(4), 190-194. DOI: 10.30657/pea.2020.26.33
- Radek, M., Pietraszek, A., Kozień, A., Radek, K., Pietraszek, J., 2023. Matching Computational Tools to User Competence Levels in Education of Engineering Data Processing, Materials Research Proceedings, 34, 453-459. DOI: 10.21741/9781644902691-52
- Radek, N., Pietraszek, J., Pasieczynski, Ł., 2019. Technology and application of antigraffiti coating systems for rolling stock, METAL 2019 – 28th Int. Conf. on Metallurgy and Materials, 1127-1132. DOI: 10.37904/metal.2019.909
- Scendo, M., Radek, N., Trela, J., 2013. Influence of laser treatment on the corrosive resistance of WC-Cu coating produced by electrospark deposition, International Journal of Electrochemical Science, 8(7), 9264-9277.
- Scendo, M., Trela, J., Radek, N., 2012. Purine as an effective corrosion inhibitor for stainless steel in chloride acid solutions, Corrosion Reviews, 30(1-2), 33-45. DOI: 10.1515/CORRREV-2011-0039
- Serbena F., Mathias I., Foerster C., Zanotto E., 2015. Crystallization toughening of a model glass-ceramic, Acta Materialia 86, 216-228.
- Serna-Jiménez J. A.; Luna-Lama F., Caballero Á. et al, 2021. Valorisation of Banana Peel Waste as a Precursor Material for Different Renewable Energy Systems, Biomass and bioenergy 155:106279.
- Ulewicz, R., 2018. Outsorcing quality control in the automotive industry, MATEC Web of Conf., 183, art.03001. DOI: 10.1051/matecconf/201818303001
- Yang S., Leong K. F., Du Z., Chua C. K., 2001. The design of scaffolds for use in tissue engineering. Part I. Traditional factors, Tissue engineering 7(6), 679–689.
- Youssef H., Safwa N., Shehata R. et al., 2022. Synthesis of Natural Nano-Hydroxyapatite from Snail Shells and Its Biological Activity: Antimicrobial, Antibiofilm, Membranes 12(4), 408.
- Zaini H., Roslan J., Saallah S. et al., 2022. Banana peels as a bioactive ingredient and its potential application in the food industry, Journal of Functional Foods 92.
- Zhang R., Qi J., Gong M. et al., 2021. Effects of 45S5 bioactive glass on the remineralization of early carious lesions in deciduous teeth: an in vitro study, BMC Oral Health 21(1):576.
DOI: https://doi.org/10.2478/czoto-2023-0033 | Journal eISSN: 2657-5450
Language: English
Page range: 302 - 310
Submitted on: Oct 25, 2023
Accepted on: Dec 6, 2023
Published on: Dec 29, 2023
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2023 Olga Kędzia, Małgorzata Lubas, Agata Dudek, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.