References
- Bajdur, W.M., Włodarczyk-Makuła, M., Idzikowski, A., 2016. A new synthetic polymers used in removal of pollutants from industrial effluents, Desalination and Water Treatment, 57(3), 1038-1049. DOI: 10.1080/19443994.2015.1043495
- Chądzyńska, M., Klimecka-Tatar, D., 2017. Use the quality management tool, which is the Ishikawa Diagram on the example of small leather business, Archives of Engineering Knowledge, 2 (1), 20-22.
- Ciecińska,B., Oleksiak, B. 2023.The use of quality management tools to ensure safe working conditions at CO2 laser workstations, Production Engineering Archives,29 (4), 393-400.
- Czerwińska, K., Pacana, A., Ulewicz, R. 2020. Analysis of the diagnostic process of castings used in automotive, Materials Research Proceedings, 17, 203-210.
- Czerwińska, K., Piwowarczyk, A. 2022. The use of combined quality management instruments to analyze the causes of non-conformities in the castings of the cover of the rail vehicle bearing housing, Production Engineering Archives, 28 (3), 289-294.
- Djoković, J.M., Nikolić, R.R., Bujnak, J., Hadzima, B., Pastorek, F., Dwornicka, R., Ulewicz, R., 2022. Selection of the Optimal Window Type and Orientation for the Two Cities in Serbia and One in Slovakia, Energies, 15(1), art. 323. DOI: 10.3390/en15010323
- Dudek, A., Lisiecka, B., Ulewicz, R., 2017. The effect of alloying method on the structure and properties of sintered stainless steel, Archives of Metallurgy and Materials, 62(1), 281-287. DOI: 10.1515/amm-2017-0042
- Franta A., Zając D., 2022. Carbon fiber reinforced polymer and tensegrity structures in search of model architectural and engineering solutions, Technical Transactions, 119, art. e2022013. DOI: 10.37705/TechTrans/e2022013
- Frontczak M., Hachaj T., 2022. How many neurons are needed to make a short-term prediction of the Bitcoin exchange rate?, Technical Transactions, 119, art. e2022011. DOI: 10.37705/TechTrans/e2022011
- Gadek-Moszczak, A., Żmudka, S., 2013. Description of 3D microstructure of the composites with polypropylene (pp) matrix and tuf particles fillers, Solid State Phenomena, 197, 186-191. DOI: 10.4028/www.scientific.net/SSP.197.186
- Jagusiak-Kocik, M. 2021. The Practical Use of the QFD Method in Relation to a Passive House Project, Construction of Optimized Energy Potential, vol. 10, nr 2.
- Jagusiak-Kocik, M. 2022. Using the Advantages of the KANO Model in the Process of Designing a Modern Summer House. Construction of Optimized Energy Potential, vol. 11.
- Knop, K., Ulewicz, R. 2022. Solving Critical Quality Problems by Detecting and Eliminating their Root Causes – Case-Study from the Automotive Industry, Materials Research Proceedings, 24, 181-188.
- Krynke, M., Mielczarek, K., Jagusiak-Kocik, M., Kiełbus, A. 2021. Quality management in the methodology of designing rotation mechanisms for large-size machines, METAL 2021 – 30th Anniversary International Conference on Metallurgy and Materials, Ostrava, Tanger, 1446-1452.
- Kuzior, A., 2022. Technological Unemployment in the Perspective of Industry 4.0 Development, Virtual Economics, 5(1), 7-23. DOI: 10.34021/VE.2022.05.01(1)
- Kuzior, A., Zozul'ak, J., 2019. Adaptation of the Idea of Phronesis in Contemporary Approach to Innovation, Management Systems in Production Engineering, 27(2), 84-87. DOI: 10.1515/mspe-2019-0014
- Luca L., Pasare M., Stancioiu A., 2017. Study to Determine a New Model of the Ishikawa Diagram for Quality Improvement. Fiability & Durability, 1.
- Mazur, K., Gadek-Moszczak, A., Liber-Knec, A., Kuciel, S., 2021. Mechanical behavior and morphological study of polytetrafluoroethylene (PTFE) composites under static and cyclic loading condition, Materials, 14(7), art.1712-. DOI: 10.3390/ma14071712
- Mazur, M., 2018. Analysis of production incompatibilities and risk level in series production of assembly elements for the automotive industry, MATEC Web of Conf., 183, art. 03011. DOI: 10.1051/matecconf/201818303011
- Mizuno S., 2020. Management for Quality Improvement: the 7 New QC Tools. CRC Press.
- Pacana, A., Czerwińska, K. 2020. Improving the quality level in the automotive industry, Production Engineering Archives, 26 (4), 162-166.
- Pacana, A., Czerwińska, K. 2019. Analysis of the causes of control panel inconsistencies in the gravitational casting process by means of quality management instruments, Production Engineering Archives, 25, 12-16.
- Pietraszek, J., Radek, N., Goroshko, A.V., 2020. Challenges for the DOE methodology related to the introduction of Industry 4.0, Production Engineering Archives, 26(4), 190-194. DOI: 10.30657/pea.2020.26.33
- Radek, M., Pietraszek, A., Kozień, A., Radek, K., Pietraszek, J., 2023. Matching Computational Tools to User Competence Levels in Education of Engineering Data Processing, Materials Research Proceedings, 34, 453-459. DOI: 10.21741/9781644902691-52
- Siwiec, D., Pacana, A. 2019. The use of quality management techniques to analyse the cluster of porosities on the turbine outlet nozzle, Production Engineering Archives, 24, 33-36.
- Siwiec, D., Pacana, A. 2021. Method of improve the level of product quality, Production Engineering Archives, 27(1), 1-7.
- Szewczyk-Nykiel A., 2023. The influence of carbide reinforcement on the properties of sintered aluminium alloy matrix composites, Technical Transactions, 120, art. e2023005. DOI: 10.37705/TechTrans/e2023005
- Ulewicz, R. 2014. Practical application of quality tools in the cast iron foundry, Manufacturing Technology, 14(1), pp. 104-111.
- Ulewicz, R., Mazur, M., Knop, K., Dwornicka, R., 2020. Logistic controlling processes and quality issues in a cast iron foundry, Materials Research Proceedings, 17, 65-71. DOI: 10.21741/9781644901038-10
- Ulewicz, R., Novy, F., 2015. Fatigue properties of ADI cast iron, METAL 2015 - 24th International Conference on Metallurgy and Materials, Ostrava, Tanger, 892-897.
- Ulewicz, R., Szataniak, P., Nový, F., Trško, L., Bokůvka, O., 2016. Fatigue characteristics of structural steels in the gigacycle region of loading, 33rd Danubia Adria Symposium on Advances in Experimental Mechanics, 90-91.
- Urbaniak M. 2004, Zarządzanie jakością. Teoria i praktyka, Wydawnictwo Diffin, Warszawa.
- Urbański A., Ligęza S., Przecherski P., 2023. The modelling of layered rocks using a numerical homogenisation technique and an artificial neural network, Technical Transactions, 120, art. e2023007. DOI: 10.37705/TechTrans/e2023007
- Yearley, D., Berliński, D. 2022. Bezpieczny plac zabaw poradnik dla administratorów i właścicieli, Urząd Ochrony Konkurencji i Konsumentów.