Influence of Technical Condition of Control and Measurement Equipment on Calibration Results
References
- Arendarski, J., Gliwa-Gliwińśki, J., Jabłoński, Z., Ratajczyk, E., Tomasik (red.), J., Żebrowska-Łucyk, S., 2009. Sprawdzanie przyrządów do pomiarów długości i kąta, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa.
- Bellman, R., 1960. Introduction to matrix analysis, McGraw-Hill, New York.
- Doyle, J., F., 2004. Modern experimental stress analysis, Willey, Chichester.
- Draper, N.R., Smith, H., 1981. Applied regression analysis, Willey, New York.
- Hagel, R., 1975. Miernictwo dynamiczne, Wydawnictwa Naukowo-Techniczne, Warszawa.
- Horn, R.A., Johnson, C., 1986. Matrix analysis, Cambridge University Press, Cambridge.
- IEC 60050-301:2000. International Electrotechnical Vocabulary (IEV) - Part 301: General terms on measurements in electricity.
- International Dictionary of Basic and General Metrology Terms, 1993. Central Office of Measures, Warsaw.
- ISO 14978:2018. Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment
- ISO 9000:2015a. Quality management system – Fundamentals and vocabulary.
- ISO 9001:2015b. Quality management systems – Requirements.
- ISO/IEC 17025:2017. General requirements for the competence of testing and calibration laboratories
- ISO/IEC Guide 99:2010. International vocabulary of metrology - Basic and general concepts and associated terms (VIM)
- Jakubiec, W., Malinowski, J., 2004. Metrologia wielkości geometrycznych, Wydawnictwa Naukowo-Techniczne, Warszawa.
- Jakubiec, W., Zator, S., Majda, P., 2014. Metrologia, Polskie Wydawnictwo Ekonomiczne S.A., Warszawa.
- Lawson, C., Hanson, R.J., 1974. Solving least squares problems, Prentice-Hall, Englewod Cliffs.
- Ostasz G., Czerwińska, K., Pacana, A., 2020. Quality management of aluminum pistons with the use of quality control points, Management Systems in Production Engineering, 28(1), 29-33.
- Pacana A., Czerwińska K., Bednarowa L., 2018. Comprehensive improvement of the surface quality of the diesel engine piston, Metalirgija, 58, 3-4, 2018, 329-332.
- Piotrowski, J., Kostyrko, K., 2012. Wzorcowanie aparatury pomiarowej, Wydawnictwo Naukowe PWN S.A., Warszawa.
- Siwiec, D., Bednárowá, L., Pacana, A., Zawada, M., Rusko, M., 2019. Decision support in the selection of fluorescent penetrants for industrial non-destructive testing. Przemysł Chemiczny, 98(10), 1594-1596.
- Siwiec, D., Pacana, A., 2021. Method of improve the level of product quality. Production Engineering Archives, 27(1), 1–7. <a href="https://doi.org/10.30657/pea.2021.27.1" target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">https://doi.org/10.30657/pea.2021.27.1</a>
- Tikhonov, A.N., Arsenin, V.Y., 1977. Solutions of ill-posed problems, Willey, New York.
- Willkinson, J.H., 1965. The algebraic eigenvalue problem, Clarendon Press, Oxford.
DOI: https://doi.org/10.2478/czoto-2021-0009 | Journal eISSN: 2657-5450
Language: English
Page range: 79 - 88
Submitted on: Dec 6, 2020
Accepted on: Mar 25, 2021
Published on: Jun 20, 2021
Published by: Quality and Production Managers Association
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2021 Małgorzata Kawalec, Czerwińska Karolina, Andrzej Pacana, published by Quality and Production Managers Association
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.